Hobie Kayak Passport 10.5' & 12' Seat Mods || Increasing seat height

[@richardgibson7530]

Thanks for the vid, great job. I made mine today. I'd suggest starting with the aft/lowest horizontal piece. Make certain the T-pieces fit perfectly into the 9" deck grooves. Make the front/lowest part to match, and rest is super easy. Measure twice, cut once, glue very very last. Can't wait to try it out. Now I can fit two 3600 boxes under the seat.

[@PeterRanieriII]

you sir (and your buddy) are geniuses, thanks for sharing

[@coloradohrfishin]

I won’t go that far but thank you very much for the compliment!!! 😀

[@owenfeng8712]

Thank you, that 's a beautiful work.

[@ETuss713]

I fish out of a passport 12.0 year around in the Tx coast. Ive added both map pockets, h crate, fish finder, rectangular hatch, XL rudder, anchor trolley, 6mm deck pad kit from Louisiana custom kayaks, and 2 more 4" tracks behind the seat on the starboard and port rails. The XL passport rudder and the vertical rectangular hatch had the biggest and most instant impact on my fishing. If you havent done those 2 things, I highly recommend them. Great content sir. The seat is the biggest downfall of the passport. Ive measured other seats from hobie and other manufacturers to see if it can be swapped. I settled on a 4" seat cushion. Your idea is a great option.

[@coloradohrfishin]

I still have more to add to mine just like you. It is taking season after season for the add-ons. I will have to try some do what you suggest. Thank you for the kind remarks and let’s continue to enjoy the outdoors that we have! 👍

[@briarfox637]

I just ordered the rotomolded version for going to the coast in Galveston.

[@ETuss713]

@@briarfox637 Fishing tackle Unlimoted on 45 and fuqua has a few on stock I saw yesterday.

[@briarfox637]

@@ETuss713 There website must not have been updated. I ordered already from EcoFishSop. Should be shipping out in a couple days. Love FTU though.

[@randyfitt8959]

Great video! I fish out of a 10.5 Passport, I’ve upgraded the rudder, added map pockets and an extra hatch. I like this idea. I added an H bar standing assist so I can stand up and stretch. Not stable enough to stand up and fish. I post fishing videos on my channel too.

[@coloradohrfishin]

Thanks Randy! I continue to make some additional mods to my kayak and I do agree with you, it is very hard to stand in and therefore I increased the height of the seat to help with some sight fishing and getting in and out of my kayak easier. I also just subscribed to your channel!!!

[@randyfitt8959]

@@coloradohrfishin Thanks for the sub! We both have right around 100. Are you concerned about the stability when you’re sitting in your elevated seat?

[@coloradohrfishin]

Randy, the stability was shaky at the beginning but made some tighter adjustments to all the access points on the PVC. I am stably now, but like all kayaks, it will depend on the boat traffic and waves!

[@brianhofmann5588]

Which H Bar did you use on your Passport 10.5. I need it for the same reason you do to just get up. Plus getting out and in of the kayak will be easier.

[@coloradohrfishin]

At this time I do not have an H Bar installed. With the raising for my seat it has helped me to get in and out much easier. I maybe looking at that for next year.

[@theoccasionalangler6956]

Great idea, two quick questions, could you please put a parts list in the description. Second, I have the passport 12 and I am about to mount a transducer for my fish finder using the thru hull kit. The transducer cable routes through the scupper hole between the seat and the hatch and then back into the hull about 2”in front of that . I am wondering if the fron support of the seat would sit on the transducer cable?

[@coloradohrfishin]

Thank you. I will try and add that in the description as time allows. For the other question I do not believe it should cause any issues or problems. If it dies you can still make additional adjustments.

[@encidz]

I have a Passport 12, and I just finished this mod. I had to make a few changes from his design for the 10. Check out my post here: www.reddit.com/r/kayakfishing/comments/xen97v/hobie_passport_12_seat_mod_custom_riser_using_pvc/

[@ReplayFan562]

Thanks for sharing.

[@southernlife251]

Thank you for posting this video. Your design is ingenious in my opinion. The seat that comes with the Passport is awful. I have followed your instructions to mod my seat and it is so much better on the old knees getting in and out of the boat. I decided not to glue the vertical pieces so if I choose to change the height, I can just cut new lengths of pvc to adjust accordingly. I also adjusted the length of the vertical pieces to have the seat in a slight recline position which is much more comfortable. The extra seat height does change the center of gravity of the boat somewhat, but it is still very stable.

[@coloradohrfishin]

Glad this video helped you out. I agree that it makes it easier pedaling and getting in and out of the boat but yes, center of gravity changes. Good luck on the waters!!!

[@kevinzissimos8639]

Raising the seat didn’t give you any stability issues ?

[@coloradohrfishin]

Minor stability issues. Now if you go higher than what I did it will. The less of a raise, your comfort level, will give you the stability.

[@sugaradaddy]

good video! I copied your design but overlooked one detail. I used a 3 way pvc elbow. This brought the tree connectors closer. I couldnt bring them out much anyway because a weld near the corner on one side. You got the mesh to fit trees in front so nice. mine is too loose. I haven't tried mine on the water yet. did you feel any leg discomfort after pedaling? just curious. thank you!

[@coloradohrfishin]

Glad this helped you out.👍 It has been a life saver to me in many ways. As for the discomfort, there are at times but that is when I am pedaling all the time or keep my feet on the pedals. Taking them off at various times and stretching makes it much more bearable.

[@frostynadz6042]

Finally, a nice cheap solution. I almost considered selling my kayak because of the seat. Did this help you move around alot easier ?

[@coloradohrfishin]

Yes, it definitely makes it easier in many ways. Learning the new balance point will be needed but I have had lots of luck with this adjustment.

[@frostynadz6042]

@@coloradohrfishin Just wanted to give a big thanks, I put mine together last weekend and tried it out sunday. A big difference and well worth it. I can move around alot more and I can finally put my favorite lure box under the seat.

[@coloradohrfishin]

@@frostynadz6042 I am happy to hear and glad I could help. Now time for you to enjoy comfort time on the waters!

[@jarenanstine4361]

Looks great!! How’s the stability?

[@coloradohrfishin]

Took it out twice so far and since I didn’t go to excessive with the height, it has been pretty stable for me. Just do not go to high with the modifications.

[@pxfishing]

Nice, I have been thinking about doing the same thing, you beat me to it, very nice, just wonder how much weight the pvc can hold

[@coloradohrfishin]

Thank you! I have sat in it and with my weight of 180 it held very well. The more weight the more support you will require to support it.

[@briarfox637]

It will hold quite a bit since the pieces supporting the weight are vertical.

[@pxfishing]

@@briarfox637 😆 it’s been a year ago since I asked, since then, I also made one and love it, but I just upgrade to a PA so much better

[@briarfox637]

@@pxfishing lol didn't notice it was a year ago. I'm actually downgrading. Didn't like the PA, didn't like my outback. I'm very minimalist and those other 2 were also very heavy.

[@gwendalgerard3882]

super travail !!!! Merci 😉😉😉

[@coloradohrfishin]

Gracias!! Espero que esto te ayude 😊👍

[@footyfan6967]

having the hardest time finding the Snap T's. Where did you find them?

[@coloradohrfishin]

Here is where I bought it from. Hope this helps! sprinklerwarehouse.com/

[@coloradohrfishin]

For all those who had asked...I have listed the pieces you need to do this MOD. I do appreciate you all asking this and apologies for being late!

[@randylambert3834]

Will this still snap in place like the original seat or does it just sit in the kayak?

[@coloradohrfishin]

It will still snap into the seat latch/hook in the back with no issue at all. Hope this is what you are looking for as an answer.

[@randylambert3834]

@@coloradohrfishin Yes thank you that answers my question.

[@shirmworm]

WHERE DID THE SEAT COME FROM?? WHAT YEAR??

[@coloradohrfishin]

This seat is from a 2020 Hobie Mirage Passport. Hope this helps!

[@garybeckwith9045]

What is the official name of that "special order" tee fitting that fits on the rail? My interweb searches reveal nothing. Thank you.

[@coloradohrfishin]

You can order these from Sprinkler Warehouse. If you look at the description for this video it does list all parts. Let me know if there is anything else you may need! 😊

[@MrCubanito321]

Nice had that vote , and yeah your hips needs to be above the pedals otherwise you will be so uncomfortable , nice job

[@coloradohrfishin]

Thank you for the remarks. This makes it much easier overall to get in and out along with less aches in the joints!

[@faycelgram6345]

whats the name of the two pieces you had to order online

[@coloradohrfishin]

Sure thing…here it is: Snap Tree item was purchased at Sprinkler Warehouse online 4 of the SCH 40 PVC Snap Tree 1/2" slip x snap | 463-005 www.sprinklerwarehouse.com

[@georgesolana1625]

Can’t find the dimensions or parts list. Is it coming or am I missing it? Thanks!

[@coloradohrfishin]

This is at the very end of the video and also in the description portion now for all the materials.

[@jordanwilliamson1892]

Whats th gap measurement on those tees that connect to the seat frame ? I'm just gonna get tees and cut my own gaps with a bandsaw

[@coloradohrfishin]

Jordan, I am away on a very short trip but will get that information for you when I return within the next two days. Stay tuned!

[@coloradohrfishin]

The gap within the snap Tee measures at 9/16 of an inch. This allows for it to snap on tightly to the bar. Hope this helps you out.

[@jordanwilliamson1892]

@@coloradohrfishin yessir thats what I needed. Thank you !

[@felipemelo8331]

Very nice, congratulations. An opinion could have the measurements... 😂

[@coloradohrfishin]

That does make sense. I will try and see if I can get some of those dimensions but it may very depending on how you are setting it up.

[@steveberryhill1039]

Where did you order the tee with the spilt from

[@coloradohrfishin]

Sprinkler warehouse and here is that link…www.sprinklerwarehouse.com/catalogsearch/result/?q=Snap+tees. This is the size Sch. 40 PVC Snap Tee 1/2 in. Slip x Snap | 463-005

[@Saltloony]

Looks good, spray paint it black and you won't even know it.

[@adelmofishingbrasil]

Top ideia top

[@coloradohrfishin]

Thank you Adelmo!

[@faycelgram6345]

This is only duable for your kayak 10.5 not on the 12.5 it is completely different look it up

[@henrikbocarlsen]

But why? Less stability, more fragile construction….

[@coloradohrfishin]

I kept it a lower height for me and stability was still there. If you go crazy on how high you out it in inches, yes, it will most definitely effect it. Much easier for me to sit in it when you get to my age too! 😊👍

[@CheekyMonkey888]

yeah, best part of the passport is the low seat height, so stable you can nap on the water

[@coloradohrfishin]

@@CheekyMonkey888, I hear ya but for me I needed a slight riser. Thanks for the comments and continue to do so and if possible, follow my channel!