HOLSET H1C TURBO REBUILD

  Рет қаралды 14,080

ChucksCustoms

ChucksCustoms

Күн бұрын

Пікірлер: 27
@seangibson1221
@seangibson1221 4 жыл бұрын
That engine is gorgeous! Thanks for this video. I'm going to be rebuilding mine soon. Nice job!
@barnyardbuildz
@barnyardbuildz Жыл бұрын
Great video very well done
@michaelb268
@michaelb268 5 жыл бұрын
I really hope this KZbin thing works out so you can build an actual shop. The amount of stuff you have stuffed in that garage is impressive lol love the videos man, keep going!
@ChucksCustoms
@ChucksCustoms 5 жыл бұрын
I really appreciate that! It's taking some time, but I think if I try hard enough, and with enough support, I know I can get there 👍
@Silent.Stacker
@Silent.Stacker 5 жыл бұрын
Don’t have any plans to rebuild a turbo, but this was an enjoyable video nonetheless. Thank you. Keep making videos and I’ll keep watching.
@jordanray7385
@jordanray7385 5 жыл бұрын
Love the channel man. Been here since a few. Hope this channel gets more love. Cheers.
@ChucksCustoms
@ChucksCustoms 5 жыл бұрын
Thank you for the support! I really appreciate it! The channel has grown a lot more than I expected over this last year, so I'm excited to see what this next year has instore!
@jesustrevizo3148
@jesustrevizo3148 5 жыл бұрын
Looking forward next vid 👍
@justinearle9236
@justinearle9236 6 ай бұрын
I’m having the same issue with that oil flinger but the problem is I’m using the old one and the new one and both are locking up the turbine and compressor wheel idk if it’s because it’s not balanced but I don’t believe that is the issue and I’m a little lost lol I hoped that using the old flinger would work but sadly it has not changed anything
@freebird7284
@freebird7284 4 жыл бұрын
nice intro, channel is looking polished, good tips on the china made turbo kit, keep it up
@ChucksCustoms
@ChucksCustoms 4 жыл бұрын
Thanks! Will do!
@dupuismodz4557
@dupuismodz4557 5 жыл бұрын
Hey can you do a video about the driveline like transmission and rear end I'm putting a 12v in a 72 k20 so I have 4wd to work around and I'm still considering what to do for a trans I have a motor and a 47re but it won't hold up for what I'm doing.
@ChucksCustoms
@ChucksCustoms 5 жыл бұрын
I would love to! But considering that Bessie is completely experimental to me, I'm not really sure what to suggest, especially for a 4x4 application. I'll gladly make the video about what my current setup is, but is there anything in specific you'd like to see me talk about or maybe try (within financial reason lol)?
@dupuismodz4557
@dupuismodz4557 5 жыл бұрын
@@ChucksCustoms some specific things are like what's the transmission and how it shifts going down the road how many speed and like how you setup you drive shafts if you cut and welded them yourself or sent them to a shop.
@Bore_Punch
@Bore_Punch 5 жыл бұрын
My buddy has 2 k10 rollers. One of them he is putting a ls/4l60 into. I was gonna buy the other one and drop a 12v in it. Since the front diff is on the passenger side, according to him a 4l80 with whichever transfer case that came in them will bolt right up. You would just need a controller and adapter plate
@cw6371
@cw6371 5 жыл бұрын
I totally didn't know you had to mark balance on turbo parts....... I don't have anything with a turbo, but I might eventually.
@josephprohaska7755
@josephprohaska7755 3 жыл бұрын
Most holset parts are individually balanced if I’m correct so there’s no need to mark it or at least to my understanding.
@Adamz678
@Adamz678 Жыл бұрын
I'm pretty sure that's correct. Doesn't hurt to mark it anyways just in case.
@jesserasso1042
@jesserasso1042 3 жыл бұрын
I'm pretty sure your aware those 12ers love the hx35 hy35 and hx40 you'll get alot more air just a suggestion
@stevensranch1135
@stevensranch1135 3 жыл бұрын
I have one on my truck but not sure what size mm it is could ya tell me?
@truckcampertraveler7369
@truckcampertraveler7369 5 жыл бұрын
👍🏼👍🏼👍🏼👍🏼👍🏼
@danieljohnson4153
@danieljohnson4153 4 жыл бұрын
Do you happen to have your old oil pan?
@ChucksCustoms
@ChucksCustoms 4 жыл бұрын
Unfortunately I ended up scrapping it when I moved. They're not too expensive on rock auto though
@BolteBuilt
@BolteBuilt 5 жыл бұрын
You can machine your H1c to an HX35.
@jameshoneyc
@jameshoneyc 3 жыл бұрын
I've got kits that weren't correct.
@alfredlearlyjr1780
@alfredlearlyjr1780 5 жыл бұрын
Your corret to be truthful about the turbo rebuiild kit.
@ChucksCustoms
@ChucksCustoms 5 жыл бұрын
The moment I lie, is the moment I destroy my credibility. I will never recommend a bad product, and I will always be sure to warn people about a bad product 👍
Why the Holset HX35 is the BEST budget turbo!
9:12
Boost Brothers Garage
Рет қаралды 99 М.
Genuine Holset® Reman™ Turbochargers
2:41
Cummins
Рет қаралды 28 М.
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 16 МЛН
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 162 МЛН
ЛУЧШИЙ ФОКУС + секрет! #shorts
00:12
Роман Magic
Рет қаралды 7 МЛН
H1C Turbo Tear-Down
18:02
Gillett Diesel Service
Рет қаралды 6 М.
How to Rebuild a Turbocharger (HX35/HX40)
11:47
MillerWorkz Ltd.
Рет қаралды 7 М.
NV4500 SWAP Part 1
20:58
ChucksCustoms
Рет қаралды 28 М.
SQUAREBODY FRAME SWAP (part 1)
15:35
ChucksCustoms
Рет қаралды 3,5 М.
Holset H1C H1E turbo upgrade options
9:24
Turbo Lab America
Рет қаралды 30 М.
H1c vs hx35
5:26
CUTTERUP ROB
Рет қаралды 8 М.
BESSIE FINALLY GETS SOME BODYWORK
16:32
ChucksCustoms
Рет қаралды 4,7 М.
He351ve inspection before rebuild
11:06
Turbo Lab America
Рет қаралды 8 М.
NV4500 SWAP Part 2
21:46
ChucksCustoms
Рет қаралды 41 М.
Holset H1E H1C Turbo Rebuild
6:09
Turbo Lab America
Рет қаралды 26 М.
BMW OR MERSEDES?☠️😈
0:13
Kan Andrey
Рет қаралды 6 МЛН
BMW M3 😈 vs Toyota Supra Mk4 ☠️ It's a Trap! 💀
0:11
DP Cars Arena
Рет қаралды 1 МЛН
thật đơn giản
0:36
Điện Máy Quốc Doanh
Рет қаралды 9 МЛН