Holmes Hobbies 2100kv Punchy 1/8 motor

This motor is called the punchy because it is!!!!! Very impressive!!! Its good to 6s but jeeze I just cant see it needing more!!!! Links below for this Holmes motor and all the Vitavon 7075 alloy parts!! Use them to support Exocaged RC.
Holmes Hobbies Punchy 2100kv 1/8 motor
holmeshobbies....
Traxxas Maxx
Amain bit.ly/2K4y6nu
Amazon amzn.to/3lIAzCs
Ebay ebay.us/fqMyg9
Wide Kit
Amain bit.ly/3i8C9Mm (white)
Amazon amzn.to/3rfW8LZ (red)
Ebay ebay.us/BUWfen (red)
Steel CVD's
Amain bit.ly/3sgdlGh
Amazon amzn.to/3cfKBIl
Ebay ebay.us/nTskqj
Sledgehammer Tires
Amazon amzn.to/3d0g3cz (stock axles only)
Ebay ebay.us/nwAEs9 (stock axles only)
Castle Monster X ESC
Amain bit.ly/2Yids6B
Amazon amzn.to/3cXSPnG
Ebay ebay.us/aoMhkP
REEFS RAW500 Servo
Amain bit.ly/2Qk4pi0
Amazon amzn.to/3rgZgr5
Ebay ebay.us/nNCII6
Vitavon Stuff below
Front Bulkhead ebay.us/767Z5U
Rear Bulkhead ebay.us/5UtLiz
Bellcrank ebay.us/Ufif2C
Rear Hubs ebay.us/mUqoLT
Servo Adapter ebay.us/eBO59x
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

[@onemansvideos2134]

Them tires were holding on for dear life

[@redvikinghobbies]

Motor runs great. Looks like a release swap. Great catch on that flip. That WAS awesome!

[@jasondionne1214]

No zoom needed 😂 damn that was awesome. I agree completely

[@jdpaslRC]

Perfect landing, no zoom needed!

[@GreatLakesRC]

The VitaMaxx looks strong with that motor 💪

[@christopherrice1375]

Love your videos. Very entertaining and informative. Keep them coming. Thanks!

[@teamsargentrc6399]

Holmes Power! Yah boy... 🤜🤛👊👍

[@BatmanRc]

I like your vidéo and i have a maxx From France 🇫🇷

[@ma-t6949]

Been wanting to get the smooth and the punchy for two different builds now but have been holding off for some reason. Thanks for the review buddy

[@ExocagedRC]

I may get the smooth next. For some reason I want to repower the LMT again.

[@just_inolredneck8319]

That’s definitely a great looking motor and definitely packs a punch! And I think u have got me wanting a xmaxx.... 🤦‍♂️ 4 crawlers a street stock race car and waiting on the losi drag car... idk if I need any else lol I do like the automatic flip over thing. Arrma needs to look into that! Saves u a long walk lol I thought u was about to jump It into the dumpsters lol great video!

[@jakethole]

More of that!

[@markvasseur961]

Nice and definitely punchy!

[@CoachD386]

Wow that’s moving nice 💪🏾💯

[@johnboy6955]

Have you changed the servo in your maxx yet if so what kind did you put in it? I’m looking for a fast high torque metal gear servo and I’m not sure what would be the best.

[@shadow7796]

I like it.

[@smallscalemotoring]

How do you think this motor would do in your LMT?

[@rc-daily]

I got my 6 shooter in the mail today

[@joepatcity8320]

Run 6s with lower gearing and it will run cooler because you won't be pulling so many amps you'll keep the same speed but your esc and motor will be so much happier because it won't be getting so hot. Amps = heat.

[@curtishubbard907]

What is a good gear up on the stock system man great video

[@BhutJolokias]

Wonder if it fits in the Ryft?

[@tkostang]

Not sure if you e taken one apart but the HH internals make my castle 1717 internals look like junk. Wish they made a “big block” version so I could drop one in my limitless.

[@beleg1437]

Any chance you'll try out the puller pro-l v2r 4100kv in your bomber one day?

[@johngantner9314]

are those the Hoss tires?

[@smoksta420]

What gearing did you use with the hobbywing? 24/46? And how was the temps? Having trouble gearing my max 8 combo atm stripped the 50t spur with a 20t pinion

[@GuyonaMoose]

I was about to buy this motor for my mt410, but I cranked a fire hydrant today and caused quite a bit of damage :(

[@KurNorock]

To the mt410 or to the fire hydrant? I've got the mt410 and I have yet to break it even though I routinely jump it 20+ feet in the air. The thing is a tank.

[@Cachapeluo]

Would these motors work for the Losi LMT? Is the KV2100 to low? On 4S

[@ExocagedRC]

it would work, I run a 2650kv in my LMT

[@kylecreek6735]

How do you guys think this would run in my ARRMA Outcast 6s EXB? I’m looking at this motor over the Castle 1520, wanting to keep the stock ESC for now. Any input would be greatly appreciated, I’d be keeping stock gearing until I got a read of the temps, I do have fans and a heatsink though.

[@lylewilliams9599]

Do you think this motor would work well in a traxxas ud?

[@petervenema9628]

Wat is more recommand castle 1515 2200kv of the holmes hobbies punchy 2100kv for the Traxxas maxx regards the punch motor temp and smooth startup

[@ExocagedRC]

They all will run well. The Holmes and castle are sensored so they’ll be smoother.

[@petervenema9628]

@@ExocagedRC thans for your answer mate last question do you know if the holmes 2100kv is more punchy then the castle 1515 2200kv or are they similar in punch and performance

[@davew1285]

Is this as good as a castle 1515 or Tekin 4038?

[@KTMcaptain]

Datalog please. How many watts does it pull?

[@tomlucasrccrawlers9108]

Awesome run, driving and review. Love that motor. I ran the 4274S Smooth version for nearly 3 years now on my Killer Wasp TRX4. But I'm with you on the "no 6s" thing. It would tear my truck apart with that 1/6th size rotor. Hahaha. It's actually not a bad crawler motor...in fact...its really good. Awesome Torque-density, great start-up and really good run-time. With a fresh 2700mAh 3s at Pro-Line By The Fire it ran 3 hours driving continuously and completed 3 trail before going dead driving back to camp.... Here's a short review I did a couple of years ago. kzbin.info/www/bejne/fajEfYqjpapnesk

[@KTMcaptain]

It's a 1/8th motor. Per Holmes' own specs, 19.1x 41mm rotor, has a very similar size rotor to a standard Castle 1515 spec motor that is 19.1x39mm which I measured myself (the rotor is 44mm long but the magnets are only 39mm of it). It is worth noting that the size of the rotor isn't the only determining factor for torque. My 1515 spec motor pulls less current on the same voltage and is noticeably less powerful than my TP4040 motor, roughly the same specs.

[@tomlucasrccrawlers9108]

@@KTMcaptain Good to know. I'm going off of the conversations John and I have had through Facebook...and that the 4274S 1/8th motor has an oversized rotor very close to those in a typical 1/6th size motor.

[@KTMcaptain]

@@tomlucasrccrawlers9108 I guess it really depends on the 1/6th scale motors and applications you are specing from. . It's definitely in-between the 1515 and 1717 series castle motors, and I don't know the context of your conversation so I can't comment to that. . The 1717 is recommended for light 1/6th scale and 1/8th scale applications. The 1717 has a 3mm larger stator and 2mm longer rotor. . As far as performance 1/8th scale motors goes, the Holmes' motor is very similar specs from what I've found around. I would definitely have ran his if I knew his specs and ratings when I needed one. . I misread my spec sheet, my 1515 rotor magnets are 39.07 long not 39.7 (rounded to 40). My TP4040 rotor is 4.5mm longer.

[@tomlucasrccrawlers9108]

@@KTMcaptain thanks again. Good to know those specs. I have so many Puller Pro's of all sizes and kv along with Revolver's and other motors....way more motors than my boys(young adults)I have combined. That's probably pretty normal for hobbyist looking for the perfect motor.

[@KTMcaptain]

@@tomlucasrccrawlers9108 yeah, the puller pros are really nice. When Holmes puts out their silenced speed controller I plan on getting a revolver.

[@massourc2908]

I think you should put a motor fan

[@Nevio_Cascione]

First

[@capracoins4317]

First view