Homemade Circular Saw Guide / DIY Track Saw

[@tjm0746]

This is just about the best home made track saw I’ve seen yet.

Thank you very much. I'm glad you liked it. You know you can find PDF plans in all my videos, right?

[@hasangergin2329]

Kendime testere kılavuzu yapmak için araştırmaya başladım, seyrettiğim videoların sayısını hatırlamıyorum. Baktıklarımın içinde bu kadar zarif, makul malzemeleri bu kadar verimli kullanan bir tasarım ve detayların bu kadar ustaca çözüldüğü başka bir örnek görmedim. Tasarımınız da uygulamanız da hayranlık verici. Bu kadar büyük emek ürünü bir tasarımınızı ve deneyiminizi cömertce paylaştığınız için çok teşekkür ederim. Yolunuz açık olsun, saygılar.

Güzel yorumunuz için çok teşekkür ederim Hasan bey. Ben yaptıklarımı imkanı olan herkes yapabilsin istiyorum. Tabi bazen 3 gün süren bir projeyi 15 dakikada çok anlaşılır şekilde göstermek zor ama elden gelen bu. Biliyorsunuz PDF planlar her videomda mevcut. Videoyu dikkatli izleyen projeleri de alınca biseyler yapabilir diye düşünüyorum. Tekrar teşekkür ederim. Selamlar saygılar

[@Masterstas-nn]

Yapımı çok basit ama çok kullanışlı ve vazgeçilmez bir cihaz. İyi iş. Sen gerçek bir ustasın. Rusya'dan selamlar.

Çok teşekkür ederim. Beğenmenize sevindim. Çok işe yarıyor gerçekten. Türkiye'den selamlar

[@НиколайВетлугин-т7в]

Больше спасибо всем умельцам , в том числе и тебе за дельные выдумки. Я по профессии ни столяр, ни плотник , но по необходимости и по влечению приходится заниматься этой работой . И мне здорово помагает такое видео . Спасибо.

Я тоже благодарю вас. Я тоже не плотник. Но мне нравится иметь дело с этими вещами.

[@BigMikeDaGr8]

Not only is this design genius, you make the plans free, you're not trying to sell me anything or start a tv show, LOL... PERFECT VIDEO!!! Thank you!

Thank you very much for your nice comment. You already know that you can find PDF plans in the description section of all my videos. Greetings, respects..

[@АлексБеляев-з4й]

Еще и еще раз сердечное СПАСИБО за отличные ролики! Я пенсионер и покупать магазинную оснастку для работы не могу - очень дорого. А благодаря ВАМ потихоньку делаю по дому и себе, и дочке с внуками много полезных вещей. Спасибо Вам, добрый, хороший человек!

Я так рад. Большое вам спасибо. За ваш интерес и приятный комментарий ... Я осознал некоторые свои ошибки в отношении безопасной работы. Пожалуйста, берегите себя во время работы. Я желаю тебе хорошего дня

[@askwara]

Perfect project! I like the idea that the saw tray is not fixed to the saw base so that you can put it in and out in an instant, when needed. Im going to make exactly same one for my self. Thank you for sharing!!!

Hello. I am so glad you liked it. I chose this method because I thought like you. Thank you for your interest and comment.

[@skm7812]

I just made one for my circular saw. It has made the circular saw a more effective tool. Thank you for sharing your thoughtful design. It was great not to modify the saw to have this guide.

I try to make designs as much as I can without drilling holes or adding anything to the tools. Thank you for your interest. Greetings from Turkey 👍

[@whomadethatsaltysoup]

Brilliant, cheap solution to getting straight cuts with a circular saw. Laminate flooring is a very flat and stable material to use. Thanks for sharing.

Hello. I am very pleased. As you said, it's a cheap and effective solution. One feature of this app is that there are no parts that need to be attached to the saw. Thank you for your interest and comment.

[@gunadil]

Tutorial yg sangat berguna disertai dengan file pdf 👍

Saya senang Anda menyukainya. Anda dapat menemukan paket PDF di bagian deskripsi semua video saya. Terima kasih atas minat Anda 👍

[@asderven]

Thank you very much for these videos on rip cut and cross cut for circular saw. I was thinking of buying a circular saw to make boxes and other things. But I was scared of how hard it would be to do straight cuts at 90 degrees. You solved a big problem for me. I will make a video with your plans and link you in it, in 1~2 months. If I have any questions, I will post them here. I'll make something similar for my router as well for a planing sled to make the top surface flat.

Hello there. First of all, thank you for your interest. The reason why I made these tools was the need for straight cutting. This was a really important and big problem. One tool I made became a cutting bench for another. I've made my workshop quite a tool holder. My goal is not just to make tools. Then I'm thinking of making some items for my house using these tools. Please keep following me and don't forget to activate the bell notifications.

[@Mirpurmad]

this design is complicated but much better than any design for a circular guide to cut vertically.. I will give this a go

Thank you very much. I'm glad you liked it.

[@rdsamsterdam6430]

Those "cut in half" holes are a genius solution. Bravo , very inspiring to make one my own because I have a circular saw without a guidetrack 🙋

Hello. Thanks. I'm glad you liked it. You know you can find PDF plans in all my videos, right?

[@hectorgrande8000]

What are the cut holes for? I was trying not to have to ask didn’t want to come off sounding dumb but for the life of me I can’t figure it out.

[@rdsamsterdam6430]

@@hectorgrande8000 The half holes are made so you can lay the sawguide on your marked line. The edges of the half holes are the guidepoints to see if you are exactly on the marked line.

[@arel4333]

@@rdsamsterdam6430thank you for the explanation. I was wondering about it as well. Brilliant idea btw… never thought of that.

[@lynardburt5992]

I have looked at several track saw units. Yours was the better or best of them. I looked at 4, and yours was detailed and done with a lot of thought. Thank you for PDF for how to…

I thank you too. For your interest and nice comment. You can find the measurements in PDF format in all my videos. I wish you healthy days

[@hasansarac1595]

Bu alanda onlarca yabancı ve yerli videoları izlemiş birisi olarak, yaptığınız iş mükemmel ve takdire şayan. İnşallah kanalınız daha da büyür ve çok kimselere ulaşırsınız..

Çok teşekkür ederim Hasan bey. Doğrusu kendi vatandaşımdan gelen bu gibi mesajlar motivasyonumu daha çok artırıyor. Bütün videolarımda PDF planları bulabileceğinizi bildiğinizi düşünüyorum ama yine de hatırlatmak istedim. Hayırlı Ramazanlar

[@hasansarac1595]

​@ Kullanmış olduğunuz alüminyum profilleri almak istediğimizde nasıl temin edebiliriz? Belirli bir adı vs var mı acaba? İnternetten araştırdığımda karşıma birden fazla şekil model çıkıyor..

Kullandığım profil 5x25mm boyutlarında C profil olarak geçer. Ankara'da Kurtoğlu Alüminyum isimli firmadan aldım. İnternetten numarasını bulabilirsiniz. İsterseniz arayıp sorun. Başka bir izleyicimiz kargo ile gönderdiklerini söylemişti. Yaşadığınız yerde de sadece alüminyum satan mağazalarda bulunabilir.

[@hasansarac1595]

@ Çok teşekkür ederim bu ayrıntılı ve yönlendirici cevabınız için.

@@hasansarac1595 Ben de teşekkür ederim Hasan bey. Kolay gelsin 👍

[@ИгорьИванов-е6у]

Молодец! Спасибо за идею "каретки", удобно, что к пиле не надо направляющие прикручивать, потом откручивать.

То же. Это действительно обеспечивает большое удобство. Спасибо за ваш комментарий и интерес.

[@ВладимирСавенко-з1ф]

да, это правильно подмечено- тут самая правильная и ценная идея- это "каретка", именно это очень удобно

[@woodywood1951]

every thing you create is simple and very efficient. And it is why it is so efficient and so good, you are one of the best DYI ! And I mean it!!!! I like your KZbin channel!

Thank you for your nice and motivating comment. I will post a new video today. I think you will like it too. Don't forget to turn on bell notifications. have a nice day

[@lesblack413]

Possibly one of the best I have seen. Seems a lot of screws holding parts together - maybe they are necessary. Sight holes are a great idea - not sure if you would get tear out cutting across grain in plywood? Thanks for presenting this video. Cheers from Queensland Australia.

I thank you too. I overused the screws for stability and to prevent flexing. It is one of the tools that I use very efficiently.

[@kchassa_]

​@ your Project is miles away othsr users, who user 2 or 3 screws to fx. Thanks for share

I thank you too. Greetings from Turkey 👍

I thank you too. Greetings from Turkey 👍

[@gandziuc]

Спасибо большое! Очень просто и надёжно. Я хочу распилить мдф щиты для того чтобы собрать кухню. Благодаря Вашему видео у меня это получится проще и точнее. Спасибо!!!

И тебе спасибо. Рад, что смог тебе помочь.

[@davidbrotherson933]

This is a great design- definitely one of the best I've seen. Not complicated, and well worth taking the time to make. Great video.

Thank you so much. I'm glad you liked it. You can find detailed measurements in the description section of the video 👍

[@variostutos]

I was thinking of another slightly more complex design, but yours' simplicity wins all the prizes. Congratulations, excellent work. Thanks for sharing, greetings from Argentina.

Thank you very much. I'm glad you liked it. It is really good to use without interfering with the circular saw.

[@jaydee3730]

Great design, good job! One suggestion...instead of sandpaper, try using the foam rubber mat that you get for the bottom of toolbox drawers, it tends to grip a lot better and doesn't leave sandpaper marks on your wood finish :)

Thank you so much. Your recommendation is an excellent idea. Honestly, it never occurred to me.

[@angelomastrandrea867]

@ Jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj

[@HepauDK]

Unless you use the tracks for constructional lumber where looks aren't that important, skip the ø25 notches. Every time you reach a notch, you will get tear-out on the upper side. The edge itself acts as both as an anti-splinter guard and a reference, just put the edge on the line. Make sure your blade is square to the sole *before* plunge-cutting the runner and trimming the rail edge. ;) And make sure your square is actually square when making the runner, as the saw blade needs to be 100% parallel to the guide rail to avoid pinching the blade. I bought one of those small 85mm Worx saws some years back, and ran it against a guide edge. The blade was 't even fully int the workpiece when the blade started to pinch, and the blade warped. Turnex out that the sole was twisted a bit compared to the blade, so the blade entered at a slight angle. There were no way of adjusting it other than brute force, so I stopped using it and bought a 12V Bosch instead. The bosch doesn't cut as deep, but I have a proper circular saw for that (Bosch GKS 18V-Li including OEM tracks).

Everything you wrote is absolutely correct. It's like an instruction manual for a circular saw manual. Only 25mm notches don't splinter that much. Of course, you can say that if the knife is too old. However, since the sandpaper attached to the bottom also makes some height, even if there is no notch, the event you say may occur. But I didn't experience any discomfort. Thank you for your interest and I hope you continue to follow me.

[@robinred1851]

Yes, that Bosch works for me to. Excellent stuff for little money.

[@_wormlet]

"And make sure your square is actually square when making the runner, as the saw blade needs to be 100% parallel to the guide rail to avoid pinching the blade." Did he not do that? How should it be done differently?

[@aleksandera9815]

@ You also need to make sure that the disk in the raised state is in the same plane as in the lowered one.

[@robertjurek3053]

Many thanks, long time I was looking for easy guide like your one, I got lot of floor panels which I can use for this. Thank you very much.

Thank you very much for liking and writing a nice comment. You can find PDF plans in the description section of all my videos. Please don't forget to subscribe to my channel 👍

[@robertjurek3053]

Done, I need to check all your videos now 😁

👍😀

[@andreibootrin]

Большое спасибо👍Отличная идея с соединением ламината для увеличения длины😏

Я тоже благодарю вас. Мне нравится использовать ламинат. слияние очень хорошее и гладкое. Я использовал ламинат во многих проектах.

[@gareng5599]

Thank you I will imitate your design circular saw guide. I saw your video from Java-Indonesia.

Thank you for your interest. It's a really useful tool. I wish you healthy days...

[@gareng5599]

@ you're welcome.🙏🙏🙏

[@tungaozel]

Paylaşımların için teşekkür ederim. Özellikle de planları da bizlere sunduğun için ayrıca tebrik ediyorum.

Ben de size teşekkür ederim Alper bey. Bütün videolarımda ölçüleri açıklama bölümünde bulabilirsiniz. Hayırlı geceler

[@hitoyomi-bx4fj]

Bizimle kibarca iletişime geçtiğiniz için teşekkür ederiz Videonuzu ileride görmek için sabırsızlanıyorum, desteğiniz için teşekkür ederim.

Ben de teşekkür ederim 👍

[@rocsta2010]

Foi o melhor projeto de guia para Serra circular que eu já vi, parabéns!

Muito obrigado. Estou feliz que você gosta. Você pode baixar as dimensões para este projeto e meus outros projetos na seção de descrição.

[@pierrelouisregaignon6505]

Merci pour l'idée. C'est vraiment génial. Quand on voit le prix des rails dans le commerce. Je m'y mets aujourd'hui.

Merci. C'est vraiment abordable et très utile. Grâce au plateau, vous n'avez pas besoin d'attacher quoi que ce soit à votre scie.

[@samidemirci8009]

25 mm lik aliminyum kanallı profilleri kullanmak şart değil gibi çalışma prensibinde.Onun yerine laminant parke kullanılabilinir gibi geldi bana.Güzel fikir,sağolun.

Merhaba. Aynen Sami bey. Ben de aslında öyle yapmayı düşünmüştüm ama o sırada ince çıta kesebilmek için uygun makinem yoktu... İlginiz ve yorumunuz için teşekkür ederim 👍

[@DomDemolition737]

This is exactly what I am looking for, gonna build one for myself these days... Thank you very much! Çok teşekkür ederim

I thank you too. I'm glad you liked it. I would like to remind you that you can find the PDF plans in the description section of all videos.

[@rifatsaridag2618]

İzlediğim en yalın en kolay uygulamalı ve en; tatil fayda sağlayan klavuz çalışması olmuş. Eline emeğine teşekür ederim

Teşekkür ederim Rıfat bey. Begenmenize sevindim. Ölçüleri açıklama bölümünde bulabilirsiniz. Hayırlı akşamlar

[@haryfbowo4632]

Pekerjaan yang sangat bagus.. salam dari Indonesia

Terima kasih banyak. Aku senang kau menyukainya. Salam dari Turki 👍

[@armandsan5969]

Muy buen video y sobretodo Gracias por el pdf, hay muchos proyectos que nos dan una idea pero no mucha información, pero con tu pdf, esta de lujo Gracias y Saludos

Intento compartir medidas en todos mis videos. Gracias por su atención

[@evinparkyonetim1469]

Ellerine Sağlık Kardeşim Seni gördükçe hevesim artıyor. Allah Razı Olsun.

Çok teşekkür ederim. Kendi yaptığım aletleri kullanmayı seviyorum

[@nagendravc]

So far, the best guide I've seen

Thank you so much. Your comment made me very happy. I recommend you to watch my other videos as well. I wish you healthy days.

[@jomaragosita6518]

Yes i agree and i will copy this tks.

[@hasancemreok2597]

That’s amazing job. I’m not sure if it can be advanced to support angled cuts. Maybe v2 of this video will show us? :)

Hello. First of all, thank you... It can be made suitable for angled cutting, but the cutting point will change. This can make it difficult to use

[@elcura76]

Buenas, buen video y muy ilustrativo. Una consulta, qué es esa plancha celeste que pones como base para realizar los cortes, me parece que es como una espuma o algo similar. Desde ya gracias por la información.

Hola. Primero que nada, me gustaría agradecerle mucho. Como dijiste, el material azul que usé es espuma (espuma de poliestireno). Se utiliza como material aislante en la construcción.

[@rafaellarenas2331]

Excelente Murat un trabajo bien realizado gracias por compartir tus conocimientos...el conocimiento es libertad..🎉

Gracias también. Me alegra que te guste. Ya sabes que puedes encontrar planos en PDF en la sección de descripción de todos mis vídeos...

[@viktormakarenko2448]

Пожалуй самый простой вариант из всех что видел Оригинальное решение без переделки самой пилы

Как ты говорил. Я не хотел добавлять в пилу какие-либо детали. Очень удобно пользоваться. Спасибо за интерес и комментарий.

[@FantaBH]

Many other things on your channel I could see all around the internet, even a few of them I made for myself but this guide so far never seen and it looks so useful and great, so most likely will copy them as I do not see atm any possible improvements to your projects so it will be just copied. Thank you, you got me as your new subscriber.

I thank you too. I just saw your comment because youtube posted it to the ones that need to be reviewed. Sorry for the late response.

[@FantaBH]

@ it's no problem, not at all. Most likely you have settings that posts go there before posted but whatever , thank you and see ya again.

[@joseluisobispogarcia4012]

Lo mejor de lo mejor gracias x compartir tus conocimiento es la mejor guia q he visto hasta el momento. Gracias mil Un suscriptor mas a tu pagina

Estoy tan contenta de que te haya gustado. Puedes encontrar las medidas en la sección de descripción de todos los videos. Gracias

[@dw1hkdavidtkwong]

This so far is the best version I have seen so far.. Thank you for sharing your idea and tips.

I thank you too. You can find PDF plans in all my videos in the description 👍

[@фаисгайсин-ч2ж]

Самый лучший вариант! Спасибо, Мастер!

Большое спасибо. Я рад, что тебе понравилось. Пожалуйста, продолжайте следить за мной

[@фаисгайсин-ч2ж]

@ Обязательно, буду следить!

Спасибо ... 👍

[@EvgeniyMind]

@ что за профиль используете?

Привет. Я использую алюминиевый профиль, называемый С-образным профилем. Если этот профиль не найден, его можно заменить на аналогичный. или ламинат можно использовать, нарезав тонкие рейки.

[@giulianomarco7381]

Fantastic! by far the best saw guide, period.

Thank you so much. I'm glad you like it 👍

[@Sceme1991]

I did a very similar one but with just the laminate planks screwed together and no track or a sled. Seems to work well enough when I just keep pressure on the guide rail. Need to do some kind of rubberized underside too.

The sandpaper on the bottom works very well. There is no need to cover it completely... thank you for your interest.

[@Sceme1991]

@ Yeah I was thinking of grip tape with similar texture to sandpaper but sometimes I need to cut things like kitchen cabinet doors so I need something that wont scratch the surface.

You're right about that. Sanding can be harmful to coated covers. In this case, materials such as rubber are better.

[@woody1380]

Would it slide more easily if the boards were used upside down? Most laminate flooring has a texture to the display side and a very smooth underside. I am going to make a guide like yours so will try out using the boards upside down.

Hello. I think just do it the way I use it. The coating of the upper section is stronger and more slippery. You can test this by sliding two plates over each other.

[@marylisemosca9201]

C'est vraiment génial, félicitation.

Merci beaucoup. Je vous rappelle que vous pouvez retrouver les plans PDF dans la partie description de toutes mes vidéos. N'oubliez pas non plus de vous abonner à ma chaîne. Bonjour.

[@keupondestroy911]

Encore merci beaucoup pour les vidéos et les plans

Merci encore aussi. Salutations de la Turquie

[@albertoalvarez8366]

At last, a track guide easy to make! You have got a new subscriber.

Thank you. I'm glad you like it. It is really useful

[@mykolashatkovskyi576]

Great video, great channel! I wonder, how I didn't meet this channel before?! Murat, thank you for such a quality and interesting content. Btw, I have few old wide-n-long laminate boards - so, adding these saw guides a into my todo list.

First of all, thank you very much. This guide was one of the first equipment I made and I still use it. Thanks to this guide, I was able to make other tools... I would like to remind you that you can find PDF plans in all my videos. Greetings from Turkey

[@Goedeke_Michel]

Really well done.

Thank you very much. I would like to remind you that you can find PDF plans in the description section of all my videos 👍

[@logicMan64]

Very good job , thank you very much for sharing your knowledge

Thank you too 👍

[@MalcolmX22]

We made these on the job 50 years ago.

So these devices are still being used. Technology has not advanced enough in this regard. Thank you for your interest 👍

[@vyacheslavre3818]

Блестяще! Всё просто и наглядно!

Большое спасибо. Я рада что тебе нравиться. 👍👍👍

[@คนในสวน-ค5ฦ]

Thanks again for your 3D Model and dwg. I really don't understand what the reason to have a holes 25 mm.on the base part?????

Hello. These holes were made to easily see the dimension line drawn on the piece to be cut. You can do without it, but they really work.

[@คนในสวน-ค5ฦ]

Thanks for your repied, I got it, have a good one,,, I am from Thailand😍👍👍

Greetings to Thailand 👍

[@peterbernardthompson]

Thank you! It looks perfect to me. I'll follow your instructions.

Thank you too. This was the first proper cutting tool I ever made and I still use it. Later, I cut the necessary parts for the other tools I made using this guide. I made another guide to make cuts longer than 2 meters. You can find the video on my channel. I would also like to remind you that you can find the PDF plans in the description section of all my videos. Greetings from Turkey 👍

[@peterbernardthompson]

@ yes I have downloaded the pdf plans! Perfect! I'll have a look at your guide for longer cuts.

👍👍👍

[@CKKoh-iy9wg]

This is the best DIY track saw. Brilliant idea to use laminate. One question though, how do you get it to slide so easily?

Firstly, thank you. I didn't do anything extra for it to slide easily. So I didn't take anything. Actually, that's why I used laminate flooring. So easy sliding. Thanks to the coating, it glides very well.

[@muhtarkunakov452]

Отличный проект, ламинат очень скользкий , может не все виды но у меня дома точно такой😂, я несколько раз падал при резких движениях на чистом ламинате без коврового покрытия, автору успехов, это самый лучший что я нашел, также ламинат очень термо и влаго устойчив против температурного расширения или сжатия.

[@himmetcicek2229]

Kanalınızı buğün keşfettim Elinize sağlık. Evde bulunabilecek malzeme dar imkanlarla kolayca yapılabilir çözümler sunuyorsunuz çok hoşuma gitti. Umarım videoların devamı gelir.

Çok teşekkür ederim. Dediğiniz gibi herkesin ulasabilecegi, elinde olmasa bile çok para harcamadan satın alabileceği malzemeleri kullanmaya çalışıyorum. Bunun yanında yaptığım aletleri aktif olarak kullanıyorum. Elimden geldiğince aklımdaki projelerin videolarını koymaya çalışacağım. İlginiz için tekrar teşekkür ederim...

[@ЕвгенийГорбачев-е3ц]

Прекрасно, руки золотые, как все просто.

Большое спасибо. Рада что тебе понравилось. Напоминаю, что планы в формате PDF вы можете найти во всех моих видео в разделе описания. Привет из Турции 👍

[@ralarena]

Excelente trabajo muy creativo gracias

Gracias también. Me alegro que te haya gustado 👍

[@MrPatdeeee]

Incredibly Awesome, kind Sir!

Thank you so much 👍

[@MrPatdeeee]

@ ❤

Greetings from Turkey 👍

[@valveman12]

Well done!

Thank you so much 👍

[@guyh.4553]

Wouldn't a lip on the front that barely fits over the front be good just to help hold the saw in place be better? And it seems like the half holes should be on the outside (non sawing) facefor clamping. I guess we can modify it as we please. Nice build

Hello. Semicircular holes were made to easily see the measurement line drawn on the piece to be cut. On the other hand, I couldn't understand what you were saying about keeping the saw in place. Can you explain this a little bit?

[@guyh.4553]

@ I never thought about seeing the line. Great idea. As for the lip, at the front end of your sled or tray (can't remember what you called it) where you are moving forward cutting, putting a top or lip, something, putting a piece of wood on the top to lock the shoe/base into the tray. Hope that makes better sense

I think I understand this time... Did you mean a piece to prevent the saw from coming off easily?

[@ronaldososa1975]

Excelente!!!! Saludos desde Argentina

[@alexanderasi316]

Very effective clrcular guide.

thank you so much. I'm glad you think so.

[@ЕвгенийГорбачев-е3ц]

Работа, для распиловки размеров материалов, просто,клас. Ролик класный спасибо.

Большое спасибо. Вы знаете, что вы можете найти планы в формате PDF в разделе описания всех моих видео, верно?

[@ЕмилПетков-б5э]

Hello I looked at many similar projects, but I liked yours the most. There is something I don't understand. Why do you make 25mm holes where the disc moves? What is their purpose and will there be a problem if they are not there?

Hello. Firstly, thank you. 25mm holes were made to easily see the dimension line drawn on the part to be cut. even if it doesn't. but they work

[@josealejandroapezteguia2621]

Muy buen video, claro y muy prolijo: Agradezco que lo compartas. Gracias

Gracias a ti también. Me alegro de que te guste. Puedes encontrar las medidas en la sección de descripción de todos mis videos. que tenga un lindo día

[@александрмалахов-э3ъ]

СПАСИБО КЛАСС КЛАСС КЛАСС ПРОСТО ПОЛЕЗНО БЛАГОДАРЮ ЗА ВАШ ТРУД

Я тоже вам большое спасибо. 👍

[@VallartaOffroad]

Thanks, another excellent project! I live in a very humid climate - what are you using to seal the "end grain" of the MDF? You use a lot of it, so you have probably found a good solution. Thanks again for your videos

Hello. I thank you too. Honestly, where I live is pretty low humidity. However, I do not think that MDF plates will be damaged unless exposed to water for a long time. I do not prefer to use MDF boards in case of vertical screw throwing or in places that will carry loads. You must have seen in my videos, for example, if there is a piece in which I will see a nut, I use plywood or hornbeam. I have been using the products I have made for a long time and believe me, I have never had a miter break.

[@Ancistruscz]

Brilliant idea and tutorial

Thank you so much. I am glad you like it. PDF plan is in the description section

[@RianvanWyk]

Just what i was looking for. Great design.

Thank you very much. I'm glad you liked it. You know that you can find PDF plans in the description section of all my videos. Greetings from Turkey 👍

[@leandersmith6184]

The idea is perfect, maybe a little bit to perfect as i think of. You can skip the holes, the aluminum and the jig the saw is placed in. This is a bit overcomplicated and there is no reason to have these items. I love the idea of the laminated floor boards they are nice and thin and bendable. So get a piece of the wide lamina, glue and tack and screw another smaller piece of lamina say 3 cm (1 1/2 inches) wide and place this piece in length on the first piece by keeping the ends together. Take your circle saw and guide it to the smaller piece cutting the wider piece under it. that's it, the wider piece is now your measurement for further cuts. thanks for sharing

Hello. Thank you for your interest. I chose this method because I did not want to attach or screw any attachments to the saw. I also love using laminate flooring. I have used it in many projects. I wish you a good day

[@raksaartgallery2991]

It's cool..! 👍👍👍 Grateeng from Indonesia...! 🙏🙏🙏

Thank you very much. I am glad you like it 👍

[@GURALEJ]

OK. Praca wykonana profesjonalnie.

Dziękuję bardzo. Możesz pobrać plany PDF z sekcji opisu.

Ellerine sağlık kardeşim çok güzel kullanışlı bir aparat olmuş kanalında güzel projeler var hepsini fırsat buldukca izleyeceğim

Çok teşekkürler. Projelerimi beğenmenize sevindim. Takip etmekten vazgeçmeyin lütfen

@ Tabi ki emek verilerek yapılan işleri begenmemek olmaz kanalınızı takip edeceğim başarılı dilerim abone olup bildirimleri açıyorum kendinize iyi bakın görüşmek üzere sağlıcakla kalın selamlar

İyi dilekleriniz için tekrar teşekkür ederim. Size de sağlıklı günler dilerim.

[@АликГусейнов-э4з]

Super!!! Просто конфетка (ШЕМКИР ДЗЕГАМ)💥🇦🇿🇦🇿🇦🇿

Большое спасибо 👍

[@wilkbor]

Thank you for the plans and for the video. The PDF calls for 25 mm semi-circles placed every 150 mm along the cutting edge of the guide. What is the purpose of those semi-circles?

Hello there. First of all, thank you for your interest. The half circles were made to easily see the dimension line drawn on the part to be cut...

[@harpitap]

@ I was asking myself the same question. Thanks for the answer, VERY SMART⭐⭐⭐

[@njbaquatics4827]

Thanks for asking this I was wondering exactly the same thing I’ve got a bit of all the laminar lying around I think I’m gonna give this a go

👍

[@wlad5329]

​@привет.Подскажи пожалуйста-там где"окошки 25мм"не колет материал?

[@ЕвгенийПанин-у7й]

Самая лучшая идея 👍👍👍🙂

Большое спасибо 👍

[@maalroam]

Gracias por compartir ideas y tu experiencia, saludos.

Gracias por su interés. Estoy muy feliz de que te haya gustado. Por favor, continúe siguiéndome.

[@ОлегКрым-щ7о]

Качественно сделано ,хорошая идея

Большое спасибо. Я рада, что тебе нравится 👍

[@ВалерийРемизов-е2ш]

Все гениальное просто

Спасибо 👍

[@ЕвгенийГорбачев-е3ц]

Спасибл за ролик, все очеь просто и красива.

Я тоже благодарю вас. Рада что тебе понравилось. Напоминаю, что планы в формате PDF вы можете найти в разделе описания всех видео 👍

[@robertleoncio5832]

Really nice nand simple. Just wanat to ask what are the half curves along the track for? Thanks

Hi. Thank you so much. Half circles are made in order to easily see the dimension line on the piece to be cut. You may not, but it really works

[@nikolasshev]

Спасибо за ваши видео, мне нравятся ваши идеи! Напишите пожалуйста что это за голубая подложка на которой вы распиливаете? А также где вы такие низкие алюминиевые направляющие покупали 5 мм?

Привет. Во-первых, спасибо. Синие листы, которые я использую, представляют собой изоляционный материал, называемый пенополистиролом. Обычно используется для утепления пола. Его можно найти в строительных магазинах. Алюминиевые профили называются С-профилями. Купил в магазине алюминия. Вместо этой модели можно использовать другой профиль. Или можно использовать деревянные рейки

[@nikolasshev]

@ Спасибо!

[@edleysoares9589]

Best one I have seen

Thank you so much 👍

[@marcoantola6156]

Bel video, semplice, veloce ed economico 👍

Grazie molte. Sono felice che ti piaccia. Uno strumento davvero utile... continuate a seguirmi per favore

[@billyjay4672]

Nice job well worth the watch

Thank you. Honestly, I shot the video when I was a novice. A really useful tool. I'm glad you like it

[@dirinfo13]

Very good ! Where did you find such a flat aluminium guide, please?

Hello. First of all, thank you. I bought it from a store that sells aluminum profiles. It is called C profile. If you cannot find the same one, you can use another profile. The same dimensions are enough. By the way, you know that you can find PDF plans in the description section of all my videos, right?

[@Marco-ef5ns]

Gracias por compartir tu diseño

Gracias también 👍

[@SALOMANDRA87]

Отличный вариант! Подскажите какой клей используете для склейки двух отрезков ламинат?

Во-первых, спасибо. Рада что тебе понравилось. Я использую жидкий супер клей. Его можно найти в канцелярских магазинах и магазинах для рукоделия. Есть также гелеобразные этого клея, а рядом с гелевыми есть спрей, который позволяет ему быстро схватываться. Те, что я использую в жидкой консистенции, обеспечивают отличную адгезию к ламинированным поверхностям.

[@mohdazli9812]

Absolutely genius

Thank you so much. I recommend you to check out my other videos as well. I hope you like it.

[@melrosehawkins8294]

Good Lord. Enough screws in base?? Lol. Nice job on design.

Hello. You know, laminate is a material that is prone to warping. That's why I threw in a little too many screws. Thank you for your attention

[@olavwitte]

Simpel and perfect!

Thank you so much 👍

[@woodmaster21]

really good job ! Next step should be to protect yourself against the saw dust - I am quite sure you will find a solution 😂😂

Firstly, thank you. You are so right about this. A dust absorber is a must for the indoor environment

[@Roma-NN]

Отлично. Я только не понял предназначение полукруглых отверстий по краю шины..

Привет. Во-первых, спасибо. Отверстия, которые я сделал в форме полукруга, были сделаны для того, чтобы было легче видеть размерную линию, проведенную на разрезаемом материале.

[@lorenzolucio881]

Exelente aporte gracias gracias

Gracias. Me alegro de que te guste. Puede encontrar las dimensiones en los proyectos en la sección de descripción.

[@AlexStark80]

Thank you for such devices. What kind of glue do you use?

Hello. I thank you too. The Glue I use is super Glue. Here is the liquid consistency one I use. There is also a gel-like type that is frozen with an activator spray. You can find it in all construction stores. Also note that you can find PDF plans in the description section of my videos. have a nice day

Hello Mr. Alex. Please excuse me for making a new comeback. Could you send an e-mail to [e-mail]? Thanks