VEVOR Gem Faceting Machine Unboxing & First Impressions

In this video I unbox a new Vevor Gem Faceting Machine to see if the quality matches the price. I let you know if this is a good buy for someone entering the hobby. Come along and check it out.
THANKS FOR WATCHING!!
VEVOR Gem Faceting Machine:
US: s.vevor.com/bf...
CA: s.vevor.com/bf...
5% off code (Valid for all items): DISCOUNT23
A L L T H E R O C K H O U N D I N G L I F E L I N K S *
linktr.ee/rock...
E M A I L *
[e-mail]
E T S Y S T O R E *
rockhoundingli...
P L E A S E H E L P S U P P O R T O U R C H A N N E L *
Subscribe
Hit the thumbs up button on our videos
Turn on notifications (aka SMASH THAT BELL!!)
Leave a comment (We love answering all comments!!)
Share our videos
Follow us on our other social media accounts below for additional content
C H E C K O U T O U R O T H E R R O C K H O U N D I N G & L A P I D A R Y A D V E N T U R E S *
www.youtube.co....
kzbin.info....
kzbin.info....
kzbin.info....
kzbin.info....
kzbin.info....
H I G H L A N D P A R K L A P I D A R Y C O M P A N Y *
hplapidary.com/
Follow the link to the live sale where they sell exclusive Rockhounding Life rough rock
H I - T E C H D I A M O N D *
hitechdiamond....
Use 10% Discount Code: RHLIFE
C A B K I N G *
cabking.myshop...
Use 10% Discount Code: RHLIFE
NEED A TUMBLER?
T U M B L E B E E *
tumble-bee.com/
Use code RHLBEE for $10 off all tumblers.
Use code RHLIFE for 10% off all accessories.
A M A Z I N G R O C K H O U N D I N G & L A P I D A R Y C H A N N E L S *
@Marlaina Atkins
@Montana Rock Mom
@Gravel Bar Hopper
@Michigan Rocks
@KatyDid ROCKS!
@Currently Rockhounding
@Theo Kellison
@Agate Angler
@Agate Dad
@Natural Stones​
@World of Rock Hounds
@Elley Knows Rocks
@Ozone Fine Art-Ventures
#TheFinders​​​​​​​​​
M U S I C A L C R E D I T S * (in order of appearance)
Song: Papov
Musician: Yung Logos
#Vevor #vevordiyproject #gemfaceting

[@NickAcker2019]

Thank you for doing this product review. There's so many machines to choose from so it can get overwhelming. Also thank you for the bonus rocks you sent with the Agate sailboat. The boat is really awesome by the way❤

[@RockhoundingLife]

You are so welcome!

[@Mike-br8vb]

Awesome unboxing video! Thank you for explaining the faceting arms and the importance of the transfer jig.

[@lornetremblay2828]

Thanks for sharing. Looking forward to your facetting videos. I bought an old Fac-ette machine with all the accessories but I haven’t had a chance to use it yet. Used machines are hard to find in Canada but I got lucky. Interested to see how your new machine performs.

[@AngryTurtleGems]

I have been working on a kit to make this model fully functional and including all the missing equipment. Should launch in a couple weeks--faceting for under 500 all in. It is an incredible value for what it is, just needs a few more things

[@AngryTurtleGems]

If you would like one of these kits to try I will send you one

[@RockhoundingLife]

Definitley interested. You can email me at [e-mail]

[@AngryTurtleGems]

​@@RockhoundingLife thanks, just sent an email

[@hunteryoung1176]

I’m looking to find some replacement parts. Do you have any for sale?

[@AngryTurtleGems]

@@hunteryoung1176 which parts do you need?

[@d.b.sorensen827]

Ok I just got this machine for Christmas, have you located a good source of laps and discs to make it usable,looking forward to seeing your next video of using it ,mine will be used as a flat lap mostly so a good video of using it for cab making would really be nice. Keep up the good work,😊 ps I’m 72 retired disabled veteran looking at rocks as a hobby

[@RockhoundingLife]

I have a source for information and materials for you for this machine. Email me at [e-mail]

[@willorlyk5510]

Thank you so much. Helps me a lot 🙏🙏🙏

[@nathanrae1052]

I purchased a vevor gem machine recently as well. For it being an inexpensive 6” flat lap. The model I got was the one with a cast iron base. The one without any light and pump. Works well for a lap. You model came with a stop on the angle display. Mine did not and so I had the rig my own stop. Your model having forward/reverse with a speed control is nice. My model has no speed control. Just on/off. If you want to facet then your model makes more sense with speed controls. If you just want a cheap 6” flat lap then there is an even cheaper vevor model

[@RockhoundingLife]

Yes they have 3 or 4 differnt faceting machines. Thos one was the most expensove one so you can go even cheaper

[@DanAnello-jp7ej]

Can’t wait to see it in action!

[@krenkoz7029]

Hint. Buy "5/8ths inner diameter washers" for the mast to cut the lower heights like the 90 degree girdle cuts

[@griffinwhitener4259]

I know this video is older now. Is there a follow-up video I'm not able to find where this machine is being used to cut a stone?

[@RockhoundingLife]

Not yet but coming soon

[@KcpMedia]

Hey! did you ever get around to trying it? I'm still wanting to buy one, been waiting on your update! lol

[@RockhoundingLife]

Not yet! But coming soon!

[@guitarchitectural]

​@@RockhoundingLife no offense brother but you've been using that reply for months 😅 Let me ask a different question - if you got the extra parts and used it, did you like it? Any deal breakers? I need something to make small (1/2") discs with a beveled edge. If it can act as a flat lap that's even more perfect. So I'm keen to hear your thoughts in advance of the video!

[@terrydoucette6037]

Better than I expected

[@terrydoucette6037]

Great explanation J

[@deweyhall]

Is there a second part to this video? In the comments you say "soon", but those remarks are all 6+ months old?

[@RockhoundingLife]

Not yet. Definitely coming in the next few months!

[@d.b.sorensen5464]

It looks like there is a bit of extra room in the bowl will this hold an 8 inch wheel or a 7 maybe for cabbing

[@RockhoundingLife]

No. It is strictly a 6" machine but can still be used for cabbing with 6" discs.

[@largent45]

Thats too bad that theydidnt include a xfer jig and the other lap discs is common. Most of the jigs you have there seem really big too and you may want to invest in some smaller dop sticks. Not everyone can afford to facet that large of a gemstone! Lol. For the most part what ice seen and heard from other faceters you can cut with the 600 disk and you need the type of polishing disks that you use for each different kind of material! Some have used a cdrom for polishing and others use a tin or a copper disk. Which have to be conditioned and you will need polishing paste or the tppye and grade of diamond powder you need for polishing and the grade of machine oil you need to suspend it in. Some use saewung machine oil. I suggest watching a few if justin k prims videos! He really explanes his process well for the beginner ad well as the more advanced faceter. Congrats on the faceting machine! It looks like a decent machine for the price! And usually they are priced way out if new want to be faceters price range. Everything is in this hobby! Being handicapped now i xant go collect material anymore and i can't polish rocks either! So maybe i can facet gemstones thrn! And that is an entry level price that many can afford. Not me of course but nany others! Lol! Thanks Jason! ❤

[@raymondloomer5405]

Interesting. I have made my own dop transfer jig out of tongue and groove oak flooring. I cut a notch out of the groove side and used elastic bands and that worked just fine. I don't see a micro adjustment on the pole. That is a problem. Probably a pipe with a nut on the end (finer the thread the better) to sit on the collet would be a very big help in mirco adjusting during polishing. I grew up just down the road from where you are now. I try to get out for a little rockhounding trip each time I get down that way. Have fun. = Ray

[@RockhoundingLife]

That's interesting. They are expensive. I found one on amazon that was pretty affordable. There is a micro adjustment on the mast. I didn't do a good job of going into detail

[@raymondloomer5405]

@@RockhoundingLifeCool. The other question I might have is can that machine approach the girdle of a faceted stone without modification.

[@deweyhall]

Did you ever facet some gems with this? Did you try Stephen's "Angry Turtle" upgrade kit? Eagerly awaiting the follow-up!

[@RockhoundingLife]

Coming soon!

[@Rygoat]

I'm a little annoyed that the Australian vevor site doesnt have these, would be a great starter bit of kit.

[@RockhoundingLife]

Its not useable as it is coming from Vevor. There is a kit you can buy that upgrades it to useable.

[@isaaccp25]

Where can I find the next video

[@RockhoundingLife]

Haven't made it yet. Coming in the next couple of months

[@isaaccp25]

@@RockhoundingLife sounds good

[@jonasbeyer8753]

Thanks for the awesome video! Looking forward to the next one

[@internetjunky4327]

Hi! I haven't seen any other videos of you using this machine, did you get around to trying it?

[@RockhoundingLife]

Not yet. I had a kit arrive that fixes a lot of the issues. I am testing it and will be doing a video shortly on the improvements. Probably towards the end of the summer.

[@deweyhall]

@@RockhoundingLife Any updates?

[@macgyverb]

Looking forward to the next video on this any idea when you will have it out?

[@danhughes6373]

Facetnating. Too bad it’s made off shore, would be so nice to see a Canadian manufacturer. I look forward to seeing the results!

[@jessybrown7108]

Thanks my friend. I was actually thinking to buy one very soon. I am new too and retired from my job, so why not make a nice precision hobby out of this.

[@jaymortensen642]

I bought the same machine its a good price but to facet your going to have to do allot of work to it nothing is machined for accuracy. I found the table top was concave with one side of the tower track higher than the other also the base of the tower is not machined so I surface ground the table and base so the tower runs 90 degrees on the whole track, the table and disc are not parallel so I shimmed the motor it would have been nice if Vevor drilled and tapped holes so you could have opposing screws to the motor screws that way you could adjust for level. One issue I have not been able to fix is the disc has a wobble not that you can see buy can be felt with a dop in the quill, it appears to stem from the collar on the motor it has 1 set screw believe two set screws may fix it. Also the aluminum disc need to be sanded level. There is play in the sleeve of the quill that transmits to the end of the dop at about 1 to 2 mm that I put hooks on the quill with a rubber band that will hook to the base of the tower and keep the quill tight to the bottom of the play. I found the protractor pretty useless and bought a digital angle meter there is also a problem with the fine tune it does not secure the quill so when the stone is against the disc the quill can lift off the fine tune which causes a bevel to be ground so I use a rubber band to pull them together. The height adjust on the tower I had to run upside down to the numbers for various reasons which you will find out. I made a sleeve to go in between the degree wheel and pointer so I can spin the quill 360 degrees. I also use shims on the bottom of the tower for the girdle grinds the adjuster is to large to allow for girdle grinding. I also put another cooling fan in because the unit gets really hot. There are other things but I am getting long winded.

[@RockhoundingLife]

I found a guy on the internet that makes kits for this machine which corrects a lot of these issues and more and allows you to cut a stone. He is sending me one and i am going to make a video on it.

[@jaymortensen642]

@@RockhoundingLife Nice, I'm sure with a little time and money it will be ok for simpler grinds { under 50 or so facets} and still way cheaper than better quality machines. I have not tested mine with the corrections I made on any gems stones just some rocks and its grinding fairly well but still has a few issues. I don't want to waste any gem stones until I am sure it will grind decent.

[@kyle08261984]

I also purchased the more expensive version off of Amazon and at first glance I thought I got a good deal. Until I went to use it and found the adapter plate was only screwed on with one allen bolt making leveling the base for the master lap high on one side. Also the mast was not truly flat so when the arm is moved to the outside edge of the disc it drops the stone deeper into the disc. One more was that the adjuster for the mast could not go down far enough to cut a girdle facet making the set up useless. The unit is now sitting on the floor and I'm about to unbox a new omni patriot tomorrow.

[@cookerinco3766]

Did you really think it would come with a full set of discs and doors sticks ?? ?? ??

[@RockhoundingLife]

Im not going to lie..... I thought it might.

[@TiredOldMann]

No video using the machine . Is it belt drive ? Is it junk ?

[@RockhoundingLife]

Couldn't use the machine due to missing parts.

[@sandmaker]

It's a shame it didn't come with all you need to start right away, bummer. It looks solid. Thanks

[@kingdarkem]

I been wanting to get into gem faceting too... But i hear a lot of bad things about these cheaper machines when it comes to faceting

[@RockhoundingLife]

I'll be giving a full review of the use of the machine for faceting from a beginners perspective at the end of summer.

[@kingdarkem]

@@RockhoundingLife nice look forward to it. Lot of garnet and stuff locally in the river and jade...occational diamond mixed in

[@Kamilpodbeskidzie]

Very interesting video, do you think it is possible to grind small stones on this? Like 3-5 mm? Regards

[@RockhoundingLife]

Yes for sure!

[@lianeisme]

Did you ever cut a stone

[@RockhoundingLife]

Not yet but I will be very soon

[@lianeisme]

@@RockhoundingLife oh good I have been looking forward to it

[@tucabrasil]

Gostei muito dessa máquina , como faço para comprar, será que fica muito caro para enviar para o Brasil 🇧🇷 Eu tenho interesse em comprar

[@RockhoundingLife]

Its around $300 USD. Im sure they ship to Brazil

[@benjamindejonge3624]

I don’t know why this exactly one runs for 500€ in Europe meaning double expensive

[@johnsaucerhunter]

Well... I'm going to hold off any real comment till I see how it works out for you. I see (and hear) too many folks just all over something, or do a "Kill the messenger" scenario before anyone has truly spent some time with a 'unknown budget' device.