Homemade long Bar clamps

[@pesa9063]

From my where I am I could make those for less than $5 scrap metal... the ones you made are almost your height which are much expensive nowadays.. thanks for sharing your idea Sir, much appreciated

[@aj_meshuggah]

Thank you for sharing the knowledge of making those clamps with us. Very simply and well made. Ta👌

[@luischavero7946]

Fue una experiencia fabulosa ver tu Video , ya que con que facilidad lo explicas sin decir una palabra , había visto muchísimos y este fue el mas explicativo de por si , muchas gracias amigo por ceder tus conocimientos . , desde Venezuela Patria de Simón Bolívar

[@theantichrist6524]

That was by far the most practical anyone can build it jobs I've seen well done !

[@purachi5236]

Muy buen vídeo, linda idea. Gracias. Saludos desde las sierras de Córdoba Argentina...!! 👍👌💪🇦🇷

[@IAMMythra]

That's better quality than most clamps. Very nice.

[@moisesmunoz2422]

Excellent, thanks for your contribution, very good video, Blessings!!! San Juan, Argentina

[@homemadeinlviv8041]

Many thanks!

[@tivinhatui123]

A good example for F clamp made from scraps we can find them around and make them useful tool, better than many times of chinese F clamp that we buy from market. Thanks for sharing your video.

[@ricardosilvasilva9739]

de todos , esse é um dos melhores e mais simples que ja vi. parabéns

[@ЛарисаКопылова-с1х]

Подсела на Ваш канал! Нравится всё, что Вы делаете! Дальнейших творческих успехов! 👍💟👏🏵️

[@laszlocsapo3279]

It is the best homemade clamps, what I saw on youtube. Thanks for the upload.

[@d.slater3958]

You make yours a bit different than other designs I have seen. I really like how you made yours. I think when I powertig my next set of clamps I will do them like yours.

[@contact5485]

trop terrible !!! très bon travail !! voilà comment je vais faire mes serre joint !! merci et bravo chef !!!!!

[@neliorodrigues2249]

Valeu amigão a bela demonstração ferramenta muito útil obrigado

[@tonybp965]

Man those are nice and long. I've gotta learn welding man. There's aworld of great things to do if I learn.

[@davewilliams355]

Tony Bryce Perez me too, I'm getting an arc welders for my birthday this year and am going to learn.

[@toddpaulsen1396]

After I bought my first everlast welder and learned how to weld it opened a whole new world for me. You won't be disappointed from learning. You might even get hooked.

[@theovercomer2006]

Absolutely go for it.

[@theovercomer2006]

I've been a welder for 8 years now, and wish I had more time to weld on my own projects instead of work.

[@Robocoppat]

Did the swivel part hold up? Also how well does the clamping force hold up? These are, by far, the most easiest to build bar clamps here on KZbin. Great video great job..and loads of common Sense. 👍👍

[@billyjohnesterhuizen6340]

BRILLIANT JOB DONE!!!

[@nilsoncosta7723]

O melhor clamp que vi, parabéns!

[@franciscobras9258]

parabéns pelo seu trabalho. Foi um dos melhores que eu já vi na internet.

[@homemadeinlviv8041]

Thanks )

[@lunatic9619]

Круто 👍 хороший вариант крепления верхней планки.

[@kopriva007]

Thanx for the idea and inspiration. Simple, easy yet great clamps. :)

[@abubakarali9296]

👍👍👍.....simple & practicle. Greetings from Malaysia.

[@ciobanugeorge187]

Mad..you`ve got some skills! Great job!

[@ЖалгасКожабеков-п4ь]

Ciobanu George еу

[@Chroniquesdemaker]

very good job boy ! congrats

[@bryanbryan7080]

bar clamps have the clamping screw at the bar end so you're not fighting the bar when tightening.

[@andresscaglia9134]

Muy buen video y simple herramienta ,,lo voy hacer,no tengo sargentos tan largos,,felicitaciones,abrazos desde Misiones-Argentina

[@sungchulryu]

most simplest clamp I've ever seen. great.

[@djamelhamdia134]

2016: is not a professional carpenter. 2020: a master carpenter.

[@andyroa9904]

Where did you acquire those bolt screws and it's fittings ?

[@mr.b.w.3146]

Nice home made stuff, must acquire meself a welding kit. Wonderful what you can do with a bit of scrap!

[@cornelius131]

👍 👍 👍 You could have made the head removable or reversible because the tube will bend with use.

[@capitonadoacolchadoquiltin406]

Congrats, sincerely, the best in class!

[@prabathchandana6218]

Great job.simple but strong than others

[@contact5485]

super bricolage !! t es pas un pro mais tu fais du travail de pro !! bravo chef !!

[@shannonpeterson4891]

Your imagination is unstoppable!

[@telosfd]

Very nice video. Are those old screws are coming from old vise?

[@homemadeinlviv8041]

Thanks. Yes those screws i took from a pair of steel clamps

[@antonioeugeniocunha7768]

euros para os c

[@antonioeugeniocunha7768]

euros para os c

[@donniegaskill1836]

Per Barry Wind's question, if you were making these for a customer, charging for welding time and parts, how does that stack up against those that you can by at Lowe's or Home Depot?

[@homemadeinlviv8041]

Difficult to answer at once, if i decide to make it for sale i have to calculate everything first. Those clamps I made for my personal use and the result exceeded my expectations.

[@HotRod12667]

You clever man!

[@dlk4318]

excellent job! I don't believe famous brand such as Bessey or Pony are any better quality then your.

[@Yegorization]

Wow! Very good!! If you don't mind, I will steal your idea))) Thanks for inspiration))

[@homemadeinlviv8041]

Sure, I don't mind )

[@radioparanoiko1566]

A very good idea congratulations from the city of mexico

[@cokhichetao72]

Tuyệt vời, xem lại vẫn hay👍

[@canaldoportugues10]

Top 💯💯💯💯💯💯💯👌👍🤝

[@Joeoshea1957]

Nice work mate thanks for the video

[@jzeerod]

for the vertical bar i wil use schedule 90...do you have to go so thick? i see all these people building bar clamps with 6 inch C channel, thats insane.

[@kasimfarahani2122]

welldone my friend,,,you helped us alot and made us happy,hope Mighty God makes you happy, excellent video,,,salute from Iran ,,,,

[@homemadeinlviv8041]

Thanks)

[@tonybp965]

Before I continue watching your vid and reading some remarks, these parts were yours already or you went out to buy them. it doesn't matter, I just wanted to know what they cost you. I'm kinda of new to all this self-made clamp builds. You seem to have all the right parts without showing how you cut them or already conviently had them.

[@eduardoquilumba20]

Tony Bryce Perez rc iych omby

[@yaarkhan5294]

hi.. how you have made the socket for ball socket joint ...? can you please show its tutorial thanks for your wonderful tutorial

[@ramonargueta1841]

Looking good man !!!

[@usmanfalah3431]

You need to increase the WELDING AMPS to MAKE WELDING BEAUTIFUL

[@markuslittleworkshop6346]

Good Idea ! Well done !

[@SgtBooker44]

If you moved the threaded parts yo use to lock the end in place 90 degrees to one side, would the clamps sit better on a table or bench?

[@elviodacostaruas7946]

Don't mind every industry that we lose money, make our own way.

[@laebdangrs4274]

Hello dear friend .... How are you doing, you're okay ?! I am one of your followers always .... Thank you very much for this excellent design and who benefited from it a lot ... I wish you good health and happiness

[@สายัณห์ศรีดํารงค์]

£

[@حراماتالتعببيهم-خ8ط]

هلا

[@حراماتالتعببيهم-خ8ط]

ههههههههههههههههه شو قلت

[@ashishvatchas]

very well executed work and very well designed it will help me alot.great idea buddy.subscribe only because of this video.hope for getting nice projects from you in future.

[@ImperialStormtrooper-66]

👍show an example of using these devices🤝

[@bigsuperpower]

love it cheap and fairly easy

[@homemadeinlviv8041]

Yes and very practical

[@davewilliams355]

Very clever well done

[@benjaminmoore4592]

I've got to weld me some long clamps with my powerarc. All of my existing clamps are too short for my next project.

[@arnoldgarcia6811]

Dave Williams zucchini

[@claudiodonizeteribeiro1031]

Excellent . Amazing

[@rummy98]

Could weld on a nut and use a drill with a socket chuck to quickly tighten or loosen the clamp.

[@franciscobras9258]

Parabéns pelo excelente resultado.

[@daluadavi]

Very good, congratulation for work...

[@photova9016]

Идея отличная , только токарку не показал и при сварке силу тока побольше нужно чуток выставить, швы были бы идеальные, и 2 электродом варить.

[@papaike2]

Hope your a better carpenter then a welder.

[@michelenapolitano1656]

Perfekt, simple clamps homemade

[@rosarioalvarez5904]

Buen trabajo Home Made lo felicito desde México gracias

[@hotfelipehot]

Do an excellent job!

Great job!

[@frankemiliobarriosterreaux8060]

Muy buena idea, lo felicito, saludos.

[@pammandas2566]

Very nice sir

[@antoniosalvatierra1462]

Muy bueno todo .quedo excelente y me gustaría que se pudieran ver las medidas de cada parte .saludos desde Argentina.

[@herminigildojakosalem8664]

Excellent. I wish I could make like this too.

[@georgschafer3697]

gut gemacht!

[@efremneuherz6549]

did you buy the threaded rod or did you turn it up on a lathe? also what do you call or where did you buy the little cup end piece that you tapped tight with a punch on the threaded rod?

[@BasildeRayen]

Looks like factory made, probably salvaged from another smaller clamp (broken maybe?)

[@KitoMarchetaria]

❤️ Thank’s for sharing !!!

[@andrej.babichev]

Заднюю часть можно было тоже на втулке сделать, переставлять на трубу любой длины

[@علیبرم-ش6ي]

برنامه واقعا عالی ولی چه جوری میشه سیو کنیم تا بعدا به دردمان بخوره

[@fabiangutierrezyaver8090]

Excellent!, thanks for sharing.

[@naamfcthefox71]

Good job . I like show . from Thailand

[@rdfgd9878]

❤❤❤❤

[@bertvanspieker]

I am welder and I make also some tools by myself and they are better than the ones you can Buy!

[@josesrsilva4050]

Que bacana! Muito Good! Legal.... 😎👍

[@chef_anirban]

Nice work

[@2010AROLDO]

Muito bom o seu projeto, parabéns.

[@lourencosantiago9779]

Very nice job! congratulations! Lourenço Brazil Minas Gerais

[@danielparsons834]

How long to make? If you'd have done the same in overtime you could have bought some. 😉 nice job mind

[@marcelonetto9235]

Trabalho eficiente numa ótima ideia. Obrigado, desde o Brasil...

[@homemadeinlviv8041]

Thanks)

[@georgechard4977]

I marvel at the God given inventiveness of my fellow man. Good job!

[@homemadeinlviv8041]

Thank you for this comment )

[@westbrick930]

Where do you buy the clamp pads that go on the end of the threaded rod? Also what are they called?

[@DiepLinhLung]

Bạn ơi cho mình hỏi bạn dùng keo dán gỗ tên là gì thế?

[@davidromero2777]

Very very good

[@OleksandrShevchenko1]

Чтобы зачищать швы лучше купить специальный круг для болгарки. Он толще - можно не боясь придавить сильнее, не режет, а именно зачищает.

[@pablonicolasmedina3724]

muy buen trabajo, sencillo y perfecto.

[@osvaldodiaz8073]

Genial !!!! muy buena la idea felicitaciones

[@CinfProd]

Hi. Please answer question. Were you have this materiels

[@lionmanyung4614]

he is a good man we like in african tank

[@shevamisha1995]

Можливо, краще було зробити рухомим упор, а гвинт статичним, таким чином зручніше бути затягувати гвинт. Але ідея класна, Лайк)

[@thomazneto58]

Fantastic!!!!

[@user-ct3cd3cc6o]

Very clever, well done

[@juarezpereiracostapereirac142]

Amei a ideia .

[@jnb-criandodebaixodaarvore9964]

Ótimo grampo de aperto parabéns meu amigo adorei muito