Homemade Heavy-Duty Bar clamps

[@invictu4488]

Carpentry and metal work in a bag - now that's a serious skillset right there! 👍🏿👍🏿👍🏿

[@gussy6783]

Wonderful job by someone who is very patient and cares. Those clamps will likely be around for several generations. Thank you.

[@chungheicheung7166]

?q

[@quellenathanar]

There is something satisfying about repurposing old rusty steel into great. You are an inspiration.

[@MaryAnnNytowl]

Definitely! I always love to do this, too! Even rescuing old tools that look like they are only suited for recycling instead, I have fixed them up, and there's little that's more satisfying!

[@mmanut]

Best Clamps I've ever seen. Been a Custom Home Builder & WoodWorker over 30 yrs. GREAT JOB. New Subscriber, Vinny 🇺🇸

[@annazeylik7428]

Funziona👏👏👏 Ho ni vostro video che guardo mi fa ricordare il mio papà e profumo di legna che avevamo in casa...

[@chamuco3135]

Best home made clamps I've seen so far

[@cat02791]

Best comment I ever read so far for this nice clamps..

[@salvistoscano]

Great Job. Great Video !! Best process for making bar clamps, that i have seen to date. Thank you.

[@homemadeinlviv8041]

Thanks! Glad you enjoyed it! ;)

[@EllinonEnosis]

If it's not available, not affordable, or doesn't exist....build it.... Best DIY heavy duty clamps I've seen...

[@Kccwoodart]

Best Idea I've Ever Seen. Thanks.

[@shookings]

I don't know if anyone else mentioned it, but I really appreciate the way you shielded your welds. Thanks.

[@homemadeinlviv8041]

Thanks! ;)

[@geosobservations9496]

Yeah that was a bit of awesome, not to mention the rest of the whole video...which was just wicked good...

[@billy19461]

The shielding protects his camera. That is all that it does.

[@geosobservations9496]

@@billy19461 adding the square with the exposure reversed to the video over the welding protects the camera...just curious...how does it do that...

[@geosobservations9496]

@@billy19461 🤯

[@georgekhaziran]

Bravo in every aspect of your work TWO THUMBS UP!

[@AAAlekseevi]

Мега мощность!!!!! Основательный подход!!! Молодец мастер, все на совесть, послужат ещё и внукам!!!!

[@kenyule6928]

Really liked the video effect used during the welding process.

[@nicobogaard2315]

These will serve your great grandchildren, undestroyable. You can press moisture out of wood with these things. Great job!

[@green_building]

This video is amazing.. The one that i like is when he start to weld he covered it to block the lights so our eyes not hurt when we see the video

[@IsraelAndersonShow]

Hoping that's sarcasm.

[@miguelangelcano8546]

I'm speechless A such nice work. Lovely to see it. Total Pro Well done.

[@MegaDimDik]

Great job! I'm just to do the same one meter long Bar-clamps for woodworking from a square tubes and angels, so this video is helpful for me! BRAVOS!

[@brian454454]

I’ve seen lots of clamp builds, this is hands down the best. 👍

[@suriarputhanputhan3144]

Cheap &best clamps very good idea

[@Loverboy_Bernice1977]

That's what i need! Thank you Bro. God bless you. 🎉🎉🎉❤❤❤😊😊😊

[@johnazzellino9700]

What a wonderful clamp also just as a wonderful idea with the screen whilst welding loved it and thank you

[@markotterby4297]

The best I've ever seen and indestructible!

[@krenwregget7667]

heavy duty, indeed! Better than anything you could buy. Great build as always.

[@mcbawangyakuznouxman9439]

Buying material v.s buy item's / eqpt

[@MaryAnnNytowl]

@@mcbawangyakuznouxman9439 much of it was scrap. The cost vs value of the project is well worth it!

[@aion2177]

Holly smokes! Very heavy duty indeed. Thank you for sharing such valuable content :)

[@jaysongerrald3958]

Awesome work!

[@shakejones]

Great video+presentation - quite satisfying watch! Well done mate - NEW SUB 🙏🏻

[@raulaguirre71]

Woao!!! Amazing. Great job man.

[@squareswing]

Hay Mr. "HomeMade" grate job for a kitchen table project! Can't wait for your new site "Fully loaded industrial shopmade".

[@benjenkins7131]

Awesome job, can see days and days of labour fabricating these up

[@MaryAnnNytowl]

Not that long. The longest part would be waiting for the primer and paint to dry, LOL! The sanding and grinding would be the next longest part. If you have a chop saw designed to cut metal (like this guy's miter saw, but for metal), though, the cutting is really quick. Welding is super quick, too. The longest part of that is cleaning off the slag and any spatter afterwards.

[@ekowahyuwibowo9494]

Istimewa pak boss, really durable and heavy duty..

[@gaspardois.reiscruz6654]

Oi.bo.dia.muito bom linda

[@jofloresz]

So, you do know that we can not go blind watching welds on video right? Lol ps, Great cap for that last stair!! Just beautiful!

[@CitizenAyellowblue]

Great build video!

[@geoffreykail9129]

Very Nice but a little heavy. Great clamping pressure. Great looking stair tread.

[@cignuselka]

MUY MUY MUY BUEN TRABAJO!!! FELICITACIONES Y SALUDOS DESDE ARGENTINA!

[@renanteesclamado9713]

Wowww...very nice idea and work...👍👍👍👍👍❤️❤️❤️❤️

[@unboxingreviewvlog7009]

Thank you for using a dark patch on the screen to minimize the welding effect to the viewers eye. Appreciate your caring. Thank you...

[@grahamh1067]

i'm pretty sure you're aware, but your computer screen is not capable of being bright enough to give you welders flash. the brightest it will be is the same as a white screen. it was nice to be able to see what he would see through his welders mask though, rather than just a white blob, that's likely what you meant anyways.

[@stevem815]

@@grahamh1067 I think it's a joke. But it's funny to imagine someone getting out their mask to watch welding videos, just in case.

[@grahamh1067]

@@stevem815 funny story, on the flip side of being safe while watching someone weld, i met a guy that thought it was safe to watch with a mirror, said that a mirror wouldn't reflect the UV light. i wonder if he can still see.

[@mountainviewturning5319]

Great looking clamps

[@marcoandreetto5855]

This is a very good job! Hi from Italy!!!

[@homemadeinlviv8041]

Thanks!

[@billyjohnesterhuizen6340]

BRILLIANT JOB!!!

[@janbalga7702]

Very nice work . You've saved a lot of money for buying original staples.

[@swartpeter5995]

Wow super cool welder eye saver for viewers thank you! Nice heavy duty clamps too.

[@jupiteroh2463]

Fenomeno master..Gracias.thanks..Perú-Amérisa Sur.

[@olivertaylor4779]

Brilliant job and clamps, you used an angle grinder with a guard and you weld a proper bead, then shielded to the welding. This is a great example how to do diy tools properly and film the making of it.

[@MaryAnnNytowl]

The only issue I had was that he seemed to be too eager to grind down welds, and that weakens them. That's just a pet peeve of mine from my decades of welding experience - never grind unless it must be done for the operation of what you're making.

[@johnshort1536]

Best clamps I’ve ever seen. Excellent job.

[@rohzpopper4922]

Much more cheaper than shop clamps. Compulsory if you do lots of woodworking. Nice job bro. Salam from Malaysia !

[@hatfieldmain]

Lucky coincidence I have been thinking how to go about making some Sash Clamps but not quite sure then saw this. A big thank you for taking the time and effort to post

[@frankwolthers2761]

Very very nice work ! I enjoyed it ! Thank you🙂

[@rhowlymiranda6126]

Nice Piece of work!

[@redjon4233]

I thought the last thing you was making was a stand for the clamps haha, im making some of these there great, excellent workmanship impressive

[@vickynicu8023]

Very nice and strong clamps

[@chrischaralambous286]

A brilliant idea and a great job.👍👌

[@mangoretheogre4178]

those clamps are awesome, considering what you started with, they all the more impressive, well done

[@jeanguycanuel3373]

Ingénieux, travail bien excuté. 👍🏻👍🏻

[@irvsjankybuilds]

that was pretty cool!

[@tonycardall7334]

Very sturdy clamps and very well made.

[@srinuvassirala7869]

Nice welding and clamps

[@РустамХамидуллин-ж3з]

МОЩЬ!!!! Потенциал не ограничен!!!

[@niklar55]

😊👍 I like the idea of using channel instead of Tee, as it will be more stable in use and almost impossible to tip over when loading with wood. Allso the increased metal cross section makes it less distortable. Very good neat work. 😊 10 points!😊 .

[@wiengs1480]

Good clame very strong press

[@donacianojuarez7717]

great job WHEN I GROW UP IWANT TO BE LIKE YOU

[@carloshumbertouzetaleon5304]

Hola, buenas noches. gracias por compartir sus conocimientos y de paso enseñar a reciclar creando herramientas muy útiles.

[@thenaim2370]

i love thats clamps amigo

[@silvergrizzly316]

HEY!!👋Nick, you don't let nothing stop you or hold you back my friend. You see a problem, you make it 10 times better!!! AWESOME BUILD!!! 👍👍 Jay.

[@homemadeinlviv8041]

Thank you, mate! :)

[@stanwagner4788]

Very good. Clever fellow.

[@gerjaison]

Beautiful work! Also brilliant video editing, love the ending where slotted the cover into the step and the music end, perfect timing.

[@homemadeinlviv8041]

Thanks!

[@sergioglinz9110]

Exelente día y gracias por estar siempre con los amos del reciclaje, saludos

[@aliciabarrios-]

Excelente trabajo ... gracias por compartirlo... Saludos desde Argentina 🇦🇷

[@rbi61]

excellent work

[@Dave-xh9oc]

Hello from Canada! Really enjoy your videos!

[@crappo8459]

Nicely done 😎

[@More-Space-In-Ear]

Excellent build 👍🏼😊

[@justinogonzalez7677]

Grande maestro!

[@patagualianmostly7437]

For a woodworker....your welding aint half bad! Most impressive.

[@das250250]

Great work

[@HiepNguyen-uz7je]

Hay quá bạn ơi cảm ơn bạn đã cho xem clip này, chúc bạn dồi dào sức khỏe để ra thêm clip mới

[@tyfutter6518]

Always a pleasure to watch this guy work!! Great job

[@franciscoortegaramirez8833]

Los mas potentes que he visto. Saludos desde Madrid

[@donbuche]

Superb! Greetings from Catalonia!

[@homemadeinlviv8041]

Thanks! :)

[@jilldalton725]

Wish I was you apprentice ! You are a very talented man.

[@enriqueangel532]

Que simplicidad de materiales y que fuerte...todos los que conozco usan torno.- Bs As Argentina

[@AnilDubey-qk5nb]

You are amazing!

[@jimgraham4673]

Nice clamps, very sturdy. You know, one can clamp so tightly as to force all the glue from the joint thus making a weaker joint.

[@homemadeinlviv8041]

Thanks, yes I know that. The main thing here is not to overdo it.

[@luisstanker1491]

Great HANDWORK

[@boneal4942]

Awesome job👍

[@rumah_enam]

PERFECT BAR CLAMP DIY

[@jbonegw]

Nice work. 👍

[@stasbiushkin7152]

That is awesome!! Friggggggin love those!!!

my friend. very nice. thank you. so much. be happy. bravo...

[@juancordovatomas7067]

Te felicito un excelente trabajo.Por favor me puedes decir donde compro las piezas q utilizaste en este proyecto,gracias

[@jeannoriega3409]

Félicitations monsieur pour ce que vous faites 👌jean de Belgique

[@zafarfayzullaev4107]

Very nice job boy!👍

[@marshallmurrell4583]

Great work!!

[@Cradley684]

Great job as usual, never got enough clamps, have a nice day !!!.

[@ericsissenwein3601]

I love the production of these. If you need a spare job you could work in a tank factory!! Awesome!!👍🏻

[@КасаиновЕ]

Жарайсын,колдарын алтын!!!

[@user-ak0917faking]

Гарна робота!!! Зроблено дуже добре !!!

[@Hunterhunter-ir9nz]

Great video. A little advice. You can use about half the pressure on the clamping of the boards, that you are using.

[@TonyT-lo2sz]

Impressive. Best home made clamps I've seen. Could be used for straightening tool.

[@josephdimaggio28]

Unbelievable job!!!!

[@eduardofranco8063]

Maganda sir ang clamp na gawa mo.