How To Install A New Door To An Old Frame | Easy Step By Step DIY Guide

[@fjzero63]

I've watched a ton of videos on how to install a door. This is by far the best and most thorough explanation of the steps needed. Gives me the confidence of taking on my own door install. Great job!!

[@MikeEdwards-o2y]

That's the best tutorial I've ever seen, thank you for uploading.

[@rogerash]

Great video. Well thought out, no over complication with jigs etc. Not everybody fits doors every day so no deire go invest in tools thay will never be used again. This tutorial has given me the confidence to give it a go!

[@homeimprovements]

😁🙏🏼

[@ninjasixrr]

If only all old door frames where that good!🤔

[@tomevans8749]

Yeah, I moved into a 1960s ex-council flat and every frame was wonky. Great way to learn the craft though, and managing stress

[@matthewsenior9751]

If only any were 😂

[@ruthrodriguezmetz6724]

I just moved into a studio apartment, and the gaps between my doors and their liners are horrendous. I love seeing what steps maintenance have skipped when installing the doors. Your video makes me feel more confident to fit a new door myself! This is such an awesome tutorial. Subscribed

[@homeimprovements]

Love that!

[@jonnyhifi]

Best video I’ve seen on fitting a door and I’ve watched lots - it is worth watching other people’s takes, but I’d say you have the best thought out method that points out a few subtleties others don’t mention . I don’t fit doors often - and am about to fit 4, and hence wanted to remind myself of a logical sequence to tackle them. Thanks !

[@chrismiles-witchell9374]

You lads remind me so much of myself it`s unbelievable.........I`m better looking obvs, but you & SkillBuilder are probably the best on KZbin. I`m a Floorlayer & hear so many in the trade saying they won`t even ease doors for clients after fitting new carpets or wood floors. Keep it up lads, i did my first bullnose following your method this week & it was the best i`ve ever done, so i owe you one............

[@chrismiles-witchell9374]

Your Dad`s name ain`t Chris is it.......?

[@homeimprovements]

Nice one Chris appreciate it mate 😁💪🏼💪🏼💪🏼

[@homeimprovements]

Nah

[@akilby8022]

Great to see you smiling again

[@dw7231]

These videos are legendary. Keep them coming.

[@EnglishOak001]

Seriously, these are the best guys for home improvements/ DIY, even better then Tim the Tool man Taylor. 👍

[@homeimprovements]

🙏🏼🙏🏼🙏🏼

[@Reargunner-o7h]

Another new subscriber here. Top class instruction. Clear and complete.

[@homeimprovements]

Awesome, thank you!

[@chrisdavies8066]

Brilliant video step by step showing you what to do. Think il try doing mine myself

[@roberthamilton2334]

Very explanatory. I've a few doors to fit on a rental property ,after watching this I'll do it myself !!

[@jamesknightreading]

Really interesting and helpful. Many thanks.

[@edwardmorris8284]

thank you for this video fellas, really happy you decided to make this and showed multiple methods. Wish me luck ;-)

[@gluehoof573]

This is absolutely top notch. Not everyone who's got skills can also pass them on so well. I've got four doors to replace and this will help me no end. Not the first time your videos have helped me out. Cheers, guys.

[@homeimprovements]

Great to hear and thanks 😁😁

[@digitalbanananana]

echoing other comments - have doors to fit, watched a few other videos - this is by far the best👍

[@PaulSmith-vt1to]

Excellent video, very helpful. Thank you.

[@russ623]

Thank you. Very informative and a few new tips!

[@matthewrobinson3508]

Very good explanation. I fitted one door today. It should be quicker now after seeing this guy in action..

[@garysmith6142]

Easy the best video for fitting doors. Well done matey.

[@homeimprovements]

Thanks 👍

[@notcharles]

Good idea to measure left and right side of opening to fit a square door into an existing opening.

[@f44had]

Legend, thank you for this video

[@bushwop]

As a locksmith you have given me a few tips I'd never thought about ! I will say that a company called jigtech make a great jig set for putting latches and handles on and the only other tip I would say is forstner bits tend to make a nicer job of the holes especially on the start but spade bits are miles cheaper to buy as if you have normal style handles then work perfectly well as you guys have shown

[@homeimprovements]

Thanks mate 😊💪🏼

[@bushwop]

@@homeimprovements no worries guys, despite my line of work I cant actually hand a door myself but you made it look so easy that I'm not particularly scared of trying it anymore! Keep up the good work and information

[@charlieholdontolove9392]

Your video is the best I have seen and I have seen alot. Thank you for doing a great job on explaining step by step with great info and safety with care. You have given me a boost to put up new entry door up which have been sitting a side for months! 👍

[@homeimprovements]

Wow, thank you!

[@michaelsunderland6569]

Honestly cannot fault these guys i paid a man to do 3 internal doors and the quality is absolutely shocking indidnt even want to pay the guy but he had them already hung i used your guys videos again and im certainly positive that it looks professional so happy with my self to be fair 😊

[@homeimprovements]

😁🙏🏼🙏🏼🙏🏼

[@marcjerrard7648]

just brilliant! many thanks

[@thetruth6693]

Best how to I've ever watched!! ❤️

[@homeimprovements]

Thanks 😁😁🙏🏼

[@mattyj624]

Top job top video lads

[@homeimprovements]

Thanks mate 😁

[@phillipdrozd]

great video im looking to fit these myself those door bags will make fitting easier top man

[@jagpalrayt]

Great job and very well explained!

[@homeimprovements]

Thank you! 😊

[@apollocreed85]

Decent video that well explained

[@homeimprovements]

Thanks 😊

[@benholden4882]

Great explanation. Think I’m ready to go!

[@denisconor648]

Great stuff

[@michaelsmith-mw9ki]

first thing i always do before cutting to height,get a steel square and check from the hanging side that the head of the frame is square ,a common problem you come across and if you have fit the door to the head you may end up with to much clearance on the bottom

[@homeimprovements]

Nice tip that 😊💪🏼

[@woody1380]

Quality video, thanks for making the effort. Love the spacer tip.

[@homeimprovements]

Glad you liked it!😁😁

[@russalternative858]

Absolutely brilliant, very detailed and every step I needed covered. Also covering those that do not have all the array of power tools. Nice one dude.

[@homeimprovements]

Thanks mate 😊💪🏼

[@StuartLebrun]

Awesome, thank you for your detailed help and explanations, made it look easy but very doable.

[@homeimprovements]

Thanks 😊😊

[@Skyline26r33]

Excellent well explained 👍👍

[@homeimprovements]

Thank you 🙂

[@Fasttrackfightingskills]

Bloody fascinating... Nice one Sir

[@haydnwilliams877]

Quality video. Nice one 👍

[@homeimprovements]

Thanks 👍

[@Hypn085]

Great video and really well explained, actually makes it look less scary to do as a DIYer

[@homeimprovements]

Thanks 😁😁

[@BushmanOutdoors]

First video of yours I’ve come across. Subscribed on the spot. Really well paced but descriptive content. Great to watch.

[@homeimprovements]

Awesome, thank you! 😁😁

[@Mp-jg3or]

Brillant Video

[@homeimprovements]

👏🏼

[@sjpiran]

I'm so pleased I found this channel and door hanging video. Thank you for explaining everything so well. I've subscribed! 👍☺

[@homeimprovements]

Awesome! Thank you!

[@alec1113]

Cheers, mate,thanks for the video . Don't take this the wrong way , you sound like Sid Snot 👍

[@skipjames8437]

Thanks, you got my subscription.

[@homeimprovements]

Awesome, thank you!

[@alanweir37]

Excellent advice and video cheers

[@homeimprovements]

Thanks much appreciated 🔥

[@Kelsdoggy]

Absolutely brilliant video! So glad I found this. Wish I’d seen it sooner. I’m now Halfway through 1 door and doing it every way wrong 😂

[@homeimprovements]

Glad it helped! 😁😁

[@AussieInvestigator]

A fantastic video tutorial. It gives me the confidence to tackle the job myself. 👍

[@homeimprovements]

Thanks 😊💪🏼

[@hexboxx735]

great tips bro thanks

[@homeimprovements]

Thanks mate 💪🏼

[@johnaslin2635]

Top Man.

[@homeimprovements]

🤙

[@elaineburkinshaw3762]

Brilliant another to do on my list DIY is getting expensive ❤🎉

[@homeimprovements]

🤣🙈🙈

[@sjfarrell2.0]

Proper job 👌

[@homeimprovements]

😁🙏🏼

[@MrFatdaz]

Brilliantly explained! I’m actually going to try and hang my doors myself! 🤞🏻🤞🏻

[@homeimprovements]

Nice 😁👍🏼

[@rehaanq]

Great video. Could you do a video on how to remove and install door linings?

[@homeimprovements]

Great suggestion!

[@mubarek09041985]

Thankkkkk yooooooouuuuu

[@stoneyj1a1]

good work. This guy is definitely a Dewalt guy. I wonder if they have Milwaukee tools over there.

[@homeimprovements]

I had two Milwaukee gave them away to a follower of ours 😊💪🏼

[@danjones3956]

Cracking video 👍

[@homeimprovements]

Thanks 👍

[@rehaanq]

Could you perhaps do a video on how to install a composite front door?

[@royboywales]

The grove on the base of the plane is for taking the sharp edges off. Carpenters like myself call it the Arris.

[@JaiUneGuruDeja]

Your advice about avoiding cheap hinges made me subscribe. Thank you, Tool Brother.

[@homeimprovements]

Thanks for the sub! 😁👏🏼

[@easypainterslondon]

cool video good job

[@homeimprovements]

Thanks!

[@sidsausage2192]

Great stuff, thank you. Will come back to this in stages as working through. Worth getting an electric planer, do you think? The little air bags look handy

[@homeimprovements]

In old frame electric planer is brilliant bit of kit 😊

[@sidsausage2192]

It’s been tricky to use for me but getting the hang of it. Win bags and combination square added to collection, planer borrowed. Thanks so much for this vid, it’s so clear, got time stamps etc. What do you think about chamfered/bevelled edges on doors? Worth doing/necessary? I worry about splitting it with the plane but I think it has one of those grooves that you can use on a corner@@homeimprovements

[@GMLondon]

Brilliant video mate thank you. Is there a reason the hinge goes on slotted side to the door at all please? Thanks mate

[@homeimprovements]

Not that I know of mate just how I do it 😊💪🏼💪🏼

[@GMLondon]

@The Home Improvements Channel UK thanks mate keep up the good videos too 😀👌

[@homeimprovements]

Thanks 😁😁

[@gavin6290]

Do you get your decent hinges and other door furniture from somewhere in particular?

[@homeimprovements]

Just brand eclipse for instants 😊

[@raypeasley]

Hi.... Great video btw.... but quick question.... if these are finished doors... ie... no need to paint or oil/varnish...... then what about when you shave the sides of the door to make it fit.... you have now taken the 'finish' off... do you re-oil that part?

[@jackmckeown2053]

Hi why are you using an impact driver for drilling out the doors

[@AllStarsOfComedy]

Fab Video - Is there a way of patching up the old hinge cutouts?

[@homeimprovements]

We’ll try cover that in a video 😊

[@Alexandernevermind1969]

I’ve used wooden Venetian blind slats with pretty decent success. No professional tho’

[@jeffskotz8701]

You forgot to check for the door bevel. Some expensive doors still use them

[@garyhill1668]

Very rare to measure one side of the frame , relying on the top being level, but, must admit he does mention that !

[@ChrisLee-fw5he]

Just want to say thank you took me best part of 4 hrs with a manual planer and chisels but it’s on and working and doesn’t swing 😂

[@homeimprovements]

That’s brilliant 😁👏🏼👏🏼👏🏼

[@heritage_carpentry]

The hinges go on the other way round. Reason being that the weight of the door is held on by the side with 3 bits attaching the pin to the plate, not the one with 2. It supports more weight which is why it’s designed that way (qualified Chippy btw)

[@homeimprovements]

Good to know 😊👌🏼👌🏼

[@bobmartin5101]

Your precise explanation is very much everything. Cheers. Great series of informative videos. Do a Velux if you get chance, please.

[@homeimprovements]

We will try and thanks 😁👏🏼

[@DivyeshPatel-s9w]

We are looking to get a glazed internal door which will need trimming by 2 cm(In height)to fit into the existing door frame. However, recommended trimming allowance is 1.2 cm from height. Can you suggest a solution as we really like the door?

[@homeimprovements]

Just take it of the bottom you won’t see the exposed chipboard not uncommon to see 😊

[@DivyeshPatel-s9w]

@@homeimprovements Thank you so much :)

[@ezzydoksani4261]

Class

[@homeimprovements]

😁🙏🏼

[@davidbray6515]

I love the long estwing framing hammer but people always hold them as if the hammer is 5 inch long lol

[@adamgill2053]

Hi mate, what's the best way to fix up the old frames? Mine have notches cut out from old hinges and striker plates. Is there anyway to fill them or is it a case of a new frame? Cheers

[@homeimprovements]

You can or splice new timber in to repair the damage 😊

[@Participant616]

I use Ronseal wood filler. Invisible once sanded and painted. Might work for you.

[@tribalm0nkey]

On these particular doors which side does the lock go on ?

[@homeimprovements]

Normally doesn’t matter on solid doors 😊

[@tribalm0nkey]

@@homeimprovements I’m fitting 6 that are similar tomorrow so the reply came at the right time as there’s no markings on the top of the door. Appreciate the reply and the video boys, enjoy your weekend 👍🏽👍🏽👍🏽👍🏽

[@brianmcintyre14]

I have just had one of these doors fitted, Oak. The joiner used good quality Eclipse hinges, but only 2 - do you think it will hold up OK? He reckons it won't go anywhere, I'm more of a belt and braces kind of guy, he's coming soon to fit another....wondering if I should insist on 3?

[@homeimprovements]

I don’t like to judge what others have done tbh Brian 🙈🙈 personally 3 on oak doors but the hinges are plenty strong for only 2 😁

[@brianmcintyre14]

@@homeimprovements 😁👍👌

[@davidbowser5274]

Awesome video nothing like the sound of a door closing properly. cheers

[@homeimprovements]

Thanks mate 😁

[@woody1380]

"I've heard that you want to 'ang a door Tommy Shelby." "You heard right Mr Solomon"

[@adelemccarthy9365]

Do you have one showing how to install a front door with letterbox and Yale lock installation?

[@aaron-o5u1g]

Always use a 3 inch latch puts it in the centre😊

[@homeimprovements]

Agree this is a cheap kit however handles and latches

[@jackpartridge7891]

Which specific door on the website is this please as there’s a few different names? Please help thank you

[@aylorpaul39]

Dilema, need a new door but frame is not standard and all doors except solid wooden doors can only be planed by max 10mm and i need 12mm each side and dont want to spend extra on a solid door , so my only option is to reduce the door frame size. Need to plane across width any tips on how to avoid breakout? Or is there another solution?

[@adrianquirolo7683]

Out of curiosity why do you chisel across the grain and not with the grain when sinking the hinge

[@homeimprovements]

Prevents the chisel deviating 😊

[@adrianquirolo7683]

Deviating off the intended line? I'm a young carpenter and always got taught to work with the grain seems as though depth would be easier to judge the way you do it. Appreciate the reply 👍

[@cellshaded]

The audio is gone on this? Only the voice though. The music is still playing in the transition sections?

[@harrysmith7046]

Where is the door from? Is it oak pre finished ? What colour

[@homeimprovements]

It’s cottage style oak veneer unfinished but are available pre finished also 😊

[@darreninstone3626]

Almost exactly the way i fit doors... Only exceptions i use a door lifter rather than bags and take the door off to fit the latch... I just feel more in control with the door on its side and drilling down into it rather than drilling at waist height with the door hung. Just personal preferences makes no real difference. 👍👍👍

[@homeimprovements]

Nice mate Yh I get what’s your saying 💯 😊😊💪🏼💪🏼

[@davewright9312]

I'm the same with the tubular latches much prefer to do them off the frame

[@Getintheshed]

Could you use a multi tool to chisel out for the hinges?

[@homeimprovements]

Maybe never tried 😊

[@TheUkGrimekid]

if your a cowboy yes

[@jacqcook4036]

If I had the tools, I’d give this a go myself

[@richardbullough7269]

On really old frames template the head on to top of door, then measure height, head of frame could be really out of level.

[@KerryDoran-u2c]

I really need these guys in my life, are they married ?? Lol xxx

[@agassivalls5748]

This is why we don’t offer prep to fits. Full replacement baby. In and out

[@Martin-po3mw]

Lads you just cost me a fortune...you made it look easy so ordered 11 cottage oak doors😂. Just a shame my existing 1970's frames must of been fitted by a first year apprentice!! They is like well pissed bruv

[@homeimprovements]

🙈🙈🙈

[@mitch3683]

I notice you hinged the door opposite to original hanging side off frame, the light switch is now behind the door😮

[@homeimprovements]

Good spot but it’s for future works the room is being split and house extended 😊😊

[@sportmurphy4392]

How many doors like this would you fit a 8am to 4pm day?

[@michaelpatten5362]

If my door has no indication as to which side is for the hinges does this mean I can use either side?

[@gafffisher]

I asked a similar question at my local builders merchant and they said yes door are the same on both sides

[@MichaelNahirny]

what about the door head not being level you never checked the other side of the frame or used a level to check any unevenness