Holy Schnikies! the 2100cd is a RIPPER!

[@novicelumberjack]

I counted 58 pulls!

[@MrHangerone]

Hope you Arm is alright lol been there done that 🙂

[@MrHangerone]

Forgot to say great content love the video

[@lassila3]

I did 32 on my Partner 5000+ the other day 😜

[@jongreca5429]

I bet he does dumb shit on purpose for the views I bet he is playing dumb

[@EcSsAwS]

When you looked at the log then at the saw. And said holy shit I fucking died !!! 😆

[@novicelumberjack]

Awesome!

[@KainKustomGarage]

Good exercise for ya Son! My shoulder still hurts from mine! Thanks for the shoutout brother!👊👊

[@beeehusky7431]

Holy buckets man that old girl is wicked! Love it

[@novicelumberjack]

Yeah man! I almost got knocked right out of my boots!

[@rakersdownnz]

Good perseverance Mate, you just had the 2100 experience, good job fattening it up, you got it for another day now.

[@paulwalden7560]

I have to agree with Tim Vandevest. That saw popped off on the first pull after you primed it with fuel. May have over chocked it. This is a great example of what we all go threw with trying to start some of these saws. It happens to all of us. Take don't take it the wrong way Boedy. But I enjoyed watching this. This happens to me a lot. I could feel your pain. Some subscribers recommend pulling the governor on this saw. I have sold many of the 2100"s in my day. Mostly with 5 foot bars to loggers in my area . Mostly to cut White and Red Oak. Leave the governor in. This saw was designed to pull and work very hard. I must say I never really got many of them back with problems. One well built chain saw.

[@justinweaver8787]

Super nice. Saw sir the 2100 called big gun that kain kustom garage is buildn is for me im a timber faller in Tennessee an im so freakn excited!!

[@timvandervest5575]

I digress. Once you got her started the first time she fired right back up. Super awesome saw. That dry red oak is some tough cutting wood with low rakers.

[@novicelumberjack]

Pretty sure I flooded it early on.

[@JKSawShop]

I really like mine. You have to get it to compression and then pull for all its worth. Don’t do what I done on camera and forget to turn it on and pull a few times. The pins that hold the starter paws in sometimes like to back out, especially if you took the recoil off and just put it back on without pulling the rope to get the paws to swing out of the way.

[@dannymccay5859]

Awsome saw i love the 2100 .My father in law was a logger in the late 70s , and 80s . i heard tons of stories of him and that saw . i want one .

[@novicelumberjack]

I'll probably be selling this one soon.

[@dannymccay5859]

@@novicelumberjack let me know bud .

[@woofy548]

Wack off with 3120!

[@jwoods345]

Sweet saw! can't wait to see more of it. Love the old husqvarna and poulan saws. I hope the ol 5200 will put on a good show against it 👍

[@cobhc1986]

I’ve never run a 2100, but I do have a 285cd, which looks identical to the 2100 minus the manual oil pump. My 285 has so much compression that I always start it on the ground and don’t snatch the rope, I get the pawls engaged and then pull

[@Woodman_Custom_Sawing]

You shouldn't drop start that saw or you'll blow out the starter paws on that recoil. You should pull lightly until they engage the flywheel then pull. Also, use the throttle lock to set high idle.

[@loganpotts9623]

So painful to watch..

[@megaluckydog1212]

... and close your mouth while cutting, unless you need more fiber in your diet.

[@jokebaker22]

@@loganpotts9623 Probably why he didn’t name his channel The Well Seasoned Lumberjack

[@randybarnes6661]

When you got it right buddy that dam thang just started Nawing through that shit 👍👍👍👍👍

[@novicelumberjack]

Yeah, it was awesome!

[@larrywarner9314]

😂 That's a big man's saw they have lots of compression 😎

[@larrywarner9314]

You need to put a Welsh plug in the govern hole then tun that saw properly and it will surprise you 😁

[@Doc-Cole_Trickle-of-Chainsaws]

Nah, that's not a chainsaw, this is a Chainsaw! Big saw 4 a Big Guy 👍🆙

[@IowaPerformanceSaws]

The minute you hit the NOS button by turning in the high and she lit up- if we could have moments like that every day, we'd be a happier planet. What an awesome score.

[@novicelumberjack]

Yeah man, that's exactly what it was like...hitting NOS! I ain't got friends, I got family!

[@Sensei948]

@@novicelumberjack Perfectly adjusted, she growls like a female dog in heat :)

[@frankz1125]

Id like to see the cut comparison on that tree with the 3120 and that, You still have the 3120?

[@thelazyarborist]

Only saw that ever scared me was 090 and 2100 got a new to me 2100 and I freaking love it

[@timvandervest5575]

I love how your dog walked over to console you.

[@novicelumberjack]

He's a sweetie. I love that dog.

[@jokebaker22]

Can you recommend a 70+cc jonsered or husky saw with an inboard clutch and manual+auto oiler for milling? I was about to pull the trigger on a 2100cd but then I saw you trying to start this one hahaha

[@edwinladshow5791]

that impressive!!

[@justinweaver8107]

Did u port it or stock? Great runin saw.

[@richkramer2777]

it really helps when the bolts fall out of the muffler opens saw rihgt up

[@joe-ip3cf]

Hi, it looks like some liquid (gas) is leaking from the lower bottom corner between the handle and the main body, facing the camera.. When you were cutting is when I saw this. Thanks for showing it. It is a monster of a saw.

[@larrywarner9314]

Dude that prime firewood I wouldn't be just cutting cookies out of it

[@thehonestwoodcutterbradywe8011]

I agree,but how.often do you get a log that perfect set up like that to test big saws on?

[@Revellersaws]

I have a spot in my garage we can put that saw, and it will never hurt your shoulder again

[@Revellersaws]

Was it too lean or rich when you first cut?

[@novicelumberjack]

Too rich. I kept expecting that the 3/4 turn on the hi jet was too lean because the previous owner didn't understand the governed carburetor. Turns out, it was pretty close to 3/4. Not sure exactly where it ended up, but probably close to 3/4 turns.

[@FilmDich]

17:07 Sawing is the coolest thing you can do with your clothes on ;-)

[@novicelumberjack]

Sometimes it really gets ya! This was one of my funnest moments so far. I was very disappointed at first, then when it hit its sweet spot and began singing, I just wanted to dance!

[@waywardshed9721]

What's better, the longer the bar, the less it cares, 2100 is an animal and by far my favourite saw

[@NothingButChainsaws]

The 2100 is the modern day 395xp basically. Yeh they are hard to start but beast of a saw!

[@Woodman_Custom_Sawing]

I'd argue the validity of that. The 2100 had a larger stroke but same bore. The 2100 predates the 395 by 2 generations. The 394 is the predecessor to the 395.

[@NothingButChainsaws]

@@Woodman_Custom_Sawing I read where they based the 395 off the 2100!

[@Woodman_Custom_Sawing]

@@NothingButChainsaws I dont know where you read that but like I said, the 394 came before the 395. In fact, the 395 is the same as the 394 except it has a rubber intake boot and a quad transfer design. If anything the 394 is more similar to the 2100 than the 395 because the 394 has dual transfers and a block style intake. Everything you said about the 2100 being a modern 395 in your first post doesnt make sense.

[@woofy548]

Have you ran a 500i or a 395xp?

[@larrywarner9314]

Holly ring gap hopefully you put new rings in that saw

[@novicelumberjack]

So, I thought the same thing. Turns out, thin rings had a huge gap because there is no cutout for the pins. Normal. I checked, it was at .080! But that's just how the thin rings are. Clearly, it's not down on compression!

[@matticus6339]

Left side muffler bolt is backing out.

[@samishsawworks5870]

Admittedly, I didn't watch the first video of this saw when you got it. Have you deleted the governor in the carb yet?

[@novicelumberjack]

No, just new seals and gaskets throughout. Made a real nice runner for someone. I only need a saw this big for milling, and well...I've also got a 3120XP. So this saw was always intended to be a flip for me.

[@samishsawworks5870]

@@novicelumberjack Well that's going to make someone very happy! The money is definitely in them if buy 'em right...... and man, you bought it right!! Good work! They do have a power/feel like no other! Fun stuff!!

[@simpleman4224]

👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@shakdidagalimal]

17:00 He has a near x-ray camera going there you can see the bar a bit through his cookie slice... HAHAHAH

[@timvandervest5575]

Tinman has a 2100 he has been working on. Kains Kustoms has a 2100 he has been working on. And the Novice Lumberjack has a 2100 he is working on. The Novice Lumberjack is the only one with a log big enough to be worthy of the saw. Theirs saws start a lot easier though!

[@timvandervest5575]

Oops, Tinman is working on a 298. I enjoy watching them all!

[@novicelumberjack]

Thanks for noticing! I like watching them too, but man...somebody needs to deliver those fellas some big chunks to cut into.

[@bradford216]

👍🏼

[@adriancollins7236]

Sorry just my opinion i would run it a little fat/rich modern fuel burns a lot hotter than the fuel it was designed to run on

[@cungcapmaycuamaycatco]

Tôi ở viêt nam có 1 máy như vậy

[@hatred889]

Send it to iron pony 🐴

[@lassila3]

Beautiful. But Please for the love of god, earprotection!

[@novicelumberjack]

Huh? What'd you say?

[@lassila3]

@@novicelumberjack Ha! HELLO YOU GOTTA WATCH YOUR EARS

[@MeagerMillionaire]

The 2100cd struggle is real!