Home Made Navigation System - Part 6: How To Relocate GID To Roof Console

►DragonBoard 410C Starter kit $84.99 - amzn.to/2gz2mnd
► 7" LCD Display Screen and Touchscreen Kit (800*480) amzn.to/2gmoxiu
► 7" LCD Display Screen and Touchscreen Kit (1024*600) amzn.to/2gWEBbU
► 7" LCD Display Screen ONLY (1280*800) amzn.to/2gWKRk1
► Passive Gps Antenna Ufl amzn.to/2gmBI36
► Arctic Silver Thermal Paste amzn.to/2gmABAe
► Aluminum Heat Sinks amzn.to/2fN1c5A
► Cooling Fan amzn.to/2fNaAWV
► HDMI Cable amzn.to/2fN6X3d
► Dupont Cable 10cm Male to Male amzn.to/2fN8eY4
Support us on Patreon: goo.gl/tPE7zd
Visit us at: www.opelpedia.com
Follow us on: / opelpedia

[@JoeLouisPepsi]

Amazing project! Keep it up. I can't wait to see the final results. writing from Montreal Canada

[@opelpedia]

Thank you for the feedback!

[@harrymcmahon6876]

Nice video, but maybe turn down the music so I can hear your instructions a bit clearer. 😃

[@francosalvitto5224]

part 7?

[@IZIBILIRIBILIZIRAN]

Can't wait next part! I will try it to.

[@Azzerman100]

What cables do you need to extend this sorry I couldn’t quite hear it over the music would be a great help thanks

[@skybax1]

Ethernet cable, i used some regular CAT 5E cable

[@ImreVeres0]

The ethernet cable has 0.22mm thick wires while the DIS seems to have 0.5mm cabling. Don't you see this a problem? Have you used this extension solution for a longer time, have you experienced any problems, e.g. display issues of the GID? Thank you.

[@opelpedia]

i have used it for 1 year, others for longer, some even 5+ years

[@HribanEugen]

salut baieti. faceti operatiunea asta si contra cost?

[@invinet2016]

where is part 7?

[@cosb3663]

salut. imi poti spune care sunt pinii (dintre 1 - 32) prin carese face alimentarea de la baterie? as vrea sa folosesc o unitate ramasa ca si ceas de birou/gadget alimentat la un alimentator de 12 V. multumec

[@adrianmatei2339]

Salut, am o intrebare, pe o unitate cdc 40 opera pot face chestia asta?

[@unified95]

Cum fixezi gid-ul/bid-ul etc in plafoniera?

[@jasonvorxis]

this will bee my next project of transforming the astraa, looking forward +opelpedia for next videos, and have a question, does it sell anywhere ready kit for kabel ?

[@opelpedia]

to my knowledge no

[@jasonvorxis]

is the cable with 8 wires, for Ethernet ?

[@opelpedia]

yes its a Ethernet cable

[@smsmclub]

Very interesting thank you

[@unified95]

Cine e baiatul care a facut lucrarea? eu am nevoie doar de montare aux pe cdc40 si mutare ecran. am tableta si am cine sa imi faca si rama

[@nicolaeandrei4474]

Cit costa un sistem "la cheie", pentru montat pe masina? Sunt interesat.

[@GateKommand]

Very interesting thank you!

[@opelpedia]

Thank you for the feedback!

[@YTJak2000]

Episode 7?

[@dragankrstevski7629]

please, next part. I know You are editing. Can you upload somewere without editing so i can get to dowNload.

[@gelumicu199]

Pana acum ai inadit doua cabluri,mai departe ...?

[@eDiiSsOn93]

very good video

[@opelpedia]

Thank you !

[@iuliancalin4341]

Salut, apare și continuarea?

[@eDiiSsOn93]

when you go the next tutorial browser opel?

[@opelpedia]

we already have several video in progress, was a very busy period in the last month

[@cretzu8523]

Același lucru l-am făcut si eu dar Acu un an 😜😜😜

[@opelpedia]

Felicitari, ce ai pus in locul GID-ului?

[@ovidiulupu1811]

cum lai fixat sus as vrea sa fac si eu...

[@andreirazvan703]

salut din nou. interesant ce ati facut. am cd 70 navi si displayul meu, in iarna a inceput sa imi faca niste linii subtiri, neuniforme, luminoase. unde pot sa va trimit o poza si sa va dati cu parerea ce este si daca se mai poate face ceva ? andrei - sibiu

[@opelpedia]

salut Andrei, sigur te asteptam pe site-ul nostru www.opelpedia.com

[@lucian437]

Va salut vreau sa va intreb.in locul GID-ului pe care il mut in plafon doresc sa pun o tableta Nexus 7 .cum pot sa o inperechez cu GID-ul.astept un raspuns felicitari frumos totorialu.🖒

[@opelpedia]

nu se imperecheaza, tableta functioneaza independent

[@lucian437]

opelpedia multumesc

[@Makenomistake.]

Îmi faci și mie te rog contra cost normal ? Sau durează foarte mult

[@bahadrturker4132]

Ethernet cable?

[@opelpedia]

+Bahadır TÜRKER yes

[@bahadrturker4132]

opelpedia do you how cutting roof plastic panel

[@opelpedia]

with a very thin milling blade, this weekend i will post episode 7

Thanks for the tutorial. You replied Bahadır Türker with yes for the Ethernet cable Cat5 I assume, how much meter should I buy?

[@mihaibejan7389]

salutare, pe cand avem tutorial final , sa ne apucam de treaba ? :) multumesc anticipat

[@opelpedia]

Salut, cat de curand, nu pot aproxima, voi incerca sa finalizez cat mai repede.

[@dragankrstevski7629]

did You recorded next video?

[@opelpedia]

+Dragan Krstevski yes I have 2 episodes recorded and a 3rd on the way, need to find some time for editing.

[@dragankrstevski7629]

opelpedia cant wait. Thanks man. I am allready baying parts. Bought CID frame and 7 inch display. Your videos are moust helpfull.

[@FFaSsTeRR]

Salut! Am computer de bord mic pot pune mare?cum pot vedea consumul pe asta mic?

[@opelpedia]

Poti face upgrade la CID sau GID, pe cel mic nu ai cum

[@FFaSsTeRR]

+opelpedia Multumesc pt raspunsul rapid! Daca imi iau Cid sau Bid nu vreau neapaeat color il pun in locul la asta si gata nu trebuie nici o modificare ? il conectez la mufa actuala si atat ??

[@opelpedia]

va trebui sa imperechezi ecranul cu playerul, fire nu o sa iti trebuiasca sa tragi

[@FFaSsTeRR]

+opelpedia ok cand fac achizitia iti voi cere ajutorul Mersi o seara buna!

[@opelpedia]

sa ceri security cod pentru ecran

[@RoadsterAlex]

music is too loud though :( cannot hear you

[@opelpedia]

unfortunately i realized that after i uploaded the video... nothing i can do now

[@ionutzaharia5537]

Salut! Un email de contact se poate? Sau cum pot lua legatura cu dvs? Merci mult!

[@opelpedia]

[e-mail]

[@mariosploutarxou9536]

What about part7???

[@opelpedia]

Part 7 is in delay because the support for DragonBoard 410c from 96boards is horrible. I'm having problems integrating the touchscreen driver into the Android distro, we are a very small channel and can't afford to pay a developer for this unfortunately. if anyone is able to help we are in need.

[@RoadsterAlex]

Use Pine64 :)

[@opelpedia]

im preparing a closing video with a tablet solution and a 3d printed frame

[@moxadrian]

opelpedia on what model of car?

[@PetroPelenskyy]

first you need to disconect negative not positive

[@opelpedia]

you are right, it reduces the chance to make a short circuit with your wrench touching the car, for me is not that much of a concern.

[@PetroPelenskyy]

opelpedia Anything can happen! ;)

[@eDiiSsOn93]

next video my friend ?

[@opelpedia]

Part 7 is in delay because the support for DragonBoard 410c from 96boards is horrible. I'm having problems integrating the touchscreen driver into the Android distro, we are a very small channel and can't afford to pay a developer for this unfortunately. if anyone is able to help we are in need.

[@sergeys.9943]

Did you manage to add a touchscreen driver to the Android distribution? And also how did you solve the task of switching dragonboard to sleep mode with minimum energy consumption (less than 5 ma)?

[@TheErikassxx]

music is too loud

[@opelpedia]

indeed, to late to fix it now

[@TheErikassxx]

You can add subtitles.

[@opelpedia]

Eri Kass Thank you for the suggestion, we have added the subtitle!