Holy compression! WILL IT RUN?!? Junkyard ((1973 DATSUN 1600.))

[@willt644]

Box Truck Mafia needs to be a Tshirt

[@PuddinsFabShop]

I’m always planting seeds around her 🌱🌱🌱

[@michaellemons5143]

Hell yeah I would get one for me and both my sons

[@michaellemons5143]

But we got to wait till both trucks are done so he can put the pic of both of them on the back

[@glennnickerson8438]

Print up those shirts up on wrinkled t shirts to match the waves on the 1600!

[@garfixit]

Thank you for the great videos👋

[@fuelinjectedduck2964]

Gotta be one of the most consistent content creators out there. Really appreciate the work you put into these videos, no matter what your doing.

[@larspederson1451]

He is consistently better and better! Go back and watch from 3yrs ago videos. He come a long way from a part time KZbinr to full time awesomeness. Hot damn!

[@fuelinjectedduck2964]

@@larspederson1451 oh yeah. You can tell he was holding back his personality in the older videos.

[@nickh4539]

The flow of fabrication, will it runs, and project updates is impressive. Puddin’s no one-trick pony that’s for sure!!

[@bretthollingsworth2818]

fur shur !

[@jammie129]

Hed got the knack for gettin shit going for sure, which is entertaining.

[@1973gasman]

Puddin, I'd watch ya paint a fence buddy. I know you said "this ain't a good video" but any video you put out makes my week better. Keep at her bud, we appreciate you!

[@suzyb3708]

totally !!

[@stubbysgarage]

That truck needs to be called General Yee. Being the orange color of General Lee and Yee for all the YeeHauls

[@jcnpresser]

Been waiting all week for this. Hot damn it’s time for another one. Ole puddin has become my favorite KZbinr I think. Cars and laughs, don’t get much better than that.

[@beardedscrapper538]

Agreed. He never disappoints.

[@haroldrogers6083]

Her name went from whisky dent to “Oh Hell She Bent” , but she still going to be a runner !

[@jaycallahan9696]

Best part of my Monday is watching a new PFS video, thank for all you do, and helping me get off my ass to get my projects done!

[@polatroyed8677]

Send it on the rust repair, we'll all watch it!! We're here regardless of what your doin!! Floor pans n sills are a standard repair everyone needs to do at some point, looking forward to seeing how you attack them!

[@OldsmobileCutlass1969Va]

I have some rust repair to do on a old truck bed. I'm just going to pop rivet some scrap sheet metal to fill the holes... A little caulk (seam sealer) and pain to finish it off.

[@baileysnyder2581]

My favorite youtube channel to date. It shows how much effort you put into these videos. Thank you for the endless laughs, and the mini truck content

[@chronicbluntz7267]

Love the videos! They are something to look forward to on mondays. Just a reminder, those mini truck carbs have a solenoid that requires power to allow fuel to idle circuit. This is to prevent dieseling when you shut it off. I belive it was the red wire in front of the carb. Consider leaving that one intact. Or not... 😆 Can't wait for another episode!

[@kimberlywilliams9757]

Your videos haven't disappointed me yet! I love them and I for one would like to see you divide the videos on the newest box truck project. I want to see all of the work you do on her. Looking forward to the next video, keep up the good work. 😊👍

[@indycollie6424]

620's are my Eleanor, I've owned 8. From blown headgasket to having kids, it just never worked out. The dream is a 620 with a y 40 out of a presidential. If ever I get another one I'm never letting it go.

[@kennethsonier1766]

Dude you are definitely the most interesting character on KZbin! Regardless of how simplistic the repair you make it interesting 👍☮️

[@chicagovasko]

Thank you Austin for donating a badass truck for us to enjoy puddins magic.

[@DeezLBC]

"Wasn't my best video" Puddin'..... I LIVE for these videos. It's great seeing something dead come back to life with just hand tools.

[@Smalls_Childress89]

Hot Damn It's Time For Another One!! 🤘🤘

[@chicagovasko]

YeeeeHaulll.

[@steveperyer4850]

Puddin, every episode is so entertaining, that I can’t understand why you aren’t on a major syndicated TV channel. I enjoy every time you put out new content. Always learning something, and get a few smiles and chuckles to boot! God Bless You and Your Family Buddy!

[@jdfmfb03]

NO. STAY AWAY FROM TV NO DISCOVERY MOTOR TREND OR VELOCITY Talk about LOUSY content stick to YT

[@SuperNoticer]

He'd have to have the box truck done in a week (1 hour episode) or he'd lose the shop!!!

[@dalehinson98]

TV would just ruin his show trying to add in B S drama that doesn't have anything to do with Pudding . Keep Pudding Free Stay Away From TV .lol

[@SuperNoticer]

@@dalehinson98 Yep tv is trash for NPC's

[@Butcherbuilt]

"Mama didn't raise no punk" why do i get the feeling that will be on a future shirt??? lol .... I'll take an XL!!!

[@wolfparty4234]

Puddin, it really doesn’t matter what your working on in the shop or even outside the shop. As long as your making video’s we are all here to see you and all the funny things you do!! It does give me great joy to hit that 👍🏻 button bc if you can’t tell, I’m smiling and laughing as I’m writing this right now😁🙏🏻❤️💪🏼💪🏼👍🏻🔥

[@jeaniepatterson2384]

My Dad would build or customize a tool for whatever he was working on. Loved the video. Ol Whiskey Dent will come around, I’m sure of it! Great video. Looking forward to the next one.

[@matthewf1979]

I really don’t care what you do. I just enjoy the hour or so I get to spend watching Ol’ Puddin tang on Monday evenings.

[@DanDan-yy8sf]

I'd listen to him read the phone book.

[@nancykitzinger3078]

I love those mini trucks! They take such a beating and keep right on going! Great job!

[@danbasta3677]

Wish they were still being built today instead of these ugly 4 door station wagon trucks out there these days.

[@Raymondablack832]

*"The best time to plant a tree was 20 years ago and the next best time is now"* I consider this to be best motivational quote I've heard in a very long time. But motivational quotes are useless if you don't practice what you preach*

[@globalpandemic8450]

You're right, that's why I invested into assets like cryptocurrency and some stocks

[@annabelkatherine6441]

Stocks are good to invest on, but crypto is more profitable

[@Johnclayton28]

Crypto is the new Gold

[@كاثي-ب9ظ]

I wanted to trade crypto but got discouraged by the fluctuations in price

[@roguefrederick]

@@كاثي-ب9ظ You have to get more experience first, work with a professional like Mr Dave Jevans on crypto to guide you step-by-step.

[@michaelcarmack4731]

Let’s see how long this vacuum lasts 😂

[@hepburn118]

They go very well with a Nissan 1.8 CA18DET motor shoved in them , fits easily too. A workmate here in Australia did it, made for very spirited motoring.

[@mrromantimothy]

a straight 6 out of a z-car fair lady would do the trick and stay bolt in as it would just add two identical cylinders as the four that are in the Datsun 510s and trucks , you could swap pistons and everything would be fine,you'd have to make some room in front for them though.

[@j.walker3498]

Since the dually has roof paperwork issues, make a good offroad recovery wrecker. Throw a front axle under it. Beadroll logo in new floor pans?

[@tstryker03]

I'd love to see one of these little Datsuns with a Ford 300 straight 6 in it, she'd be a power house with a 4 speed with granny low.

[@mrromantimothy]

that motor won the Baja 1000 three times, you can't argue with that,and the fact I've seen them on backup generators in just about every institution, wherever they're needed

[@ClassicMoparsbyEvtheDodgeMan]

Half the engine would be in the front seat, and you would have sit in the bed to shift it, and making a drive shaft would be quite a chore. it would e easer to put a small block v8 in it.

[@danielsimmons7397]

That wouldn't work, but a 2.3 lima turbo guy might be fun in a Datsun!

[@dude28405]

This video was just what I needed after a day of contemplating all the bad life choices I’ve made you’ve brought a few smiles to my face

[@davidgwin4540]

Peter, my brotha you said it better than I could have said. I hope your day goes better than the day before man.

[@dude28405]

@@davidgwin4540 Thank you very much my friend I’m where I need to be right now with puddin and his people.

[@rccrawlking]

Lets be honest the pressure washing scenes are the funniest🤣🤣 keep up the good work Puddin love the videos!🍻

[@fredfabris7187]

I typically fast forward when some dude video tapes washing his project (yawn). I must confess, I watch and laugh while Puddin does it😂

[@mikejackson8320]

Someone needs to send this man a boat tank already they work great for will it runs

[@fredfabris7187]

Or he needs to stop in to a few yard sales this summer and pick one up!😂

[@MortskeRepair]

Wet compression vs. dry compression my boy. Remember that quart of PB Blaster you put in each cylinder?

[@pkd4697]

I find myself looking forward to Mondays. . . Love your channel, entertainment is steller, and your fab is great, keep up the great content!

[@robertclubs9908]

Awesome show You're the Bob Ross of small pickup trucks

[@roxieloot]

Love the way you explain how things work in basic simple way, so that people who don't know how things work, can learn the basics. We all had to learn once. And points are not around like they was when I started out working on cars. Keep up the good work. Respect from UK🇬🇧

[@paulmurphy5964]

But don’t you get bored hearing the basics when he is capable of more entertaining commentary? I do.

[@MortskeRepair]

Fuel pumps aren't meant to pull, they're meant to push. Get the fuel level above the pump and it'll work better Hoss.

[@teamempressive7730]

Thanks for the weekly video Pudd I really love to see the old side draft carbs in action once again one day. 😁 thing got warmer up here in Jersey so is time to crack in our old Datsun project as well and put up some content soon. Keep up the good work as always

[@mohawk2185]

Lots pf turds at my job....... That vacuum couldn't get them all in one day like you do in the video...... Gotta buy stock in the company..... CLEETUS MACFARLANE AND YOU COLLAB...... HIS CIRCUS AND YOUR JOKES......POTENT COMBINATION FOR FABRICATION AND DESTRUCTION TO JOKES AND FUN .......

[@mlynch001]

I had a 1975 model just like that. My first new truck. Same color, everything. Love your content. You make us laugh non-stop. Keep up the good work. Love my Puddin’s Fab Shop trucker hat!

[@cowfrank]

We bought one too 1975 orange short bed . Traded in a 73 Chevy ¾ton 454 .

[@jasonclark2056]

I was powerwashing my "Towbalt" this weekend and suddenly felt the need to go get some bibs and start spraying in slo-mo. Luckily for my neighbors I resisted that urge.

[@K3NnY_G]

"I have a plan at 250k subscribers." ... I just assumed along this amazing ride Puddin' would've got as he deserved. This is so vastly superior to what so many others are doing, while doing all those things; just better, and havin' more fun.

[@mikebarnes8908]

RUSSELL PUDDIN CROWE! Good show my man! Ya got an old Datsun just as ancient as me! LOL! Damn funny you said... Got to find some WASHERS for these NUTS! LMFAO

[@Smalls_Childress89]

Why does every Pittsburgh jack sound exactly the same? It's the great sound of high quality

[@mcpuddin6106]

Right

[@That70sChannel]

Why does China Freight name all their brands after rust-belt cities that haven't manufactured anything in decades?

[@NickTheFelice]

Haha mine too. Greased the fitting too and no change!

[@elishmittywerminghanjensen1264]

This stuff is still entertaining as HECK there guy! Who cares if you don't think it's your best video ever? You still did a bang up job at editing, your cleaning montages, dance moves, that good ol' pot county fuel systems 👌 Cherry video if I do say so myself.

[@xxkillerkane420xx8]

Another awesome video! Those slo mo montages will never get old! I need Box Truck Mafia shirts for sure

[@donjohnson1416]

Anyone who will walk INTO your garage with a gas jug clamped to a broom stick leaning on your truck is a REAL TEAM MATE!!! lol.

[@bohawkins5258]

I’d be down to watch you do some sheet metal work on the Datsun!

[@grumpyoldman495]

Ok, I ordered some shirts and a coozy last Wednesday and I got them on Friday! I think them New Balance shoes must be working, cause you're kicking Amazons ass on getting them orders out! I forgot to mention two things.. First, thanks for the free Sticker, got a truck just waiting for that one. Second, I have to agree with every one about just how good the quality of the shirts are. Keep up the great work.

[@drewanderson8279]

Every monday after I get home from work my 3 year old son stands at the gate to the kitchen waiting for me to walk in the back door like I do every day from work. So on Monday's I say to him. Oh Damon guess what on tonight? He jumps up and down and says puddin puddin puddin!! My son is the bomb!!

[@anthonypiligno7618]

Keep Firing from the hip... I love the videos no matter what you put out it always puts a smile on my face thank you very much I will keep you and your family in my prayers....jonjon...JJ..

[@1forjohnny]

Your intro always make me giggle like an idiot. Keep up the great work on the “Datto’s” (pronounced ‘dat-oh’ the slang for old Datsuns in Australia)

[@kevincorbin6273]

Maybe maybe not your best but this is the second time down this road for me! Thanks for sharing your journey Puddin! I’m always in a better mood after watching your videos

[@Matts_Fab]

I would like a set of Puddin's Fab Shop Bibs. When will those be on the website? PLEASE!!!!

[@mrromantimothy]

just remember puddin, not putting a quart of Rislone in your oil, before you try to start any vehicle won't free up your sticky valves. lifters or rings

[@marcbeattie7799]

15:11 change her name to ohh shit! One of the funniest lines to date, was having a ehh day and that made me laugh out loud. Thanks keep doing what your doing man. From Australia 🇦🇺

[@mobseen69]

Perty syre those pumps aee gravity feed so they have to be well below the tank your pymping from. Thats why people mount em on the frame, (to stay primed) Could be wrong but i do t think i am

[@saberxzero]

I appreciate the simple explanation of the carbs. I dont know much about cars but would like to know some more so all car information i super appreaciated!

[@mitchellpuryear6898]

It's getting better and better i love this show

[@Jacob_Headley]

those pumps might be only gravity fed pusher pumps and not lift pumps. two different ones and the auto parts store usually sells pusher pumps.

[@SuperNoticer]

Matco Tools sweatshirt? Ya can't hide money! Ole boy's done moved on up.

[@victorrobinson9116]

Oh I see you got a new vacuum sucker upper kind of thing ! that looks darn near new ? 🤪🤑

[@eugenesbackyardrepair4593]

You've gotten probably 1000 pieces of shrink tube from fans so of course u use electrical tape on the ground wire. But if you doing it for laughs or just quicker videos u hit it on the head for sure

[@YetiYeti-ql4so]

As always another great and fun video by the one and only puddin. God bless you and your family.

[@robertmoreland1835]

Best part of Monday. Best channel on KZbin. Keep up the great work man.

[@tat2edtom]

Love the videos! My 8 year old daughter just watched a video last week and now she’s hooked!

[@bryantje9335]

41:14 Travis “Pastrami” Pastrana, I had to replay the clip several times it was too good

[@glen4130]

I'm so confused. Brake clean for carbs. Carb cleaner for spark plugs.....

[@mistresspirotessa9085]

Hanging that bottle of gas made it look like you had an IV plugged into it. :D

[@wgrillojr]

It's Puddin's pep rally!! Spreading spirit and psyching us up!!

[@Madmick82]

Datsuns in that condition will fetch around 10k here in Australia.

[@davidcotton7927]

Love your videos. You never cease to keep things rolling and interesting with your great sense of humor. You make one of the worst days of the week something to look forward to.

[@LOVEMCHUNCKY]

Classic mini truck. Yaahh good job 💪🏆🇺🇸

[@daramcmahon4040]

Yer some man! really enjoying your fresh content 👌 👏 😉

[@PatRMG]

Enjoyed it, Puddin

[@Shield.148]

That fuel bottle looks like you have an IV running into the motor!

[@nelnova]

I love this orange truck! Looking forward to seeing it again .

[@laynepalmer8690]

Love the content sir! I have a 620, and I’m just confused about the 1600 name for this one. I thought all bulletsides were 620, did someone stick a 1600 badge on this and call it that or was there actually a difference?

[@sinuje]

620 is nickname of the Frame series.... 1600 caused that engine is L16 1.6 lt there are another 620 with engine J15 with 1.5 lt and those said 1500 that's why... actually the previous frame series was call 520 if you see those are idem to the car 510 so, 510 for the car and 520 for pickup truck XD

[@catgirl8845]

It was a great video, thanks, I always enjoy watching!

[@jeffroderts879]

Love the Datsun truck And hello from Alabama come on

[@garymccord4277]

Switch cabs on those trucks use the best you have for your own keeper.

[@brucejr.5833]

Jam a new balance in the turn signal hole and it will be good to go!

[@lomni02]

that jack sounded like Psycho Shower Scene !!

[@lordcupkake]

I always look forward to these videos and watch every week. Thanks for the great content, this shit is the best

[@jayliel5454]

That's still pretty good compression though.

[@WieDrDerJonge]

No matter the content, you will entertain us anyhow!! Great video as always

[@sweettee3647]

Once it warmed up it started sticking the valves. I would say that would be a really good engine. Might need to go thru the head and new gaskets. But the smoke cleaned up after it ran a while. And it's quoter than any other engine. Love the vids

[@techtips1064]

I got a little too excited when I saw that engine. I had an old 510 with that motor. That's an ass kicking machine.

[@kevincorbin6273]

A screw ,bolt and a nail trifecta, hahaha! Classic!

[@kylew.4720]

Before I even watch this, I done got off my ass, and got all my projects finished. It took me a week to catch up on two weeks worth of puddin. Man what a motto!!

[@68hotrodrs]

Puddin pulled a David Lee Roth!!!! JUMP

[@RandBLSWorld]

Always enjoy your videos dude, no matter the outcome..

[@HFG]

I missed watching on Monday and life just didn't feel right! Back on track now 👊🏼

[@carlosfigueroa1705]

the bottle up on the stick looks like a hospital iv

[@robsolo7767]

Did you hear about the Yee Haul recall?????

[@richardbullock4665]

nahhhh Pudd, good show as usual...doin fine

[@powderhoundclips]

Puddin, i as well as a lot more would love to see you revamp the flatbed Toyota and make a custom Puddin-fied roof skin for it? Maybe toss a Datsun cab on it? Could be a pretty sweet way to show some of us less skilled folk how it’s done!

[@PuddinsFabShop]

No chance. Lol.

[@seanfarley1307]

No matter the content, we will watch! Very entertaining! Great channel, wish you all the luck!

[@blackdot3538]

Always a good watch. Thank you.

[@rayphillips332]

What ever you put out is good keep up the great work love watching.

[@ItsLumiVR]

Damn... I need neighbors like Puddin.