Hobbyplus Cr18p EVO PRO ( Sunny Sunday Creek Crawl!) (furitek cedar and V2 rear axles test!)

[@tariqrahman6918]

Looks awesome bro

[@andrewrichey7374]

Sure is a awesome place RC heaven for sure 👍👍😎

[@Trevit86]

Does your cedar motor have that black adapter spacer thing attached to it or is just the motor? I got a cedar I want take out of my Trx4m just not sure it will fit.

[@andrewrichey7374]

Whoops happens to the best of us, I was wanting to see underneath the rig anyways

[@nj2033]

Great video man! Subscribed!

[@HaasesHighlife]

Thanks man I appreciate you!!!

[@tariqrahman6918]

Can it go in the water? Or will your cool metal gear get rusty? It is waterproof, right?

[@Casitascrawlers]

I ordered both the front & rear axles & front aluminum portal covers y order was shipped minus the front axle just like you it’s kind of weird that they have the rear but not the front in stock anyways just gotta wait 🤷🏻‍♂️

[@andrewrichey7374]

Thank you enjoyed the video a lot, this is my passion also. I’ll be watching for the next one until then peace and chicken grease 😁👋👋😎

[@AllShadowFox]

Nice looking rig! What lights did you use? I’ve been looking for some for mine but having trouble.

[@patrickpiche135]

Sweet build and those wheels look amazing. Love your details 👍

[@andrewrichey7374]

Wow sweet looking rig, just subscribed I’ll be watching for more

[@andrewrichey7374]

Yeah that was nice climb right there what a beautiful spot love the running water the scenery is awesome

[@wingnutbert9685]

Great rig and video! Turbines look perfect on that! ???- Any idea if narrower hex's could be swapped in to narrow the track width? Or if you know of another way to narrow the width? Thanks!

[@HaasesHighlife]

Heyy sorry for the late response thanks for the comments and watching to answer your question the best way would probably be the buy then same axle shafts as the furitek fx118 and any fx118 hex it's 10mm less on both sides to run it like that I'm sure you could find them on furiteks website or on helidirect.com hope that helps get ya in the right direction!

[@shirleylarkan5654]

Love your videos at the river. Rig is looking AMAZING. Did the 70mm tires fit on the standard axle set up or did you have to use hex adaptors to widen?

[@HaasesHighlife]

Thanks you so much I appreciate you!! The plus 10mm hex adapters come stock on the Evo pro so it's already wide enough the 70mm fits stock no problem I've even lowered the front of my body down the only time I had to trim the fenders was when running the 74mm tires but even then I only sanded the front fenders slightly hope that helps thanks for watching!

[@EricsRC]

Sick! What size are the turbine wheels?

[@HaasesHighlife]

Thanks man!! Appreciate you!!They are 1.3 here's a link for ya 👇 INJORA 1.3" Beadlock Wheel - CNC Aluminium Rim for TRX4M SCX24 1/24 1/18 RC Crawler Car Upgrade(Rainbow) a.co/d/d7YQC1p

[@EricsRC]

@@HaasesHighlife Fuck yeah man!! Thank you!!

[@MtOlympusRC]

What light kits do you have on there???

[@northernlightsrc8994]

Hey man could you tell me where you got that steering link? I was searching for that color. Nice rig sir. 🎉

[@HaasesHighlife]

The same steering links for the fx118 fit this axle as well the link for the one I’m useing is below 👇 keep in mind I found out the hard way that the servo mount it comes with isn’t the same and my servo would hit the motor since the new mount would push it back to far since then I’ve changed motors and servos so I’m gonna see if it works now this week but links match up perfectly www.ebay.com/itm/204576960253?chn=ps&var=505160155245&_trkparms=ispr%3D1&amdata=enc%3A1DtN-YLbSQ-ecA5ClWYKgiQ43&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=505160155245_204576960253&targetid=1583904486362&device=m&mktype=pla&googleloc=9005119&poi=&campaignid=19894961968&mkgroupid=148855406073&rlsatarget=pla-1583904486362&abcId=9307911&merchantid=114600901&gad_source=1&gbraid=0AAAAAD_QDh-0JpiHFmeqr427NNF2j6pF2&gclid=EAIaIQobChMIsLi3zrO8hAMV6WZHAR3AkQeUEAQYDSABEgIDWvD_BwE

[@andrewrichey7374]

Yeah again that was nice driving

[@seanhartigan5040]

Thanks Haas, I have one too now, not quite as pimped as yours (yet). What a time to be into crawlers!

[@HaasesHighlife]

Yet is right mann!! Hope your enjoying yours can't wait to see what everyone does with theirs!! Seriously tho I chose a wonderful time to get into the hobby the markets have been flooded with options can wait to see what this year brings 😁 Thanks for watching and commenting I appreciate you tons!!

[@adamdieter3714]

Awesome video man. Where do I find the brass hex extenders and the rock lights?

[@HaasesHighlife]

My apologies it's been a hectic Monday but I have some links for you for the part you mentioned check below I hope this helps thanks for watching and commenting I appreciate you tons!! 👇 The hexs are for the fx118 but it's the same axles so everything fits I just didn't use to shalfs cuz we already have the same extended one on the Evo stock 👇 www.helidirect.com/products/furitek-extended-axle-shaft-10mm-with-brass-hex-for-furitek-fx118?variant=40272653582413 The light list is here 👇 INJORA Roof Light Bar -16LED Lamp... www.amazon.com/dp/B0BTLX6YM4?ref=ppx_pop_mob_ap_share 2PCS HIRCQOO 1/10 RC Car LED... www.amazon.com/dp/B09WQX2QF2?ref=ppx_pop_mob_ap_share www.ebay.com/itm/155419676763

[@adamdieter3714]

@@HaasesHighlife Thank you bro I appreciate it. I just ordered a few of the parts you have, next is the axles.

[@HaasesHighlife]

@@adamdieter3714 sweet I honestly love this rig it's come together nicely and this terrain just doesn't show all of it strengths when crawling but soon I'll have more vids on my indoor course and a build break down just waiting on this dang front axle lol hope you've been enjoying yours keep me posted with the upgrades let me know how it feels after or if you have any questions shout out I'll be here appreciate you again!

[@EricsRC]

What pinion gear is needed to swap for the cedar?

[@HaasesHighlife]

Trx4m furitek pinion gear! I baught the TRX4M cedar motor had it already on it hope that helps

[@HaasesHighlife]

I believe it's 15t

[@robertharvey531]

Do you happen to have a link to the high clearance links you have on there? I haven’t been able to find any that are Evo specific.

[@HaasesHighlife]

Ya of course I do these are the ones here 👇 also any thing for the furitek fury wagon fx118 fits the evo RCAWD for Hobby Plus CR18P RC Linkage High Clearance Tie Rods Set Link for Rock Van, Trail Hunter, EVO Harvest, FUR-2411 Upgrades Parts Sliver a.co/d/7sBorJN

[@DTW-bx2vy]

How much did the reverse rotation rear axle help your rig? It didn't do anything for my rig besides change the wheel that lifts in the front when it torque flexes. The reverse rotation rear axle was a waste of money in my opinion & did nothing to increase climbing performance one bit

[@HaasesHighlife]

Honestly I think it helps a ton with the torque twist in all climbing situations I also have bands on my shocks and a perfect weight distribution and also I noticed a lot less torque twist after changing the shocks I went with 59mm injora shocks and over drive definitely helps as well mine will climb straight up and down idk if I just got lucky doing something that worked or what but I'm pretty happy with how she's working lately so you have bands on the shocks or too much weight in the ear seems to really let the torque twist over do it's self

[@russellhall784]

Over driving the front dosnt like the ice .wheels going different soeeds upsets the traction into slides

[@nj2033]

Whilst on a steep sidehill, but you should be able to steer into it to fix that... Overdrive is really good for steep inclines and declines though

[@andrewrichey7374]

That was nice driving love that slow controlled crawl