Hollowing with the Woodcut Tools Pro-Forme Hollower- Phil Irons

  Рет қаралды 26,138

Woodcut-Tools

Woodcut-Tools

Күн бұрын

Пікірлер: 13
@trevorholmes35
@trevorholmes35 2 жыл бұрын
Love it. You guys are totally nuts. 😍👍
@woodcuttoolsnz
@woodcuttoolsnz 2 жыл бұрын
Don't hesitate to contact us should you require and information on our product range. suppor@woodcut-tools.com
@jonathanmangold5024
@jonathanmangold5024 4 жыл бұрын
lovely piece of wood
@BipolarBowler
@BipolarBowler 4 жыл бұрын
I got one of those Woodcut hollowers too. It sure beats the hell out of those scraper tipped hollowers.
@TurningWorks
@TurningWorks 7 жыл бұрын
You make that look so easy! 👍🍺
@larryhill6187
@larryhill6187 5 жыл бұрын
what rpms and what is the diameter of the turning
@RayShaw007
@RayShaw007 3 жыл бұрын
A good demo of deep hollowing w/o the use of a stabilser. You make it look easy. At first I thought you were using dry wood but you said near the end that you'd leave it to dry, What's your experience of deep hollowing dry wood or is this best being avoided? BTW I assume the woodcut hollowing tool is more or less a ring cutter with a limiter but I couldn't quite see the detail in the head. A good vid for showing technique and how you progress down the vase. Thanks for sharing
@woodcuttoolsnz
@woodcuttoolsnz 3 жыл бұрын
Hi Ray, thank you for your comments and query. Yes the Woodcut pro Forme Hollower to hollow wet and dry wood. We recommend for hollowing dry wood to ensure the cutter is sharp which is easily achieved with a diamond hone. Then approach the hollowing in sections and let the cutter do the work for you, don't force the cutter. The Woodcut Pro Forme user guide explains this in more detail, please email us support@woodcut-tools.com if you would like a copy of the user guide. Best regards Dan
@masjabrikdiy8422
@masjabrikdiy8422 3 жыл бұрын
Selamat sore waktu indonesia teman.pahat jenis apa itu bahannya.sangat tajam.sekali buat bubut dalam .
@woodcuttoolsnz
@woodcuttoolsnz 3 жыл бұрын
Hello, thank you for your message. The material for this cutter is M2 high speed steel (HSS) which is triple tempered. Please let us know if you require additional information. Best regards Dan
@artesmoinhomoveisrustico3879
@artesmoinhomoveisrustico3879 6 жыл бұрын
👏👏👏👏👏
@kc696969
@kc696969 Жыл бұрын
The video was OK. However, it only showed you doing the same thing repeatedly. Kind of boring really.
@hswing11
@hswing11 11 ай бұрын
BUNCH OF NOTHING TOTAL WASTED VIDEO
Hollow Form Vase Turning & Woodcut Tools - Phil Irons
51:00
Woodcut-Tools
Рет қаралды 8 М.
Richard Raffan on back-hollowing into endgrain
14:21
Richard Raffan
Рет қаралды 81 М.
Ozoda - Alamlar (Official Video 2023)
6:22
Ozoda Official
Рет қаралды 10 МЛН
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН
Woodturning: Hollowform with Woodcut Pro-Forme tools
13:05
formgjort by Jonas Als
Рет қаралды 7 М.
Hollowing With Woodcut ProForme
47:50
Colwin Way
Рет қаралды 9 М.
Pro-Forme Flexi Hollower and Irons Tool Gate - First Look
19:59
David Peters
Рет қаралды 11 М.
Woodturning - Roughing out Hollow Forms
16:49
Frank Didomizio
Рет қаралды 970
Die Auferstehung Der Walnuss - Die XXL Vase!
10:15
Kunsthandwerk-Benner
Рет қаралды 66 М.
Coring Bowl Blanks with the McNaughton Center Saver System
19:29
wortheffort
Рет қаралды 128 М.
Tool Spotlight - Woodcut Tools Pro Forme Flexi
7:20
Woodturning Tool Store
Рет қаралды 1,5 М.
Steve Jones Demonstrating the Skew Chisel
12:36
woodturner21
Рет қаралды 199 М.
Woodturning: First look at the Elbo II Hollowing Tool
24:41
Scotts Mini Woodshop
Рет қаралды 6 М.