Homemade faceting machine 6. Experimental handpiece 2. Project suitable for learning gemstone faceting . Handpiece quite good is made of a little scrap material ...
Пікірлер: 71
@senengwatu4178 Жыл бұрын
You are awesome sir!! You make it looks simple and doable. I only make cab but after watching your channel I wanna learn to do faceting too. I'll make one of these in the future. Thanks for the idea sir.
@Liburni Жыл бұрын
thanks
@gaborgyulavari78982 жыл бұрын
Hey! Nice job my friend! You have only basic tools, but have an idea, and you made it! Congratulations!
@Liburni2 жыл бұрын
thank you very much, that the idea was as simple as possible, I have some more plans for simple handpieces that I will make in the next period
@bustergonad39752 жыл бұрын
Stunning hand piece. I am a Toolmaker, but with early hand tremors. I don't want sympathy but can you share some basic sizes and materials used. I am an excellent Wood and Stone letter engraver. My last before retiring before I have to is to do faceting. I have 200 cts of Garnet, tasvsorite and rough green stones. I'm joining a Lapiday club to learn, but as a Toolmaker who enjoys using old techniques in doing one off unusual repairs...clients have not had success elsewhere...I am referred as a last resort...he thinks differently !!! They say..I think the way a craftsman thinks. I also do Laser Welding so I have fine hand motor skills...but a developing tremor in my left hand...not the right. Can you help me out as one craftsman to another. I wish to make a celebration of life, study, success overseas in Architecture for my God Daughter. A ring with stones that are important to here. I wish to create that before I can't blow my nose anymore. Dementia when it sets in will spare me from remembering I didn't complete the task. Regards Mike
@Liburni2 жыл бұрын
@@bustergonad3975 Hi Mike I'm sorry to hear you have health problems, my health is even worse, I will not list my problems, I just want positive views of the future. That's why we chose a wonderful hobby - gems, a world of special beauty. Feel free to contact me on FB facebook.com/liburnidesign or at liburni.design@gmail.com I don’t have blueprints because I did everything from the material available in the workshop. Aluminum, wood, iron and the main dimensions are 18 x 11.5 cm. My experimental handpiece 1 is even easier to make and provides quite good features. I'll make some more super simple ones soon .... regards
@bandilla73172 жыл бұрын
very nice idea Thnks for sharing this information sir.
@Liburni2 жыл бұрын
thanks
@user-uk4yx8sr9g6 ай бұрын
@@Liburni I need this
@GilbertoPeraltaLapidacao2 жыл бұрын
Muito top amigo parabéns pelo seu trabalho muito interessante mesmo hein like
@ademulyana2292 жыл бұрын
Great...!!! 👍👍👍
@Liburni2 жыл бұрын
thanks Ade
@aklareborn1192 жыл бұрын
Cool..!
@GemLapidary2 жыл бұрын
Good Job
@Liburni2 жыл бұрын
thanks
@rufaelsolomon61842 жыл бұрын
good job
@jorgesucno97162 жыл бұрын
Gracias.gracias.gracias me alludo muchisimooooo
@robertorodrigues14682 жыл бұрын
Show 👏👏👏
@m.hoogenboom63172 жыл бұрын
Nice job!
@Liburni2 жыл бұрын
thanks
@VintageTimeGems2 жыл бұрын
Well done.
@Liburni2 жыл бұрын
Cliff thank you very much
@shaukathameen2808 Жыл бұрын
💯
@kerajinan2524 Жыл бұрын
mantab bro 👍
@riderscore10802 жыл бұрын
Best sir .. For many, you can sell, it's hard to get this holder...how much you sell..
@Liburni2 жыл бұрын
Thanks for the compliments and for watching the video. I am not selling, it was made only as an experiment, like two other experimental handpieces. They served me well for learning to cut gems. Then it was easy for me to switch to the diamond tang professional tool ....
@syahrilefindi2 жыл бұрын
Nice sir
@Liburni2 жыл бұрын
thanks
@Mohammad-zm8ff2 жыл бұрын
Hello you are very talented and I wonder that you made it. Do you have any idea for making a slicing machine? Thank you very much 🙏
@Liburni2 жыл бұрын
thank you very much, I hope my plan is to build a saw for stone but in the summer, ordinary for cutting smaller pieces. thanks for watching
@Mohammad-zm8ff2 жыл бұрын
@@Liburni thanks a lot🙌
2 жыл бұрын
Parece ótimo!
@Liburni2 жыл бұрын
thanks
@mahiatyn932 жыл бұрын
Works ;)
@Liburni2 жыл бұрын
of course it works :) thanks for watching
@jorgericardosucno2754Ай бұрын
FALTA EL PLATÓ ASCENSOR .DONDE SUBE ESTE BRAZO FACETRON
@LiburniАй бұрын
Nothing is missing, better watch the video, experiment only with plates
@sarisaringkalikottv951611 ай бұрын
what is the name of the wax sir that u use in ur dop stick..im ur subscriber have a good day ..thank u for yur reply
@Liburni11 ай бұрын
I use red wax. It is a wax that is also used for sealing doors or boxes. It is hard, brittle and has a higher temperature than other waxes. You can find it on ebay to buy under the name "dop wax". It comes in different colors that indicate the melting temperature, and they are all based on shellac. Thank you very much for following my channel. Best regards Predrag
@sarisaringkalikottv951611 ай бұрын
@@Liburni thank u very much idol..
@Liburni11 ай бұрын
@@sarisaringkalikottv9516 Thank you for the kind words.
@jonathanhilltop87862 жыл бұрын
i made 95% of those and it goes well. im stuck at those spring lock for the index gear, do you have any direction how to make it? thanks in advance
@Liburni2 жыл бұрын
Jonathan I made it from a piece of aluminum, if you give me a contact I can send you a few more photos.... liburni.design@gmail.com
@wellingtonbomfim7314 Жыл бұрын
Boa noite amigo Quanto custa
@Liburni Жыл бұрын
Wellington Bomfim , not for sale, I made only one piece for an experiment, thanks ...
@jorgesucno97162 жыл бұрын
Teacher good day ...Can you make lifting plate for the faceting arm...
@Liburni2 жыл бұрын
of course it can be done, but as this is just an experimental model then I adjusted the height by laying the boards and so I got different heights
@jorgesucno97162 жыл бұрын
@@Liburni tank very mush
@fanton777doy92 жыл бұрын
NICE HAND MADE tool 📏😵 WOOW ❗🙋👍
@Liburni2 жыл бұрын
thanks
@py2jpa307 Жыл бұрын
Hello I ask if you could send other index 32, 64, 72, 74, 80,88,120 Ola Pergunto se poderia enviar outros index 32, 64, 72, 74 ,80,88,120 73s
@Liburni Жыл бұрын
Sorry but this was just an experimental model, but you can draw the index yourself as you wish in one of the programs "CorelDraw" or similar. You can also use different materials and sizes. One day I want to make a Thai handpiece that has no index at all.Thanks for watching and commenting.
@Putra.Caruban.Nagari2 жыл бұрын
Can I ask for a schematic diagram please. thank you very much and sorry if my english is not good.
@lilissulistiani88732 жыл бұрын
Kalau pesen brapa itu om. 🙏
@Liburni2 жыл бұрын
sorry, it's not for sale, it's just one piece made for experiment
@mustafacandemir9084 Жыл бұрын
Bayım bana ölçüleri göndere bilirmisiniz.
@Liburni Жыл бұрын
Sorry, but I built this experimental handpiece without a blueprint
@jorgesucno97162 жыл бұрын
Maestro falta el plato asensor...para que se siente el braso facetador...gracias
@Liburni2 жыл бұрын
I'm sorry, I didn't understand you well, what's missing?(falta el plato asensor)?
@jorgesucno97162 жыл бұрын
Si falta el plato asendor
@kashifansari65347 ай бұрын
Price
@Liburni7 ай бұрын
NFS Not For Sale
@askndeniz5781 Жыл бұрын
Facet. How much?
@Liburni Жыл бұрын
Sorry, it's not for sale, I made it as an experiment, just one piece.
@askndeniz5781 Жыл бұрын
@@Liburni I wanted to get information from you about where I can get the facet arm.
@askndeniz5781 Жыл бұрын
@@Liburni Do you know how much facet processing cost?
@user-uk4yx8sr9gАй бұрын
Not real idea only dream
@LiburniАй бұрын
right, just a cheap simple experiment
@mohsinali12697 ай бұрын
Price
@mohsinali12697 ай бұрын
Sir, I want to buy this Tool. What is the price of this? And can you teach me to make this Tool?
@Liburni7 ай бұрын
@@mohsinali1269 This is not for sale, it is experimental