HH 12t Crawl Master 550 series seems like the sweet spot. Great motors, consistent torq and low speed control.
@jimmyrioux91453 жыл бұрын
Nice job love your comparisons , true and clear ! I recently put a crawlmaster sport 550 10t in my gen8 , lost a tiny bit of wheel speed vs stock but gain lots of torque and speed control . Very happy with it ! Thanks to guys like you that help us make the right decision for our needs by putting it in motion ! 👍
@johnroddy9314 жыл бұрын
So cool you do all these motor test glad to see the Chanel taking off like I always thought it should been here since the 2000 props bud some day Maybe I’ll have the time to start one my self
@ExocagedRC4 жыл бұрын
John Roddy thank you and yeah if you know tech and can share, there are many that want to learn it. It takes a while to actually make a few bucks at it.
@76fordjunky4 жыл бұрын
I have the 15t in my bronco and 12t in my sport, love these motors
@rey34683 жыл бұрын
Which one do you like better for crawling the 15t or the 12t?
@frankblue68284 жыл бұрын
Insightful I'm looking at my first Homes Hobby motor. This is a good start for home work
@Houleigan4 жыл бұрын
Very nice comparison video! Keep up the great work!
@MrPROGAMER562 ай бұрын
I just installed my 15 turn today and I completely happy with it it also seems to be quiter then the stock motor
@BlytheToMeetYou4 жыл бұрын
I’ve been waiting for this video! My trail master is still running well but I’m about to order me a crawl master soon 🤘🏽
@ExocagedRC4 жыл бұрын
TAC0MA if you still want some wheelspeed get the 12t.
@BlytheToMeetYou4 жыл бұрын
Exocaged RC will do, thanks boss! 🙏🏽
@paulclancy24044 жыл бұрын
@@ExocagedRC hey I was going order one these 12t for my gen8 but how about the capra rtr, should I stick with higher turn motor
@ExocagedRC4 жыл бұрын
Paul Clancy I like the 13t Crawlmaster sport 540 but the 16t is good too, just a little slower. A 550 size motor is not a bolt in.
@paulclancy24044 жыл бұрын
@@ExocagedRC thanks ik, I watched you modify for 550 .was good idea maybe for me too since I cheated buying the r.t.r lol
@NikkiNexo7774 жыл бұрын
I just got my 12T in the mail 2 days ago for my trx4 sport. Looking forward to running this motor with a HW 1080
@tyleryoung8404 жыл бұрын
Bryan Forth I’m looking into the same setup either 12t or 21t how you like the 12t vs the stock 21t??
@NikkiNexo7774 жыл бұрын
@@tyleryoung840 12T is smoother at start up and has more torque. If I had to choose one over the other, I would go with the 12T
@tyleryoung8404 жыл бұрын
Bryan Forth what about top speed how’s that compare between the two?
@NikkiNexo7774 жыл бұрын
@@tyleryoung840 the Holmes hobby 12T is faster. kzbin.info/www/bejne/baDTdImlh5acidk
@NikkiNexo7774 жыл бұрын
@@tyleryoung840 I have my truck geared 45 / 9
@caroltremblay31234 жыл бұрын
Nice video, would like to see the same test between the 12t crawlmaster and the 27t trail master
@Tech-NO-City4 жыл бұрын
There both excellent the crawlmaster 5 slot has better low speed control wile the trailmaster 3 slot has a better drag brake.
@araibichedi86523 ай бұрын
when u tested the speed u did it twice for each motor first gear and second gear what is that pls ? what is the difference ??
@tollcollector1644 жыл бұрын
The brushed beast. I tried a 9T pinion and 45T spur in my TRX4 even on 3S is too slow, but the torque is AMAZING!
@hardcoretam4 жыл бұрын
I tried this before in my TRX4 but I found the stock motor was much more powerful with more torque
@Ennis094 жыл бұрын
I have the 12T in my sport with the hobbywing 1080. I swapped the stock 17T and 39T setup with a 12t and 45t, it makes it 5x smoother. If I run the stock 17 and 39, it doesn’t quite have the smooth low end. What gearing are you runnning?
@ExocagedRC4 жыл бұрын
Chris Ennis 11/45 in this one and yeah the 17/39 is more of a basher trail setup.
@Ennis094 жыл бұрын
Exocaged RC Wow, for some reason I think I’m only getting 7mph out of my 12t with 12/45! On 3s, yours is better! LOL, love your videos man.
@jonathanmcmahon22144 жыл бұрын
Great video! I'd really like to see a comparison between the HH crawlmaster sport and pro 12t. Is it really worth the extra money? After using a 5-slot I doubt I'll ever go back to brushless in a crawler.
@ExocagedRC4 жыл бұрын
Jon Carpenter interesting, I don’t have the Crawlmaster pro 12t anymore. I have the 10t but I can tell you from past tests the pro has a LOT more torque and control both on the crawl up and on descents. The magnets on the pro are just way stronger.
@klampfinger4 жыл бұрын
Hi Jon. Your comment Sounds interesting. Which brushless system have you been using? I am pending between a Quicrun 1080 with 5-slot motor vs the Hobbywing Axe brushless System. Not sure whether the Axe is worth the money...
@ExocagedRC4 жыл бұрын
klampfinger you can get great runtime, durability and control out of the 1080 esc with any decent motor. The Axe is in a whole different league, it’s control up and down are second to none and it’s a very good system, some can say it’s the best on the market. The Axe cost more but then again it’s a lot more of everything.
@jonathanmcmahon22144 жыл бұрын
@@klampfinger klampfinger I have a mambax crawler combo with a 3800kv motor. It's a great setup for my bomber. For a dedicated crawler I don't need the speed and the low end control of a 5-slot motor is just amazing. The quicrun 1080 is an excellent esc too. That's what I'm using. I also dropped to a 9t pinion. My truck is a heavy trx-4 (lots of brass) and when I do need some wheel speed 2nd gear always seems to have plenty.
@klampfinger4 жыл бұрын
@@ExocagedRC Thanks a lot for your advice. I always enjoy you videos.
@ConditionZero764 жыл бұрын
Nice video comparison, that 15 turn is grueling slow. if I bought this in the 12T for an 10.8 lb Scoutt ii Gen 8 what pinion would you recommend? Im currently running the stock set up I believe is 17 T pinion? Thanks man
@ExocagedRC4 жыл бұрын
yeah the 12t Crawlmaster works out well in that
@hinnmanfamily4 жыл бұрын
How about a video where you compare these, the stock motor, and the trailmaster all geared to run about the same speed?
@ExocagedRC4 жыл бұрын
I've done videos comparing the stock titan to the holmes trailmaster sport 21t, it was an easy victory for the trailmaster. I haven't done any comparisons against the crawlmaster motors because they are slower and just built differently. I have an almost new titan 21t I could run against the 12t if you think that would be interesting.
@hinnmanfamily4 жыл бұрын
@@ExocagedRC That would be interesting if they're geared for similar speed.
@royomtb4 жыл бұрын
@@ExocagedRC will be good to at least know the speeds with the stock titan to comparison..
@ExocagedRC4 жыл бұрын
Gustavo Royo Ribeiro the stock titan is faster than both of these.
@royomtb4 жыл бұрын
@@ExocagedRC I looked at your vídeo of titan x trailmaster 12t.. titan 21t with 2s is Just a little faster than crawlmaster 15t with 3s. But minimal difference. But with crawlmaster you have much more control at low speeds. Thanks for the vídeos with the infos.
@ConditionZero764 жыл бұрын
So you prefer the Trailmaster or Crawlmaster motors? I have Redcat gen 8 & trying to decide but also dont want to lose drag braking ability? a Thnx
@ExocagedRC4 жыл бұрын
Both are really good. Is probably go with the 12t Crawlmaster Sport but you can’t go wrong with the 21t Trailmaster Sport either.
@ConditionZero764 жыл бұрын
@@ExocagedRC Im sorry for all the questions but I cant seem to ever find the info I really need & Im new to crawlers. Is it normal for my Redcat gen 8 wheels to bind so bad when turning. Im running a flyskygt3b radio I adjusted my end points but in order to not get binding youd have have a massive circle turning radius. is there something else to help this or is binding normal with these since there 4x4 locked? Thank you so much sorry for driving you crazy!!
@ExocagedRC4 жыл бұрын
HKGuy Snowman#1 binding is kinda something that happens. If it’s really really bad then try to oil the CVD’s in the front end. It may help a bit.
@ConditionZero764 жыл бұрын
@@ExocagedRC Awesome Thanks for the info, I was starting to think something was wrong with it!! dont get me wrong tho its not like the wheels wont move or are jumping a 1/4 inch or something but at full turn it starts to kinda bind with some vibrating, Im just not use to it, I generally run 2wd brushless SC vehicles.. I'll take your advise & oil them up some, why I didn't think 🤔 of that is beyond me lol.. Now Im deciding between 21T Trailmaster or the 12T crawlmaster, Im worried the 12T will be to slow & Ive heard you lose your drag brake w/ 5 slot... Thank you very much
@dawsonbossi6894 жыл бұрын
Trying to decide what motor to put into my wraith. I am going with the HW 1080 and was thinking about the HH crawlmaster sport 16t. Not looking for much speed but a little punch to it. Any ideas?
@ExocagedRC4 жыл бұрын
If you can afford it go with a torquemaster. That’s a big truck that in all honesty needs brushless power.
@tgjaedan4 жыл бұрын
Not sure if you check these older vids but a question on these motors. Just getting into the hobby (built a TRX4 chassis kit) and some of the basics seem to not always apply. Stock comes with that 550 21T motor and what I've read basically is high turn = high torque and low turn = more speed. But here you are running a 12t motor that is slower than the stock 21t motor on the 3s...why is that?
@ExocagedRC4 жыл бұрын
The Crawlmaster motors have 5 slots on the armature. The other motors have 3 slots. Basically a 5 slot is slower than a 3slot and with that you can run lower turns and still have a smoother crawling motor.
@tgjaedan4 жыл бұрын
@@ExocagedRC awesome, thanks man. sometimes there's so much information out there it's actually hard to figure out the answer. Do you by chance have any videos on the TRX4 axles? The one odd issue I can't figure out is at full turn lock the axles seem to bind or something. I get a very jerky forward motion. and I have read people say everything from its normal to my drive shafts are a little too long and you need to grind off half a millimeter. I'm not a big fan of grinding stuff off if not necessary.
@ExocagedRC4 жыл бұрын
Spiffy_McAwesome it’s normal. At full turn the tires speed up and slow down twice per revolution. If you drive it slow enough you can see the tire do this. The trick it to only steer as much as you need and to try to never go full throttle at full lock. Most of the time they survive fine and most don’t even notice when driving.
@tgjaedan4 жыл бұрын
@@ExocagedRC thanks for taking the time to reply!
@tgjaedan4 жыл бұрын
@@ExocagedRC there aren't a whole lot of places for me to break the thing here in Northwest Florida so I'm trying not to break it because I put it together wrong first.
@benfred84 жыл бұрын
Question? Any manual shift mods for a 2 speed upgrade. No servo or 3 channel transmitter. Any thoughts or links? Hey bud. Just replaced the Titan with a 16t cralwmaster sport 540. Also was able to replace my one speed with the 2 speed transmission.
@ExocagedRC4 жыл бұрын
Maybe you could get a rubber band on it and just move that to one side or the other and shift it that way? I haven’t tried that on a trx but it works on an axial 10.3
@benfred84 жыл бұрын
Thanks for the idea. Just recently put on a key chain retractor for a winch. So far hasn’t been able to make the difference but.
@lowbudgetrc3524 жыл бұрын
Hey Joe, great comparison video! What pinion are you running in that rig? What differences are you feeling with these motors vs the equivalent turn Trailmaster sport? I run a Trailmaster sport 27t with 9t pinion in mine and really like how it does. Have been interested in a crawlmaster sport since they came out tho.
@ExocagedRC4 жыл бұрын
Low Budget RC stock 11t pinion. The “older” 3 slot motors have more low end torque according to Holmes, also the 3slot have a higher effective KV than the 5 slot ones do. The 5 slot are smoother but both are smooth enough I can’t really tell which ones are better.
@jeremybaity70024 жыл бұрын
Morning, what esc you running in your trx4 sport-ish? HW1080?
@ExocagedRC4 жыл бұрын
Jeremy Baity that’s a 1080 in there.
@jeremybaity70024 жыл бұрын
@@ExocagedRC I need to give the 12t a try. The 15t I picked up just didn't have the speed I was looking for so I went with a 540 27t HH trailmaster. I'm ordering the 12t 550 when I get back from physical therapy dang it. Thanks a million
@braydenhall18354 жыл бұрын
Do you think a crawl master sport 540 20t motor would be good for a Capra with stock gearing?
@ExocagedRC4 жыл бұрын
Melissa Hall no, that’s way way too slow. Now if all you want to do is crawl and don’t need any wheelspeed then I guess so. Personally I’d go with a 16t or even the 13t if you want a bit more wheel speed.
@RuudK.4 жыл бұрын
Would have lovend a comparison between the Trailmaster 21T and the 12T Crawlmaster. I bought the TM21T on purpose, since the original one is also a 21T motor. I am very happy with it but a comparison with this CM12T could actually show others if a CM is a step up. Any chance on that?
@ExocagedRC4 жыл бұрын
Ruud Kuijer yeah I can do that in the end the TM will give a slight bit more start torque over the CM. The CM will have a slightly smoother start up and both will have about the same speed.
@airsoftoutback31744 жыл бұрын
Is there any way to paint a body on the outside and have it work
@hinnmanfamily4 жыл бұрын
Sure, but be careful using the body because there is nothing to protect the paint. Some people use plasti-dip as the paint for this so they can peel it off and repaint when they want (I'll do this for just the fender flares on crawler bodies).
@addiemonsterrc39904 жыл бұрын
Use lexan paint on the outside, it is the same plastic as the inside. If you want to use non-lexan paint (as it offers more color choices) make a base coat of lexan paint or lexan clear on the outside first. You can then use regular paint on top of the lexan paint layer, and it will hold pretty well. I do this all the time.
@ExocagedRC4 жыл бұрын
Yeah and I’ve had an idea for a while. Paint the underside silver. Then paint the outside a nice opposing color of your choice. As it gets scratches they will be shiny when they are done but just paint those new scratches a rust color. That would give legit battle scars for the truck.
@airsoftoutback31744 жыл бұрын
Ok thanks! I have a beat bronco body I want to custom paint to look like my real bronco so this will be cool!
@hinnmanfamily4 жыл бұрын
@@addiemonsterrc3990 that's interesting. A friend accidentally used enamel paint once and it seemed to stick fine but wasn't flexible enough and flaked away at the places the body flexed, or so I thought until reading your response. Maybe the problem was that it didn't adhere well enough to deal with the flexing instead.
@klampfinger4 жыл бұрын
Hi. Thank you for that video. Do you use stock bronco pinion gear? I own the Bronco as well and want to put the sport body on it. What do i have to consider? Can i use the original fenders? Regards
@ExocagedRC4 жыл бұрын
klampfinger yeah stock 11t pinion and I had to trim the bronco inner fenders down quite a bit but they are in there.
@klampfinger4 жыл бұрын
@@ExocagedRC Again, thanks a lot...
@EHolm4 жыл бұрын
@@klampfinger traxxas has a narrow fender kit. Cheap, and looks better than just cutting the standard ones.
@klampfinger4 жыл бұрын
@@EHolmThank you. I will biy them. Regards...
@hinnmanfamily4 жыл бұрын
@@klampfinger trx#8080 fit.
@patrickwalker8624 жыл бұрын
How would you compare the 12t crawlmaster sport with the 21t trailmaster sport?
@ExocagedRC4 жыл бұрын
12t is smoother 21t has more low end torque
@bacharachcx5mazda8714 жыл бұрын
I am considering for new SCX10ⅲ。which one is better 12T or 15T. The high-low gear ratio of SCX10ⅲ seems to be different from TRX4 ...
@jakedavid81874 жыл бұрын
Do you use that hobbywing 1080 with these motors with the 3s?
@sprather844 жыл бұрын
Whats the best budget motor($50-$60) for crawling im gonna run the hobbywing 1080 i would appreciate the advice thanks
@rcaddict76383 жыл бұрын
Go crawl master I would say I’m not an expert though
@sprather843 жыл бұрын
@@rcaddict7638 already went brushless running a sw4 and revolver
@rcaddict76383 жыл бұрын
@@sprather84 oh nice how does it do?
@sprather843 жыл бұрын
@@rcaddict7638 absolutely incredible you need to try it out
@nathencosgrove8774 жыл бұрын
What would u say the difference is in the trail master and the crawl master?
@Loafina7or4 жыл бұрын
New section needs a rock booty
@johnanthony48564 жыл бұрын
I think 15t is for 8x8 or 6x6 heavy rig
@TheEgb18c4 жыл бұрын
Can this 12t be used in a monster truck and achieve faster speeds ?
@ExocagedRC4 жыл бұрын
Gerardo Ortiz I doubt it, it’s about the same as a 21t normal motor. You’ll be better off with a 12t Trailmaster Sport but watch the temps if you get that one.
@TheEgb18c4 жыл бұрын
Exocaged RC So the 12 T Trailmaster sport is the equivalent to a Traxxas 12 T in say a rustler
@ExocagedRC4 жыл бұрын
Gerardo Ortiz a little bit better but it’s close.
@TheEgb18c4 жыл бұрын
Exocaged RC better quality and maybe just as fast
@randyyoung50284 жыл бұрын
What transmitter are you using?
@ExocagedRC4 жыл бұрын
in this truck i'm using the stock one
@luisfernandezgomez61533 жыл бұрын
What is your opinion for Crawlmaster Sport 10T? Thanks in advance
@luisfernandezgomez61533 жыл бұрын
I mean, Crawlmaster sport 10T (5slots) could get more torque than Trailmaster 21T (3slots)?
@tomandrews53924 жыл бұрын
HH makes great motors what are you using for a ESC?
@ExocagedRC4 жыл бұрын
Tom Andrews this one has the Hobbywing 1080 esc
@mike2539053 жыл бұрын
Did you have to gear down on the 12t ? I know the Holmes hobbies site doesn’t recommend the 12t for crawling but it looked nice. I just don’t wanna get it and burn it out
@ExocagedRC3 жыл бұрын
these are the crawlmaster motors, a 12t 5-lot like this is about the same as a 21t normal 3-slot motor, he has them down to 8t and they work great
@mike2539053 жыл бұрын
Nice thanks for tip
@toddeaves30154 жыл бұрын
I have a redcat gen 7 sport and I was wondering wat weight shock oil u suggest I use. And Wondering wat c rating on a 2s lipo I should use thanks
@ExocagedRC4 жыл бұрын
What weight shock oil I use is the stock, I haven’t felt a need to change it. On the lipo, it’s a low amp crawler so there is no need for a big c rating. Mah is more important. No battery is over 30c no matter what is on the label
@toddeaves30154 жыл бұрын
@@ExocagedRC ok thanks alot.
@JDHitchman4 жыл бұрын
What size pinion?
@BudgetRC_Channel4 жыл бұрын
I have the 15t on a 1080 in my Enduro kit. Beautiful combo, but too slow. I'll be ordering a 12t soon.
@ExocagedRC4 жыл бұрын
I was a bit surprised at the speed difference 3 turns can make
@BudgetRC_Channel4 жыл бұрын
@@ExocagedRC me too! I didn't expect that much difference until I saw your comparison.
@modelnutty65034 жыл бұрын
1-2 tooth larger pinion is an option to change it too
@BudgetRC_Channel4 жыл бұрын
@@modelnutty6503 I don't like to gear up because it kills the low speed startup and torque
@OswaldBeef4 жыл бұрын
@@BudgetRC_Channel it might not kill it if its considered too slow already. I think the 15 turn with a 14tooth might be worth trying, I'm going to. Edit* on a trx4 2 gear
@jaylatham41084 жыл бұрын
12t with a 1080 works great for me
@ExocagedRC4 жыл бұрын
Jay Latham yep! I may try a BRXL esc and 4S on the 15t just to see how it runs.
@AverageReviewsYT4 жыл бұрын
In a world of motors where u have enough torque to spin the tires in any situation lower your gearing to give it more pointless torque - every rc owner. Yeah i dont understand that idea