** (Important) Please don't connect both NodeMCUs with the laptop at the same time. And also use different 5V power supply for each NodeMCU. Otherwise, false turn on and off may take place. Thank you.
@shahabakhtar66593 жыл бұрын
Which model we use nodemcu esp8266...................?
@duncanx993 жыл бұрын
That's remote control - it's not Home Automation...
@vovanhoangkimpro58223 жыл бұрын
your program is faulty, if you press and hold the relay button, it will jump continuously
@TechStudyCell3 жыл бұрын
I have used NodeMCU 1.0. please visit the purchase link from description
@arkamondal133 жыл бұрын
Program is faulty. Only relay 2 toggles .rest are correct.
@smskundu120 күн бұрын
MANUAL SWITCHES IS NOT WORKING PROPERLY, RELAYS ARE SWITCHING ON & OFF CONTINUOUSLY FOR SWITCH 2, 3 & 4, SWITCH 1 COULD NOT OPERATE RELAY 1. ALSO RELAYS ARE GETTING STUCK SOMETIMES AFTER SWITCHING OFF. WIFI LED IS ALSO NOT GLOWING THOUGH CONNECTED TO WIFI AND OPERATIVE THROUGH BLYNK APPLICATION (BOTH WEB AND ANDROID APPLICATION). PLEASE HELP TO RESOLVE THE ISSUE. I AM USING Node MCU ESP8266 V3 (LOLIN CH340 chip).
@HRTechnologyProR3 жыл бұрын
*_Can i use this project using regular home switch to Manual control?_*
@TechStudyCell3 жыл бұрын
For that you have to modify the code and use Acebutton library. will make a video on it soon.
@HRTechnologyProR3 жыл бұрын
*_@Tech StudyCell OK THANK YOU SO MUCH ❣️Please make a video on it❣️_*
@agrabadchittagong462910 ай бұрын
Dear Sir, Good Evening , Hope you good well.... I try to made it after learning/viewing from this tutorial.... by using (1) Arduino IDE 2.2.1, (2) Blynk Library version 0.6.1, (3) Nodemcu ESP8266 (ESP-12E Module)... But After completing this project I faced a problem.....that is my device shown 'Offline' status. For this issue I failure to operate/active this project. I also enclosed a screenshot of my device dashboard to your facebook messanger. Kindly help me to fix the problem... Thanks
@bbdas523 ай бұрын
Thank you very much for the excellent videos. Can you please tell me can it work world wide?
@anandhurajeev4046 Жыл бұрын
Sir, pls uploade a vedio of home automation, it consists 16 Chanel relay, each realay control manually + IR+ BLINK
@AneeshJonwal6 ай бұрын
Doesn't work now. I spent one month trying. Blynk code keeps getting updated and code provided in this video doesn't work anymore.
@ishdemon_3 жыл бұрын
Blynk sucks since it uses Http/https which is very heavy protocol and not suitable for iot. Instead use Mqtt protocol. I think blynk should move to mqtt.
@mrsachink70Ай бұрын
if i have 10 appliances in a room can i use 1 esp 8266 for 10 relay module ?
@hk09542 ай бұрын
Kindly make the same video by using esp32 and rainmaker app
@Zack_pak3 жыл бұрын
how can i make an 5v cruunt??? can i use an data cable or charger for nodemcu to give 5v cruent kindly make an video on it how to give 5v crunt to nodemcu at home using cheap product
@BlessyJoy-er5ew5 ай бұрын
How to make energy management system for home automation using wireless sensors and actuators
@rameshniroj22253 жыл бұрын
CAN CONTROL 8 RELAY MODULE IN NODEMCU ESP8266 ??????.?
@saiots86513 жыл бұрын
Bro pleas make a video on this automation with multiple node mcu in which we can use traditional switches like in our room switch boards to on/off the load instead of using push buttons Thanks bro in advance
@TechStudyCell3 жыл бұрын
Okay. Will make video on this
@Retro_12 жыл бұрын
I am unable to access the Gerber file how can i open it?
@JitenderKumar-pz1hq Жыл бұрын
Bhai mere esp 8266 project ki setting nhi ho rahi h kya tum meri help kar sakte ho please
@iyyappaniyyappan25653 жыл бұрын
Bro many km we can control the bulb 💡💡
@Angel_ways_11222 жыл бұрын
can i use touch button in push button
@matthiash.4542 жыл бұрын
You have 220 volts AC____bulbs connected to the output of the relay I want to connect WS2812B___ 5 volts DC is this possible ?
@asadmirajofficial62063 жыл бұрын
How to connect 2 or 3 mobiles with a single nodeMcu. Because in 2 or more mobiles blynk apps have 2 or more AUTH token numbers. So how can we adjust many AUTH tokens in a single Code
@LucidFX. Жыл бұрын
GREAT video - thank you. How can i have 6 ESP32 and only control 1 Servo on each - press one button turn ALL servos to position 1, press another button return all servos to position 0 - may all be different degrees
@electronic79793 жыл бұрын
Very good project 👍 I liked it
@TechStudyCell3 жыл бұрын
Thanks
@aquinindiawatersensors3273 жыл бұрын
blynk bridge possible like push one nodemcu switch another nodemcu on nodemcu to nodemcu communication with blynk
@arkamondal133 жыл бұрын
I made a same to same project.but pins are different.d1,d2, d5,d6 . I use seperate power supply for node mcu and 4 relay's. After starting the project, only relay 2 connected with d2 toggles. Rest are controlled by blynk or manual switch normally. If i change the output d2 pin to another relay, same problem occurs. I dont understand what's the problem is! Please help. Thanks in advance.
@davidperets99973 жыл бұрын
how connecting the electricity? how to get to lamps? where to put the device? on the wall without any box? very risky From my experience! why need one modul for every room if one can deal with 4 lamps? you know that the switch must be on for the device to work, otherwise it will be more complicated and expensive. i don't know how much you understand about the electricity, but the diagram of elecricity wires are not real, it's not connect with the Electrical outlet But from the junction box. nice idea but not practical, even you didn't maked for real because you need to deal with the electricity.
@pierricdoublet6248 Жыл бұрын
Super,thanks for sharing. Do you have the same possibility on blynk 2.0?
@adilabusafa3 жыл бұрын
أهلا وسهلا بك مشكور .
@shija1999 Жыл бұрын
Hi Can you please send the BOM and pick and place files for SMT services to use this pcb.
@sarfarazalam2953 жыл бұрын
How many devices can be attached to a blynk server? Is there any limitation of connected devices?
@TechStudyCell3 жыл бұрын
No such limitation. But If you use free Blynk account then you can create only 10 buttons. After that you have to purchase it
@sarfarazalam2953 жыл бұрын
@@TechStudyCell thanks
@vipulpatel78413 жыл бұрын
Make video for blynk app. How to use one project use in multiple devices? Free Add bettary energy ? How to separate room 1 & room 2 ?
@ssyaodeh Жыл бұрын
Thank you very much for the excellent videos. Can you please tell me where can I buy very cheap electronic components like resistors and transistors and others but with free shipping cost to Israel.
@hassanahmad95973 жыл бұрын
I want to buy more energy. I can not do that when i tap 5000 energy it just dancing 3 dots How can I fix that?
@muhammadnor41353 жыл бұрын
help me sir, why is pushbutton number 1 not working even though it has been installed according to the scheme, the relay can only be turned on / off using the blynk application, what is the solution? thank you
@rustamkureshi82463 жыл бұрын
can i use esp32 in same program and project
@TechStudyCell3 жыл бұрын
You have to include different library and some modifications required in the code. Will make video on this.
@rustamkureshi82463 жыл бұрын
@@TechStudyCell please make a video esp 8266 and esp 32 board working both this project
@AnandKumar-ys4pq3 жыл бұрын
Hi, I need this project PCB Gerber file. But small changes required. Which is we only provide input of the 230v which will convert to 5v for node MCU and relay operation voltage. If possible please post that kind of Gerber file. Thank you....
@hemanttechnical88993 жыл бұрын
Bhai aap hindi me baat karte to or jada acha hota.
@saiots86513 жыл бұрын
Bro you are great.... you are doing really well bro keep it up ❣️❣️
@TechStudyCell3 жыл бұрын
Thanks
@srinivasece46983 жыл бұрын
Hai bro plz make a video on controlling fan 2 fans and 3 lights in on esp32 or esp8266
@payhostingcoorg20902 жыл бұрын
Hi thanks for the videos there is any code for 16ch relay for on off with temp, humidity ,
@t-rexjump12383 жыл бұрын
for the 5 room and 4 button for each room how to use there is only 8 digital pins in esp8266
@abdullahalrazi34913 жыл бұрын
brother, please make a fan controller using nodemcu and blyink
@vedantatechnosolutions59813 жыл бұрын
Can i use this project using regular home switch to Manual control?
@ΠΕΤΡΟΣΠΑΠ-ζ7ω2 жыл бұрын
All good, but when you turn off nodemcu and turn it on again with wifi but no internet, the physical buttons do not work
@cemal81233 жыл бұрын
Blynk is not free. It gives you limitted credit to use buttons so beware
@joshitoshi98353 жыл бұрын
one question tho..how many smartphones can be used to control appliances? i mean for example can we use 10 smartphones to control the relays?
@yogeshitaliya4733 жыл бұрын
Bhai isko firebase ke sath kijiye please
@TechStudyCell3 жыл бұрын
Okay
@razwansaeed22283 жыл бұрын
Great project weldon job. Dear bro When we connect our NodeMCU with the router board. As soon as the internet access ends or offline with blynk server(nodemcu connected with router). Push buttons don't work properly And we have to press two or three times To change relay state.
@TechStudyCell3 жыл бұрын
Sometimes it happens due to loose connection. It's alway better to solder the Push button on zero PCB. You can also change delay(200) to delay(100) in the code.
@razwansaeed22283 жыл бұрын
@@TechStudyCell but when internet back mean blynk server online then all the project work proper... I think when nodemcu tries to connect to the blynk server during that push buttons don't work correctly untill internet back online.
@razwansaeed22283 жыл бұрын
Or turn off the router.
@razwansaeed22283 жыл бұрын
When we turn off the router then also working fine.
@TechStudyCell3 жыл бұрын
Please use different power supply for NodeMCUs. Please don't connect the both NodeMCUs with laptop at the same time.
@jeremytiempo96392 жыл бұрын
Im new in Arduino environment im asking if button is for debouncing ?
@arjunreddy21053 жыл бұрын
bro can we use switches in place of push button please tell me my project is in middle
@kerolosadel68413 жыл бұрын
great job, i have 2 questions could i control them (2 esp8266)with google assistant or alexa or not?? and could i use 8-channel relay module with 8 switch for each esp8266?
@skylai823 жыл бұрын
Blynk already supports link to Google Home?
@yogendrajamsariya11933 жыл бұрын
Please my hearty request to you sir ,,, how to control Rbdimeer with sinric pro,,,
@JitenderSingh-cw3nl3 жыл бұрын
Make project ESP 32 same
@TechStudyCell3 жыл бұрын
Ok
@mobilekalakar3 жыл бұрын
Good
@TechStudyCell3 жыл бұрын
Thanks
@cgrockstar3699 Жыл бұрын
Kiya aap program kar ke MCU module bhej sakte ho kiya
@TechStudyCell Жыл бұрын
you can buy the complete project. pls send email to connect.techstudycell@gmail.com
@JonatanCastro-secondary3 жыл бұрын
I LOVE your videos man, great work. I was wondering if you ever thought about creating a small guide for people just starting out. For example one of the things I'm finding challenging is how to know when to use resistors or capacitors in a project, and how to calculate its values. Thanks once again!
@TechStudyCell3 жыл бұрын
Noted. I will try to make separate video on it
@JonatanCastro-secondary3 жыл бұрын
@@TechStudyCell you are the freaking best man! thanks so much :)
@AliAhmad-ur6rt3 жыл бұрын
isme paid Energy points hai free points ke liye solution batao?
@HaniSharif3 жыл бұрын
Great video man! A quick question: Do you need an internet connection or using hotspot/wifi is just enough?
@АлександрЖидков-я2д2 жыл бұрын
Кнопки лучше не впаивать, а сделать винтовые колодки, чтобы вывести провода для кнопок. А так это просто макет
@mohammadanish13803 жыл бұрын
Sir nodmcu mobile se progiming ki video please
@meanonymous10003 жыл бұрын
bro for router there is limitation of connections . so what if we can make mesh and connect one of the board to router ? can this possible ? if so please share . and if possible can you make the status of relays retain even after power off and on for esp board .
@Helloworld5193 жыл бұрын
Thank you brother. 🙏🙏🙏
@TechStudyCell3 жыл бұрын
You're most welcome
@dineshbarchikar92313 жыл бұрын
Hi can i get the ready pcb plz let me know
@TechStudyCell3 жыл бұрын
Please send email to connect.techstudycell@gmail.com
@wafiullah-shafia3 жыл бұрын
Can I use same circuit and app and code with ESP-12F?
@amitsharma19573 жыл бұрын
Namaskar sir ji main apney children ko training dilwani hai kha se training milegi pls bataye
@suvajitsau71172 жыл бұрын
How to add Alexa in this project
@TechStudyCell2 жыл бұрын
I have made separate project with Alexa
@rajeshkj11583 жыл бұрын
Hi really love this project...sir I want to connect 3 or 4 node mcus.....for another rooms for MCU 1 and 2 we used virtual pin 1234 and 5678 respectively for next MCU which virtual pin I have to configur....?help me sir for that what changes I have made to existing code
@АлександрЖидков-я2д2 жыл бұрын
Ставьте любые значения и меняйте в следующем скетче на них, и в приложении blynk
@garisonsystems23593 жыл бұрын
could you plz give me any suggestion
@TechStudyCell3 жыл бұрын
on what?
@PINOYTECHMARLON3 жыл бұрын
hello sir what is the name of software u use for designed pcb?
@TechStudyCell3 жыл бұрын
Diptrace
@payyavulanaveen69673 жыл бұрын
Here both node mcu and blynk app has to connect to same network OR IF node mcu connect to home wifi and blynk app to mobile network
@TechStudyCell3 жыл бұрын
NodeMCUs can be connected with different WiFi network. But Auth token should be same. Just change the WiFi credentials
@orangerucksack70833 жыл бұрын
Great Project, as a complete noob and getting on in years, if I wanted to add 1 button to turn on/off the 4 lights at the same time , could you assist on how to ????
@jagdishchauhan86832 жыл бұрын
Sir 5pcbka Kitna hota hai jlcpcb me
@TechStudyCell2 жыл бұрын
If you want to purchase the PCB, let me know. Send email to connect.techstudycell@gmail.com
@aslamrahim59353 жыл бұрын
Sir should we need to connect all 4 light to start the circuit or we can use it with single light
@frankmarshall59773 жыл бұрын
great video. can you supply the schematic for the pcb assembly?
@DoyleColony3 жыл бұрын
Is there a way I could use this method with the wemos D1 mini?
@Priteshpotdar3 жыл бұрын
Amazing video Can u Plz share the modifications for 8 channels relay board. Thanks
@TechStudyCell3 жыл бұрын
For 8 channel I will prefer ESP32. I will make separate video on it.
@anil1010it3 жыл бұрын
Can we do this(push buttons) for 8 channel relay module as well?
@TechStudyCell3 жыл бұрын
Yes
@ravirtech12603 жыл бұрын
Hi sir make the 8 channel RF remote and WiFi home automation project
@TechStudyCell3 жыл бұрын
Noted
@fathimabinthsakeer85963 жыл бұрын
Sir my blynk app is not working it showing couldnt connect to server i waited for 2 days no change what to do sir?
@TechStudyCell3 жыл бұрын
First check if the NodeMCU is connected with internet. Otherwise you can reinstall the Blynk app and generate new Auth token. Then try again
@bongmacambodia10313 жыл бұрын
Thank you so much I am success your project code That's perfect .
@bongmacambodia10313 жыл бұрын
I need your telegram
@slyvesterleeward91083 жыл бұрын
Please can u do multiple nodemcus with alexa or Google home
@TechStudyCell3 жыл бұрын
Noted. Will try to implement that.
@diyhemantprojects28413 жыл бұрын
But if I want to control in 3rd room virtual pins are not much , how to do that 🙄
@TechStudyCell3 жыл бұрын
If you need more than 10 buttons, then you have to pay Blynk for that.
@navneethk4373 жыл бұрын
Hello Sir, This is really a nice one. Could you please tell us, when Power Goes and comeback, all the relays are remembering its current state and ON/OF without any manual control? I guess, if we switch OFF the Node MCU supply, the ports states are reset. Please share your views. Thanks.
@TechStudyCell3 жыл бұрын
Thanks. In this project if you turn off supply, it will not remember the previous state. But if you want you can get the previous state from Blynk server.
@kishanmukhia11463 жыл бұрын
Great concept for best home automation.with internet or without internet.
@TechStudyCell3 жыл бұрын
Thanks
@xan4o3 жыл бұрын
Hi bro. I really like to watch your videos. Every time I learn something new. I would like to ask you - is it mandatory to upload same code to both(or N number) of devices with the same token? My idea is(when I saw your video) to upload different code to a few devices with the same token and control them from one device(mandatory avoidind of using same virtual pin). Is it possible? Thank you!!
@TechStudyCell3 жыл бұрын
You can change the code. But for all NodeMCUs, Auth token must be same and virtual pin should be different or unique for each device.
@garisonsystems23593 жыл бұрын
Switch SD3 CONECTION not working
@davidperets99973 жыл бұрын
the others works? how did you connect the lamps?
@garisonsystems23593 жыл бұрын
@@davidperets9997 V5,V6,V7,V8 In that pins one pin switch not working remaining 7 working
@TechStudyCell3 жыл бұрын
I have not faced any issues with SD3. But you can use D4 instead of SD3. Please remember during boot process D3 & D4 should not be grounded.
@TechStudyCell3 жыл бұрын
Already shared the circuit for connecting lamps with relay module during the video.
@udayKumarpatil20083 жыл бұрын
Sir I made this project. But instead of momentary push button I used touch module for controlling appliances. The problem I am facing is sometimes the appliances getting on or off automatically. Please help what could be the reason
@TechStudyCell3 жыл бұрын
Please use different power supply for the NodeMCU. Please don't connect both NodeMCU with laptop at the same time. If you touch Switch then I will suggest you to increase the delay and during the touch the output pin of touch sensor should become low. And most important there should not be any loose connection.
@udayKumarpatil20083 жыл бұрын
@@TechStudyCell Thanks for the reply I am using this project from approx 2 month with single node mcu and working fine. 2 bulbs and 2 fan connected with relay. Total consumption with relays active is 750mA. I am using 5volt 1amp mobile charger as power supply. Touch sensor is ttp223 ia in active low mode. All wiring is properly soldered. Voltage input is supplied through Vin pin. I will monitor with increasing delay. Multiple cases in use observed after approx 1 month are as, 1. All relay in active state suddenly automatically changes the status to off or vice a versa 2. 1, 2 or 3 relay are active suddenly automatically balance relay get active or vice a versa 3. Some time touch sensor did not work but can be change relay state through blynk 4. Some time I have to touch and hold the the touch sensor for 2, 3, 4 seconds to change the relay status I prepare my project from your below link kzbin.info/www/bejne/nIOmh6tsrrCij9k Sorry I mistakenly asked the question in this project Any suggestions will be helpful
@vishaljain61303 жыл бұрын
please make a video on wi-fi universal remote using esp8266 nodemcu & Alexa
@TechStudyCell3 жыл бұрын
ok
@vishaljain61303 жыл бұрын
@@TechStudyCell Keenly awaited
@mohammmedadnan69423 жыл бұрын
2:47
@wafiullah-shafia3 жыл бұрын
Good Thank you Mr If I want only for one Rome what should I remove from code and circuit?
@TechStudyCell3 жыл бұрын
No change required. Please refer to this video kzbin.info/www/bejne/nIOmh6tsrrCij9k
@arachchigerasika80563 жыл бұрын
Can you create 16 channels home automation with voice command , manual switches and using application
@TechStudyCell3 жыл бұрын
It better to use 2 ESP32 for 16 relays with manual control. will make video on this soon.
@sampathmadugalla46243 жыл бұрын
@@TechStudyCell Thank you.
@shahabakhtar66593 жыл бұрын
Can we control with multiple blynk app
@TechStudyCell3 жыл бұрын
You can control from different smart phone. Just login same Blynk account.
@elmermandiade73093 жыл бұрын
helo bro, will it work with (router) WIFI but without internet?....
@TechStudyCell3 жыл бұрын
To control the relays from Blynk, the NodeMCU must be connected with internet.
@popatdevkar37933 жыл бұрын
Blynk server is down
@michaelzajac52843 жыл бұрын
What if it burn?
@jyotirmoymandal55663 жыл бұрын
It is fantastic video ever , thanks dear
@TechStudyCell3 жыл бұрын
Glad it helped
@satreaaji2 жыл бұрын
Will it work on blynk 2.0?
@TechStudyCell2 жыл бұрын
Will make video on this soon
@satreaaji2 жыл бұрын
@@TechStudyCell thanks
@popatdevkar37933 жыл бұрын
Bhai Blynk kaa server fail aa raha hai kyaa karu ?
@michaelzajac52843 жыл бұрын
Use the XOD?
@noushadolakara3 жыл бұрын
Dear well description most useful thank you
@TechStudyCell3 жыл бұрын
Most welcome 😊
@noushadolakara3 жыл бұрын
@@TechStudyCell dear why the esp32 is getting offline after 5 to 10 hours ,after that we need to restart by push button or power off and on,any solution for it
@tejorshibarik603 жыл бұрын
Can I use switch instead of push button
@TechStudyCell3 жыл бұрын
You have to use AceButton library and modify the code accordingly. Will make video on this