I made the cogwheel an alternative method, after which he successfully took his place to work in the mechanism. Here there is a method of homemade silicone, it is gelatin + glycerin in a ratio of 1: 1.
Пікірлер: 1 600
@gordoncouger96483 жыл бұрын
I've always been amazed at the work you guys from Eastern Europe can do. I would never have thought to use gelatin as a mold to copy a part and make a wax pattern. This has to be one of the best examples of skill, experience, and cleverness replacing money i.ve ever seen.
@mad_wheel2 жыл бұрын
Thank you!)
@augustocondor57142 жыл бұрын
Us people...we are not defined by our limitations...we are defined by our potentials. Creators of Trabant have my appreciation more than creators of Veyron.
@ToyotaGuy19712 жыл бұрын
@@elgur4512 We are all children of the same life-force...Each is given a bag of tools; shapeless mass, and the Book of Rules. Glory to God.
@voster77hh Жыл бұрын
second that. Totally agree
@mreclik11 ай бұрын
This was due to the long years under the rule of the Soviet Union in eastern europe. In the West you could simply buy something, here you had to arrange it. They still do in Russia.
@matthewpolansky17624 жыл бұрын
The difference between a parts changer and a true mechanic was demonstrated here. You are obviously on a remote site. I am a journeyman union Millwright . Respect to you!!
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@SeabornNomad4 жыл бұрын
Excellent work, your finished gear looks fantastic, and your casting techniques are on point. Never stop tinkering!
@craftsmanbyheart4 жыл бұрын
I really am impressed. Good mold making skills, good ingenuity, great finished result! I had to revisit and rewatch. There is so much to learn here.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@tomsmith30454 жыл бұрын
This is a genius fix, really. The gelatin mold probably cost 1/20th of casting silicone, and it worked well enough. Likewise using random candle wax for the casting. For the people down voting, I'm reminded of a quote of what an engineer is by a co-worker - an engineer is somebody that can do for $5 what any random person could do for $50. This thing isn't going to space...as long as it doesn't jam and the teeth don't strip, it's fine. Nice work.
@mad_wheel4 жыл бұрын
thank!
@muzzaball4 жыл бұрын
Extremely interesting - but very labour intensive with so many more steps than I was expecting. Thanks for sharing.
@cyberbadger4 жыл бұрын
Awesome work sir. I can't believe they designed a door opener with a plastic gear! Excellently made gear, fruit pectin worked out suprisingly well!
@fifove3 жыл бұрын
You will be more surprised, when you find out that audi wother pump impeller made out plastic, that's why they break up, pritty much all new car is junk from the factory, they disine to fale at curtain mileage, not like good old engeeniring.
@SianaGearz3 жыл бұрын
The plastic gear is a safety feature, it's a sacrificial part. The door as it is now might cut someone in half. Odds are, the part was manufactured for a Western European market with much milder ocean-influenced climate and actually lasts a considerable time there; but extreme temperatures of Russia aren't particularly kind to it. PA is the most common material for gears due to high toughness and abrasion resistance, but it gains it by absorbing water, it's strongly hygriscopic. And what happens when you freeze water? Well it doesn't behave quite like water in a container , there is some leeway due to how water molecules are suspended, so a bit below freezing point is still safe, but freeze it deeply enough, the polymer will get torn apart from the inside.
@prestonburton85043 жыл бұрын
WOW! we print 3d and then melt out and fill with metal - but that requires pre-engineering a solid model - what a nice shortcut - thank you for both innovation and sharing!!!
@hothmobile1003 жыл бұрын
What filament do you 3d print before casting? Or do you use resin?
@lyteyearz58103 жыл бұрын
@@hothmobile100 Really wish this question got answered!
@LimabeanStudios3 жыл бұрын
@@hothmobile100 pla is very commonly used for this because of it's low melting point
@SianaGearz3 жыл бұрын
@@LimabeanStudios When PLA catches fire, the smoke and fumes are low toxicity, while many plastics are exceptionally dangerous to burn. So you can burn PLA out safely rather than trying to melt it out.
@gerjaison4 жыл бұрын
This is the most innovative way i have ever seen on casting a metal gear. Bloody hell, genius!
@prestigeworld-wide82923 жыл бұрын
Innovative????? This is called lost wax casting and its older than injection molding.
@gerjaison3 жыл бұрын
@@prestigeworld-wide8292 i can see why it's older than injection molding, because it's limited to quantity. Great for homebrew then in these day and age. The use of Off-the-shelf material is quite innovative. Because they aren't purposely used for industrial and it is readily available.
@inayatullah61903 жыл бұрын
Stryker
@deankay44344 жыл бұрын
It is true, gelatin goes with everything! Excellent job of creation. What a legacy. Fire, metal, sparks, this video has everything. Love the heavy timber roof beams in your other videos & others will have to watch all to find this clue.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@akbarhussain17674 жыл бұрын
Hi there MAD WHEEL that gear casting is apsolutely Amazing,well done & thank you for your videos,that was Excellent my friend...
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@pcka124 жыл бұрын
I assume that you live in what was once part of the Soviet Union? I remember a tale from long ago when some student friends were allowed to visit, driving their old (so probably mark 1) Land Rover , part way through the journey the engine ‘died’, but they were rescued by the local engineer who adapted an engine they had by connecting it to the Land Rover gearbox, so that my friends could drive home. I have been impressed by the skill and ingenuity of those engineers ever since!
@user-qy5nf3iu7c4 жыл бұрын
в каждом русском живёт инженер, а всё из за расстояния страна большая, чтото случается и нужна помощь прямо сейчас, ждать подмоги можно но это долго а иногда и жизнь зависит от этого, решать проблему нужно немедленно, вот и приходится знать всё подряд
And that’s probably how they won the war, thos eguys manahed to spam the heck out of factorys to make t 34s
@user-rd5nc1nb9f3 жыл бұрын
@@djyownder109 they won the war because hitler didnt listen to his generals. The german military would have been literally unbeatable if it wasnt for hitler throwing tantrums lol
@oddjobbob87423 жыл бұрын
Necessity is the mother of invention.
@SciHeartJourney4 жыл бұрын
Gelatin and Glycerin, Thank you! That's a great idea.
@RaelNikolaidis4 жыл бұрын
My mother was a “Lost Wax Process" Bronze sculptor, and she did what was basically the same process at a bronze foundry to make her art. With one difference, She allowed the liquified bronze to displace the wax from the mold during the pour. Maybe it’s the size or more intricate detail, but she told me that purging the wax beforehand could cause air pockets to form, compromising the final form. Displacing the wax with the bronze directly helped to eliminate gaps. I’m not critiquing your process! Promise! I’m just curious. I’ve never met anyone else who does this. My mom was the only woman in the USA that did a sculpture that way. ( She passed away 5 years ago ) and I don’t think there are very many men left that do the process anymore either. I’m very impressed Most people cannot do what you just did by themselves in a fully equipped foundry. My jaw dropped. You get serious artistic street cred!
@lifuranph.d.94404 жыл бұрын
God's Blessings on your Mother the Artist and Teacher...and Stevie the good student.
@pacman101824 жыл бұрын
Georgia Bunn made the bronze statues in Joseph, Oregon, she's still alive too
@danielruditapurwanto87403 жыл бұрын
Gelatin + Glycerin.. Absolutely cheaper than rtv silicone.. Thanks for sharing the knowledge.. 🙏 🙏 🙏 🙏
@My_Ideas3 жыл бұрын
kzbin.info/www/bejne/lZfWpHirZp6kY6c
@larescats4 жыл бұрын
You are a true craftsman my friend I enjoyed it
@flashwow16663 жыл бұрын
KZbin channel ko subscribe karo, ☞flash 7star
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@SciHeartJourney4 жыл бұрын
His rebuild was BETTER than the original! Nice work!
@MarkSmith-rb5mc4 жыл бұрын
Really good! Love the gelatin and glycerin idea. Much cheaper than RTV silicone. Thanks!
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@monk82354 жыл бұрын
I appreciate the 'learn as you go' edit. Make it happen!! Awesome.
@CheekyMonkey17764 жыл бұрын
Excellent video! Congratulations on the fix. Brilliantly done.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@_MadFox4 жыл бұрын
Чувак, ты сделал мой день! Все берут силикон, но нас не победить, мы используем желатин! Класс! Решение на поверхности, но блин, мешает зашоренность мышления.Я вот никогда бы не додумался взять его для изготовления модели. Спасибо!
@wydr20534 жыл бұрын
Так он не Русский, наш человек сделал бы проще. Токарь Дядя Вася за пузырь это сделал бы лучше и быстрее.
@wydr20534 жыл бұрын
Я только дошёл до момента где он на токарном доводил деталь. 🤣🤣🤦♂️🤦♂️ Так какого черта ты ебался если есть токарный станок.
@stolyarka_khorol92054 жыл бұрын
Это спиженное видео, человек из Украины, канал у него называется "простые штуки " Даже на ведре имеется данная подпись 👍😂Ну или это его второй канал Англоязычный
@Blowjin4 жыл бұрын
@@wydr2053 косозубую шестерню на токарном?
@bubbelut Жыл бұрын
This is an ancient technique I read about glass blowers would do back in Ancient Greece glad to see it still being used today, way cheaper than having a metal lathe
@johnd17744 жыл бұрын
Loved how you did this with almost no equipment i am an proffesional jeweller and cast a lot the the basic technique is the same but i got all the fancy equipment loved this vid
@David-yh5po3 жыл бұрын
This is a great art to have. Thanks for sharing this video with us.
@angelaracino62364 жыл бұрын
Great job, you’re a craftsman
@KonradTamas3 жыл бұрын
AS WITH PANCAKES, THE FIRST ONE NEVER COMES OUT PERFECT !!! Great video btw, good job!!
@SaulMarquezRousset4 жыл бұрын
Impresionante!!! Felicitaciones!! Gracias por compartir!! Se necesita reparar más y consumir menos en este mundo!!
@JohnDoe-gj4dv4 жыл бұрын
I have not seen this kind of craftmanship since the 1970s..... Extraordinary.........
@Clipster154 жыл бұрын
I've actually never cast something, but perhaps in the future a riser (tall column at exit of casting cavity to hold molten metal) would help with smaller details like those teeth. I believe the blunt teeth are due to shrinkage, and mostly surface tension of the molten aluminium. The tall column (if wide enough) will stay molten long enough to supply metal as the (presumably small enough) casting cools / shrinks and most importantly (if high enough) put the casting under higher pressure to help overcome the surface tension and force the metal closer to the walls - making a more dimensionally accurate end part. That is my reasoning anyway. Still it is cool idea you had there to extend the teeth as you did, and it appeared to work. After the lathe cleanup, it looked great.
@dougaldhendrick34974 жыл бұрын
First cast shows what happens when you don't fire plaster mold. there is chemical water embedded in the plaster, and needs firing to remove. When molten metal hits it, it boils and steam vapors are released, so pressure builds up internally and the metal can't hit the surface it needs to. If you are really silly and try this with much higher temperatures as in bronze and brass, you will likely get much more reactive and explosive results. I know this intimately from first hand experience. A small figure cast this way made it through the process, but it was riddled with air pockets like a sponge, and molten brass was spitting out of the mold for quite some time and distance. A case of run like shit until it stopped. I can estimate if the shape was bigger, and let's say was more undercut, it would have exploded fully.. a dangerous job to mess with without proper knowledge!
@mcshawnboy4 жыл бұрын
@@dougaldhendrick3497 I can appreciate what you're saying about water in the casting plaster as I joined a craft guild in Annapolis MD, Patuxent Lapidary Guild for a Lost Wax casting class. For some long lost reason, maybe the vacuum dome machine was not in service or being used by someone else and it could've been at closing time, nonetheless my mold had much porosity. And the last of 3 projects a ring with grain of wood and a 10X30 cabochon of reticulated quartz i.e. gold hair-sized rods in a clear base of quartz looks beautiful! Well the ring broke from bubbles in the mold and that was the last wax of that pattern inventory we had. I might try to repair the ring to make a new wax as it's not currently in any book I've looked at, probably old!
@DavidChadwell4 жыл бұрын
As someone who has done casting, I can tell you that you are right about the surface tension. It is very high for molten aluminum. A riser on the sprue and vent will build more pressure in the cast, forcing the aluminum into smaller details.
@researchandbuild17514 жыл бұрын
100% this. If he would have used a riser the gear most likely would have come out perfect
@Wachest4 жыл бұрын
That is the kind of cool stuff I like to see.⚙️
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@diylife91513 жыл бұрын
I played this video very much. You are a real master, thank you, hello from Russia, I really love DIY. Happy New Year, health and happiness to you and your loved ones
@ArtMeetsScience4 жыл бұрын
Well done video. Beautiful result. I thought about doing this, but I found a gear for my old garage door opener on EBay. It was considerably easier. I guess I'm just lazy.
@radioguy16204 жыл бұрын
youre kitchen utensils thank you
@dirkdejong84214 жыл бұрын
My guess is that the plastic gear was there as a failsafe so that if excessive torque was applied to the device that the gear would break rather than burning out the motor or destroying whatever was blocking the gate.
@thewhitecommunity4 жыл бұрын
Yep. It's like a fuse in an electrical circuit blown. It, the plastic gear, was designed to go first and least expensive to replace.
@ges79914 жыл бұрын
metal gear with key is much better. Don't have to replace gear... just key.
@vieuetcon4 жыл бұрын
An electrical motor should be protected with current limiter, and a detection of lock with electronics too. This plastic piece has no place here, except making maintenance activity for the maker of the system that will come every 18/20 months change quickly that piece and charge you. easy money.
@EvelynH-tj1qt4 жыл бұрын
@@vieuetcon Kind of depends on the quality of the manufacturer and torque of the motor. For example, the powerfeed on a mill is powerful enough to break a lot of things that aren't connected to it directly, so they use plastic gears so you don't break a tool or something.
@kudalauthebat4 жыл бұрын
when you can afford all those machine
@brucewilliams62923 жыл бұрын
Well done! Thank you for sharing.
@grabitz3 жыл бұрын
By golly it worked. I was looking for an easier way to cast aluminum. Thanks great video.
@mustgetlife4 жыл бұрын
well done, one less broken thing, one less thing in the trash.
@demef7584 жыл бұрын
I'm pretty sure the broken nylon gear ended up in the trash after the completion of the casting ....
@pacman101824 жыл бұрын
@@demef758 better than the whole thing going in the bin
@flashwow16663 жыл бұрын
KZbin channel ko subscribe karo , ☞flash 7star
@Tinker_Nerd3 жыл бұрын
Very well done. Only thing is that very often, when plastic and metal parts are used for a mechanism, the plastic parts are usually designed to be the weak point that's cheap and easy to replace, that way the metal parts that are harder/more expensive to replace are less likely to break. No idea if that's the case with this, just something to keep in mind
@alaric_2 жыл бұрын
That is true but seeing how the garage door has to work in freezing conditions where ice can accumulate on the tracks, this kind of cheap plastic gear seems... not ideal. To put it mildly. Cold temperature itself makes plastics brittle and compounded by any kind of resistance on the tracks seems like as a part that has to be changed constantly. Cold always makes everything more expensive and i would have went with some kind of load resistor that cuts power if things get stuck.
@sonicdewd4 ай бұрын
In most cases parts-breaking is a terrible way to give a safety feature/characteristic. There are other ways to do this that aren't self-destructive (clutch and/or stall sensing for the motor are two that can be used together - and cheap).
@screwsnutsandbolts4 жыл бұрын
Excellent work ! 👍
@TheLorkM4 жыл бұрын
Super video, to have heated the mold before pouring the aluminum was a very good idea. I'm melting copper myself and it's going to serve me to have a cleaner result 👍
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@NBryanBlack3 жыл бұрын
Part of the reason for heating the mold is to melt the wax and pour it out to make room for the metal.
@Askjerry4 жыл бұрын
Спасибо, что научили меня самодельному силикону. Мне нужно попробовать это как недорогой литейный материал. Отличная работа! Thank you for teaching me homemade silicone. I need to try this as an inexpensive casting material. Great job!
@mcshawnboy4 жыл бұрын
About the homemade silicone casting recipe, could you put in English subtitles for this part?
@peteraugust52954 жыл бұрын
spare part: 2,59€ Knowledge gained while casting a gearwheel: priceless
@antares-the-one4 жыл бұрын
as i thought. There is no way that american/european fatass would understand what is a feeling to make something by own hands, especially when it has purpouse or is needed
@sprescav4 жыл бұрын
@@antares-the-one If you live in south america like me, you'll find very nasty ways of doing things as well.. but from a practical perspective, i'd go for the 2.59e spare part
@piotrr54394 жыл бұрын
@@antares-the-one yea! and the others do not have internet and still exchange 1.44MB floppies, right ?
@peteraugust52954 жыл бұрын
@@antares-the-one ?
@chec69204 жыл бұрын
@@peteraugust5295 I was thinking the same. @Antares what do you mean?
@FixTechStuff2 жыл бұрын
Fantastic job. I can't believe a gate mechanism like that had a plastic gear in it...Pretty sure the manufacturer knew exactly what they were doing.
@Thesupperals2 жыл бұрын
You gave my life new meaning to purchasing cheap crap.
@riosur774 жыл бұрын
Muy bueno Maestro, gracias por compartir .
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@tonitouchberry8944 жыл бұрын
Such a simple recipe - gelatin and glycerin! I was surprised that it held up as well as it did without tearing!
@antoniocelemin67313 жыл бұрын
O
@flashwow16663 жыл бұрын
KZbin channel ko subscribe karo , ☞flash 7star
@AstroSirrus4 жыл бұрын
Wow!!!! This is amazing!!! Thanks for sharing!!!!
@Nyarmith4 жыл бұрын
This editing is awesome!
@babalooey1004 жыл бұрын
Everyone: The original gear may have been made out of nylon in order to make sure it broke before damaging something else - like the hand or leg of whoever was unlucky enough to get caught on the sliding door! Great video non the less!
@eksine4 жыл бұрын
now we can see dogs and children cut in half by a monster gear
@chrisbloodworth724 жыл бұрын
This is the dirtiest, grungiest, way of casting I've seen in a long time. But good work man. I never would have thought of gelatin.
@youscous93934 жыл бұрын
Jay Bee malgres ce ne pas solide
@StoneCoolds4 жыл бұрын
Thats why they beat the germans, while the germans where mini producing super complex tanks with lots of complex processes... They where making thousand of tanks out of duct tape, melted pipes and wax xD
@MrPland19924 жыл бұрын
NovorSec German tanks were 4 times better than American tanks. But the Americans had 5.
@xXYannuschXx4 жыл бұрын
@@StoneCoolds Uh, German tanks were also rediculously more effective, to the point were the Tiger tank was pretty much invincible against the T34 and forcing the Soviets to use "sawed off" artillery guns in their tanks.
@lifuranph.d.94404 жыл бұрын
@@StoneCoolds With manual gearboxes and Tractor controls for simplicity.
@michaelquinones-lx6ks Жыл бұрын
Good Job and Well Done. That home made metal gear is much better Than that piece of plastic junk it replaced my hats off to you sir!
@mobayguy Жыл бұрын
Excellent Video and Great Job - I've had the same problem. Thank you
@zoranpocrnja26464 жыл бұрын
0:01;!Yes good one ,but when you work in the mines need to wait for spare parts up to two weeks losing your incentives no 3 d printer this is best option;!
@rollerdavem4 жыл бұрын
Gelatin... I never would have thought of that. Clever.
@FrequencyOfThought4 жыл бұрын
Looks like farm boy ingenuity
@borivojetravica5694 жыл бұрын
What is the clever? How much cost that spare part? How much you earn per our? This is not clever this is stupid lost time! In my country we say priest with out job baptized goats.
@FrequencyOfThought4 жыл бұрын
@@borivojetravica569 When you live somewhere that takes 4-6 weeks to get a part + shipping costs its actually not wasted time, because not only has he replaced the gear but he replaced it with a metal one that's going to last his entire life preventing future breakdowns, so really it's actually justified time. 3D printing it out of metal would of been faster, or using a lathe and a drill press etc but who's got that kind of tooling and money laying around
@68pishta684 жыл бұрын
Try replacing a 40 year old cassette deck nylon gear when they quit making them. Hard to toss a top notch deck for a little cracked gear.
@fenderrexfender4 жыл бұрын
Gelatin only worked good because he had a hardener with Russian writing
@dorianeric4 жыл бұрын
Grat idea and amazing job making the video, really enjoyed it :)
@a787fxr4 жыл бұрын
Great job on the hear and the video. I like the music as well.
@sidneypassos4 жыл бұрын
Fantástico! Vou usar essa técnica aqui no Brasil!
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@mikejb2009a3 жыл бұрын
Great casting work I think you should be either in the jewellery or art business. On the other hand the plastic gear may have been intentionally the weak point in the system almost like the fuse in the wiring system. Metal gear equals no fuse. It's always nice to have a weak spot in the system that can break and be easily replaced.
@MikkoRantalainen Жыл бұрын
I agree but the mechanical fuse should be cheap unlike full gear. Maybe the part that engages with the gear should be a stick of aluminium or even plastic? That would allow having full metal gear with full metal axle and the connection that transmits torque could be e.g. 40 mm long stick of 8 mm thick aluminium bar which would snap if too much torque is applied for whatever reason.
@pablogarciavasquez66374 жыл бұрын
¡INCREÍBLEMENTE LO HIZO ! ERES GENIAL FANTÁSTICO ! SALUDOS DESDE PERÚ.
@mcorrade3 жыл бұрын
You know when someone is good when they make it look easy to do :) Nicely done man
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@JamesDoylesGarage4 жыл бұрын
Russians always inspire me. They have that Get er Done attitude :)
@fenderrexfender4 жыл бұрын
What happened to America 😭
@Eagles06904 жыл бұрын
Rex Baird I don’t know about you, but I’ve had it all my life. Don’t tell me something can’t be done. I’ve have had engineers tell my stuff I did wasn’t supposed to work, but I made it work!
@simonlopez89043 жыл бұрын
P
@fenderrexfender3 жыл бұрын
@Nadia Brooks consumers sitting on their fat ass watching KZbin videos not making shit with their in unremarkable lifes
@ashreid203 жыл бұрын
you know you just quoted an American?
@alanfenick11034 жыл бұрын
“Use it up, wear it out, make it do or do without.” Saw this on a toilet paper dispenser!
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@marcerasmus37453 жыл бұрын
Just Brilliant, many thanks for sharing...made my day
@flashwow16663 жыл бұрын
KZbin channel ko subscribe karo , ☞flash 7star
@sofiatgarcia39702 жыл бұрын
Nicely done. Makes me wonder how much you've learned since 2018. I'll check you out!
@MrZhefish4 жыл бұрын
mhm thanks for the tip with the gelating/glycerin. i try it
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@CaptainSwoop4 жыл бұрын
Well done Mate! Very resourceful and a well made video. Greetings from Australia
@jettramel4 жыл бұрын
Nice save, I worked in the family jewelry store, the lost wax method of making a mold works great, where there is will & time there is a way to save machines like this. I've been wondering how to cast aluminum, this shows me how. Thanks, great work.
@jettramel3 жыл бұрын
@glyn hodges Thanks Glyn.
@teamgreen4044 жыл бұрын
Some people have extra talents. Thanks for the awesome post.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@Tigerbythetoe4 жыл бұрын
Very cool video man! I’ve seen a few like this one, and you used slightly different materials to make your mold but it’s cool to see there are several ways to get the job done. Was the broken gear HMW plastic or Nylon 66? Just wondering. Manufacturers often make a part like that to be a weak link on purpose, I guess so it breaks or strips out instead of something else. At least you know now it ain’t the weak link anymore!
@voster77hh Жыл бұрын
Aluminium would pretty much break or wear out the same. Maybe it will crush your arm or foot in the door now, before tooth melt or break. I don't think anyone in Easter Europe would care that much. the plastics is likely PLA. At best PA12 Nylon or ABS. Had such a gear in my milling machine Einhell MT-65 aka Minimill clone. Replaced it with a tothed belt and a §D printed PLA belt. The SLS laser printed PA12 nylon should have been better, but the print process heat in the closed shop microcontroller software is less than ideal. So that wore out quickly. This technique would have allowed to cast either plastics or alumium for a direct internal gearbox replacement. If it had niot been for the belt drive to be the better long term option anyways I would have gone for such a replacement cast as well. It is simple genius.
@Feisal133 жыл бұрын
Good work, plus amazing music, is it Jimmy Hendricks ?
@jpgarcia904 жыл бұрын
As others have pointed out, having the plastic gear in there is an excellent design element for safety reasons. The problem is that manufacturers hardly ever advertise and have replacement parts (+ service) readily and easily available to consumers.
@wpowerwagon4 жыл бұрын
Now that’s a really great job and a lot of work but worth it, now this gear should last for a very long time, thanks for sharing your great video
@xMaverickdev3 жыл бұрын
As I like working with casting and making things, it always gets me to laugh -> Homemade. You only need lathe, mill, whole workshop and furnace :D Anyways - nice clip :)
@steputube2 жыл бұрын
Not always, no. Some of us still remember our sawing and filing skills.
@tobyb45134 жыл бұрын
I've used clear builder silicone (RTV one-part) mixed with a few drops of glycerine and a dab of food colouring to make casting moulds. The colouring is used to check whether the glycerine is fully mixed through.
@SianaGearz3 жыл бұрын
Nice!
@jpeterman61784 жыл бұрын
Thank you. Great video. I, too, find ways to be more self sufficient.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@rcalin93543 жыл бұрын
Nice work. Good job!
@C-M-E4 жыл бұрын
While gelatin was a brilliant move, if you want a slightly more expensive option and need to cast more than one copy, get yourself a six pack of home improvement store variety 100% silicone caulk and a small can of MEK. Mixing what you can use within 15 minutes or so, squirt in 1/4 to 1/2 the caulk tube at a time and an ounce (or your measurement system of choice) to thin the silicone, mix it up to where it's pourable, and pour as usual around your chosen part. In a few hours after the MEK evaporates, you'll have yourself a very fine detail mold. Not skin safe, but works fantastic for making parts, figure casts, etc.
@bill38354 жыл бұрын
That actually sounds easier than using gelatin on top of your stove (and the wife would be happier)
@C-M-E4 жыл бұрын
@@bill3835 As long as the MEK fumes don't drift into the house, she'll be happy as pie. =) Compared to commercial brands like smooth-on, I suspect their molds will have a longer shelf life but this costs a quarter of a two part system. I made an entire silicone bodysuit that went over a lycra base that I molded on top of twill weave fiberglass (treated with the same silicone method to pick up the pattern for a flexible carbon look) and it worked great, plus I still have that suit after 5 years plus, and the treated fiberglass that I've used for gaskets and non-stick bases on other projects. You can also color the silicone with pigments as you would a commercial product. That whole suit probably cost me ~$50 in supplies, including the fiberglass, brushes, rollers, rubbermaid containers, etc. That much silicone in commercial grade would have come out well over $300, product only.
@valken6664 жыл бұрын
You can melt and reuse the gelatin for years to make an infinite amount of molds.
@bill38354 жыл бұрын
@@C-M-E You can use the microwave in a different room than the kitchen? Shhh! My wife might hear you!
@yamahantx70054 жыл бұрын
You know you're in Russia when your fire resistant gloves have holes in the fingers. Hardcore!
@InterTekker4 жыл бұрын
ha ha
@shalormckee27844 жыл бұрын
That's every metal shop I've been in. I'm from the US
@srcclouston4 жыл бұрын
So Ivan Vanko was based on a real person?
@user-qh5pg4sl7z4 жыл бұрын
To be fair, the holes are very small and safe! xD
@user-qy5nf3iu7c4 жыл бұрын
перчатки с дырками это нормально, наверняка новые лежат в ящике но брать их никак нельзя вить старые ещё не рассыпались, это не скупость а бережливость
@mikesouthby93594 жыл бұрын
Brilliant, I really like the homemade silicon:) Thank you for sharing Блестящий, мне очень нравится самодельный кремний :) Спасибо, что поделились
@chadvoller4 жыл бұрын
A bit misleading, as it isn't anything close to silicone. It doesn't have near the flexibility or can take the repeated abuse that silicone can. Gelatin glycerin molds are used in the art world for making quick duplicates, it can be melted over and over and used again. Whereas when silicone is cured, there's no do overs. But gelatin glycerin is also very sensitive to heat and moisture. So you have to be aware of that with your materials, or it'll deform while you are trying to make a replica if too much heat is generated when curing or it is sensitive to moisture (resins).
@Pren664 жыл бұрын
In russian it's: "Блестяще, мне очень понравился самодельный силикон :) Спасибо, что поделились. "
@guloguloguy3 ай бұрын
GOOD WORK!!!!!!!!!! THANKS, FOR SHARING!!
@HiTechDiver4 жыл бұрын
Very cool, and what a project. Imagine the steps you could save by scanning the part or drawing it in a solid modeling program, and 3D printing one. I'm in such a college class this semester. There are some pretty durable materials that could be used, especially with one of our resin printers. Our college also just received a 3D metal printer that is the cat's meow. Guess who's going make some stainless steel tools for a diving kit.
@saf-nsk97244 жыл бұрын
When I was second year student, we did some kind of aluminium part in soil, soil-method(idk how is it called in english). It seemed to be weird but the process was cool. The funny part was that our lecturers were students obtaining their master's degree so firstly they hadn't heat aluminium to proper temperature so we've got it on second try. Nice job, keep up the good work! Now about lubrication - as I see it's blue, what lubricant do you use?
SAF-NSK In US probably is called Sand casting. Very common process. I think Aluminum is mostly done with Lost Wax process. We also used to have Stainless castings made with Lost Wax. At B/E Aerospace.
@bulletproofpepper24 жыл бұрын
Thanks for sharing great work!
@user-sf8dz4nf7o4 жыл бұрын
Nice work my friend!
@joseph_hertrich10384 жыл бұрын
Some places I've seen would have finished the repair where the pieces were glued together and reassembled from there.
@flashwow16663 жыл бұрын
KZbin channel ko subscribe karo, ☞flash 7star
@user-vj1hy8si7p6 жыл бұрын
Nice work. I can not read Cyrillic characters, so can you please tell me if it was plaster or something else you used to invest the wax. I once did lost wax like that in my kitchen oven, and when I poured lead into the hot plaster it exploded and burned the floor. Since then I know to burn out plaster several days in a very hot kiln to drive away the molecular water, so no steam and no explosion (I also bury in sand now). I enjoy all your videos.
@mad_wheel6 жыл бұрын
I used a building gypsum. This is not a special plaster, just plaster, which dries quickly. After a few days, I dried it, after baking in the oven.
@numberslettersass4 жыл бұрын
Fantastic job! Bravo!
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . , kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@Super_Natural_Power4 жыл бұрын
Tht really works ! You are genius !!
@vixiki4 жыл бұрын
Just a stupid question, and I understand this was a learning process, but would it not be easier to just make the wheel on the lathe, seeing as you have one?
@mad_wheel4 жыл бұрын
A gear wheel, and even with a slanting tooth, you overestimate the lathe a little, for this you need at least a fraser))
@justasniper834 жыл бұрын
Well done! The reason for that gear was made in delrin, tough, is that in moving gears a weak one is needed: if something goes wrong or is overstressed, the weakest one breaks, saving most expensive one (a geared rail costs more than a single gear). Now if something goes wrong the risk is breaking the rail...
@MrTylerNinja4 жыл бұрын
The cast iron one while being stronger than the gear made of plastic is still by an order of magnitude the weaker gear of those 2.
@emrage4 жыл бұрын
@@MrTylerNinja it's not iron looks like ally easily sawed etc. Correct my if I'm wrong
@phillhuddleston94454 жыл бұрын
@@emrage I'm guessing it's aluminum.
@giuseppebonatici71694 жыл бұрын
@@phillhuddleston9445 it's is aluminum. if that was molten iron you would be seen yellow-white glow as the melting temperature for iron is insane high (about 3000°F, vs 1100°F of aluminum). also, there should be sparks randomly generated if was iron or steel. and you would never be able to melt it with that weak of a forge, you need an arc furnace.
@a.p.23564 жыл бұрын
@@phillhuddleston9445 Yep, that's almost certainly aluminum. Could be some kind of zinc based pot-metal, but it melts and machines like Al.
@SuperFunny654 жыл бұрын
Pretty cool! Nice job.
@sk8urbike9354 жыл бұрын
Excellent production 👍
@PyroFalcon4 жыл бұрын
This is how a real man does it
@mad_wheel4 жыл бұрын
)))
@mountaindiver-64664 жыл бұрын
Good video, the surprising part was the fact the motor had a plastic cog to begin with
@AS-ug2vq4 жыл бұрын
Nylon 66
@ChrisSmith-bw1nt4 жыл бұрын
Designed that way I suppose. Somethings got to give.
@dansmolen16184 жыл бұрын
Mountaindiver, Good call,thought I'd missed something!
@daveharr79694 жыл бұрын
Nylon is used to keep the noise down.
@dansmolen16184 жыл бұрын
@@daveharr7969 valid point! The cast gear will break sooner I suspect... Looking at its use,noise shouldn't be a huge factor though. Probably sneaky shit being as likely?
@matthewfocke53602 жыл бұрын
Skill and know-how...Is this a former Soviet country? Great job. It pays to be self-sufficient. The U.S. is going to soon learn to adapt to the changes ahead. Ingenuity is paramount.
@Bp10333 жыл бұрын
I will use this knowledge to cast and rebuild parts of my car that are no longer in production.
@kojomensah74744 жыл бұрын
Knowing the ledge knowledge is good it shows you how to be free instead of consuming all the time it is good to be able to build or do something now you must pass this on to the young people around you who is willing to learn because soon they will not have the skills to do these things
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@joew70134 жыл бұрын
Brilliant! Probably quicker than trying to source the original spare part.
@automobilefactory16293 жыл бұрын
Friend watch this video and plzz Support me . kzbin.info/www/bejne/ZqSwZHaMj7GKiJY
@peteraugust52953 жыл бұрын
thanks for that geltine + glycerol tip. never heared of it before and silicone is super expensive
@valentinlishkov95403 жыл бұрын
FREE sheet metal, gears, curves and others www.onlinecadtools.com/myindex_en.HTM www.onlinecadtools.com/english/html/sheet_metal/index.HTM www.onlinecadtools.com/english/html/index_gears.HTM www.onlinecadtools.com/english/html/index_curves.HTM www.onlinecadtools.com/english/html/index_st.HTM kzbin.info/www/bejne/bYiUkJ2AZr2KsNE kzbin.info/www/bejne/il7Mo3iFerSBaNk Thanks! I need advertising and orders
@voster77hh Жыл бұрын
great job - learned a lot
@dominikraphaelpascallinden49054 жыл бұрын
how stupid is it to build a gear out of plastic for this machine, i mean they probably sell it for shit loads of money, but u made it better with ur own gear, now it will last for ever until the next plastic part will just break. Good work my friend, tnx for sharing.
@vittocrazi3 жыл бұрын
because plastic is pretty much inmune to weather (unless very extreme temperatures are reached). and pretty decent wear resistance. so they work ok as long as you dont load them a lot or gets damaged with sunlight.