Homemade Mini Drill Press

[@tadeubotelho4410]

What a great job. I am researching to build a bench drill for a "watchmaker" with high precision, where there can be no more than 0.02 millimeters of play. Your project was the best reference I found. Thank you for sharing your knowledge. I wish you success.

[@serengytech]

Thank you very much my friend. I am glad that you liked my drill press. I made it for small jobs and precise drilling with small drills.

[@julielowe7462]

What a superb little machine tool, better than some manufactured ones I have seen, I think I will have to make this, it will be very useful for precision work - Julie

[@serengytech]

Thank you friend. I'm very glad you liked it. Stay on the channel, I hope I don’t disappoint you

[@julielowe7462]

@@serengytech thank you, I very much doubt you will, I think you demonstrate your craftsmanship beautifully, I don’t have all the facilities you do at present, but I will definitely be making this as soon I have an engineering lathe again, but I will also see if there is anything I can do with my current facilities by modifying the design, this is an excellent little machine, and not so easy to come by these days as a manufactured item, please keep up the good work ❤️ Thank you Julie

[@ganeshkodre7216]

Very very great beautiful nice and heavy bench type drill machine I like it.. greater skill. And man😊

[@serengytech]

Thank you friend.

[@ganeshkodre7216]

😊😊😊​@@serengytech

[@jozsefbalatoni8782]

Gratulálok! Nagyon jól sikerült! Különösen jó ötlet a finom előtolás megoldása és felszerelése. Nagyon tetszik!

[@serengytech]

Thank you. I set a shallow feed in order to make a mini milling machine in the future

[@ianvicedomini2648]

Sheer genius. Spot on awesome.

[@serengytech]

Thanks a lot

[@MetinTetiker]

Nereden bakılırsa bakılsın farketmez asıl olan kaliteli işçilik ile yapılmış olmasıdır.Tebrik ediyor,Benzer güzel çalışmalarınızı izleyeceğiz.

[@serengytech]

thank you very much

[@PnevmoFish]

Your mini drill press is the best I've ever seen.

[@serengytech]

Thanks a lot. that's why I made it, that I needed exactly that one. accuracy is important to me

[@shedmanx3640]

You’re a craftsman mate.

[@serengytech]

Thank you so much

[@Michel-Uphoff]

Very nice build, really well done! And that Phenolic for the headstock is an excellent choice, it's dimensionally stable, and very wear resistant. I use it a lot. And that's why this beauty deserves a better motor (there are some lovely speed controlled brushless motors with high torque at low rpm), a scale for the fine adjustment and a tiny drill vise.

[@serengytech]

thanks. this is interesting

[@Бахыт-щ5г]

Молодец автор, терпения и умения тебе не занимать !! Очень аккуратно и красиво , жму руку 🤝

[@serengytech]

Огромное спасибо за поддержку

[@FoxCrafts]

Хорошенький станочек получился. Особенно порадовала микро подача! 👍

[@serengytech]

спасибо. я в перспективе хочу сделать из него мини фрезерный станочек для этого и придумал микро подачу

[@gaco49]

This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

[@serengytech]

Thanks a lot

[@user-lsmlovely]

I've watched a lot of videos about building a drill press... There are some difficult processes, but it is simple and clean. This video is the best drill press DIY video that is perfect according to my standards. So, I clicked subscribe and liked. Please make more videos in the future.

[@serengytech]

Thanks friend for your support

[@cristianpopescu78]

Wonderful!This is art.

[@serengytech]

Thank you very much for your support

[@MarkKuehnel]

That is just too cool 😎 👌

[@serengytech]

Thank you very much Bro

[@dieter893]

Another masterpiece. Fantastic project and incredible execution.... Congratulations

[@serengytech]

thank you so much

[@kulebyakinjoe]

A VERY BEAUTIFUL DRILLING MACHINE

[@serengytech]

you're welcome. there's a lot more to come

[@devscraptoarts414]

I simply love your video style, truly refreshing and creative. 👍👍👍

[@serengytech]

Thanks for the support

[@СергейКолесников-ф5ь]

Изящное решение - высококлассное исполнение. Получил огромное удовольствие от увиденного. Большое спасибо Мастеру!

[@serengytech]

Огромное спасибо за высокую оценку👍

[@abdellatifkaabia9610]

Bravo bravo c'est très bien c'est tu fais une pour moi je te pailles c'est combien le prix merci

[@marcoaurelioarnaudcypriano5930]

Congratulations, a true work of art!

[@serengytech]

Thank you very much

[@seyedamirkhakzadian7794]

یکی از کارهای قشنگی که دیدم همین بود آفرین

[@serengytech]

Thank you friend.

[@edwinnasution5508]

I have to say.... you are genius

[@serengytech]

Thank you very much for your support

[@willhansen5321]

Great build incorporating both hardwood & metal & using a Foredom style die grinder. Excellent craftsmanship & thank you for sharing

[@serengytech]

you're welcome. Thank you for your mark

[@gasd6542]

Phenolic not wood.

[@jakemeyer8188]

Most excellent! That micro adjuster is brilliant. I very badly need a mini drill press like this, but the cheaper ones have horrific runout that makes then unusable for detail work. I don't have the machine tools necessary for this build, but I plan to design one up and test fit with 3D printed and off-the-shelf parts, then have the pieces cut by an online service for the final. I think if I design the individual parts to be easily and cheaply laser cut, I should be able to get it done on a budget.

[@serengytech]

Thank you very much. I'm very glad that you liked my project. Good luck in your endeavors. Don't forget to share the result. it will be interesting

[@abuyahya1043]

your a great mind and very nice work with a finishing l liked good job

[@serengytech]

thank you very much

[@herbi102]

Beautiful !

[@subhashyawar4527]

I like it , wery good

[@serengytech]

thank you very much

[@АлександрЛомовой]

Шикарно смотрится! Для полного счастья добавил бы подсветку и регулятор оборотов. По-моему для металла они великоваты.

[@serengytech]

спасибо. да есть в планах. тонкими сверлами обороты нормальные для толстых надо по меньше. у станка обороты регулируются только два положения. большие и чуть меньше. я не показал в видео

[@jimsvideos7201]

Very nice, the fine-feed mechanism in particular.

[@serengytech]

Thanks a lot

[@Сергей-д8о5х]

Класс! Один из лучших, что я видел.

[@serengytech]

Спасибо. Мне этот станок тоже нравится

[@yusufabdrahman592]

Good ii bossku 👍👍😊😊😍😍✅✅

[@serengytech]

Thanks a lot

[@slamlander3360]

A slightly larger table, with some tee-slots for proper work holding and you start to approach being a mini-mill. I actually see some real uses for that in a hobby shop. I also would have used a brass block, rather than the wooden block, for more rigidity. Oh yes, very nicely done.

[@serengytech]

Thanks. but it is not a wooden block. this is textolite. material impregnated with resin and compressed under pressure. very strong material.

[@Biokemist-o3k]

Absolutely wonderful my friend!!

[@serengytech]

thank you friend

[@Biokemist-o3k]

@@serengytech I need one of these badly. I wish you were close so I could ask you to make me one...I don't know where you are. I am in Pennsylvania.USA

[@robertravena]

if I didn't see this vid on you building it, I would swear it was factory made, truly professional finish, especially the fine adjustment wheel/knob for the headstock, aside from the mirror polished finish on many of the parts. I also noticed the run out on your headstock and drill bit looks to be damn near zero..Dremel tools have really wild and bad runout.. the mark of a really well made drill press is the runout or how close to centered without wobble the bit rotates. your drill press is VERY accurate. like it can be used in a professional setting

[@serengytech]

Thanks. It's great to hear such comments. Considering that I am building a drilling machine for the first time in my life. My goal was to achieve maximum accuracy and minimum spindle runout in order to drill with small drills. thanks again this is very motivating

[@serengytech]

watch this video you will like it kzbin.info/www/bejne/gIHZpHyGacyCqa8

[@synvalbaptistajunior6267]

Congratulations. perfect for crafts and printed circuit boards. gained another subscriber

[@serengytech]

Thanks, I'm trying

[@geoffanderson9440]

Very nice piece of kit. Well-done

[@serengytech]

Thanks

[@mathiasoliveira4125]

Maravilhoso, um artesão do aço. Parabéns!

[@serengytech]

Thanks

[@odairjosemayerthelau812]

Parabéns amigo ficou muito bacana sua mini furadeira!! 🇧🇷🇧🇷❤️💜❤️👏👏👏👏👍🥀🥀🥀🙏

[@serengytech]

thank you so much

[@user-dz1nm6ed4y]

Выполнено на отлично. Можно ещё добавить шкалу глубины сверления.

[@serengytech]

спасибо. Была такая мысль

[@bibekbose5676]

Great.. loved the video.. great work.. And it does the job too.. that's important

[@serengytech]

Thank you. I needed such a machine for my small jobs. had to make it from what was

[@antoniosemeraro9592]

Buon giorno lavoro perfetto complimenti

[@serengytech]

thank you so much

[@Tenteagora]

Trabalho fantástico, parabéns!

[@serengytech]

Thanks

[@peterlitwinczuk5403]

A thing of beauty.....

[@serengytech]

Thanks

[@mike_t_007]

So...THIS is whT machinists do for fun😎👍🏾

[@Mister.promoter]

Remember my words friend.... This video will change your future... Congratulations😀😀

[@serengytech]

Thank you. May it be so

[@weber3021]

Que Maravilha, gostei muito, Parabéns

[@serengytech]

thank you so much

[@loiquach1428]

Tuyệt vời

[@aipaip]

Nice job! This is awesome

[@serengytech]

Thank you so much

[@Techno0070]

Very creative and innovative👌👌

[@serengytech]

Thank you very much I try my best

[@sefasefa9049]

excellent workmanship. A work like no other in the world. I wish you could gift this to me. you would give the worlds to me

[@serengytech]

Thanks a lot,

[@sefasefa9049]

@@serengytech your welcome

[@sefasefa9049]

@@serengytech can you gift this to me😊😊

[@homemadetools]

Nice work. We shared this video on our homemade tools forum this week 😎

[@serengytech]

thank you very much for your support

[@serengytech]

give me a link to the forum I'm interested

[@homemadetools]

​@@serengytech Go to the url in my username, then click "forum". Let me know if you want a free premium membership (usually $69/year), and you can post your videos on the forum whenever we want. We have lots of YTers on board.

[@vagishgpatil3013]

Looks dso good

[@serengytech]

thank you very much

[@balloney2175]

Cool portable hole-maker.

[@serengytech]

Thank you. Right now I'm working on a modification.

[@balloney2175]

@@serengytech Welcome! I'll watch that one.

[@daawooltv4608]

You're Verry Teacher

[@serengytech]

Thanks a lot

[@christophehiro7950]

Beautiful job nice

[@serengytech]

Thanks

[@황외수-l2b]

멋집니다👍👍👍👍👍👍👍👍

[@serengytech]

Thank you

[@ivjik]

Beautiful.Like

[@serengytech]

Thanks

[@askanyful]

Brilliant 👍 loved it

[@serengytech]

Thanks a lot

[@askanyful]

@@serengytech I should be the one thanking...you have great skills.. God bless!!!

[@Med62KARD]

Meticulous, ingenious work...

[@serengytech]

Thanks a lot

[@jamesalsup9135]

Excellent!

[@serengytech]

Thank you for your interest.

[@seyvanbuokani1675]

woww very nice

[@serengytech]

Thank you so much

[@rock-of-road3237]

Классно!👍 Круто! 💪💯

[@serengytech]

Спасибо

[@92Amt]

Thanks

[@RixtronixLAB]

Creative video, thanks :)

[@serengytech]

you're welcome

[@92kvv]

Шикарный станочек. Лайк однозначно.

[@serengytech]

Спасибо за поддержку

[@vit5556]

Восхитительно

[@serengytech]

Спасибо

[@eddietowers5595]

Wait, the head is made of a piece of wood?! It looked nicely painted metal. Cool build

[@serengytech]

it is a fabric-based laminate. very durable material. Thanks

[@kolesGites]

Its a cotton and formaldehyd-fenol resin.

[@serengytech]

​@@kolesGites yes probably so

[@HNIZAR45]

Nice work

[@serengytech]

thank you so much

[@Олег-с3д]

Это великолепная работа! Браво!

[@serengytech]

спасибо

[@restorationofdirty]

Beautiful 😍🌹

[@serengytech]

thank you very much

[@justin_704]

Impressive

[@serengytech]

Thanks

[@jimphubar]

Very cool. Subbed.

[@serengytech]

thank you very much

[@Ger4ik1a-21]

Прекрасная работа. С чего взята зубчатая рейка и шестерня?

[@serengytech]

Спасибо. Рейка и шестерня от станка тв 4. Пришлось рейку распилить вдоль

[@mission_possible2016]

Wow ❤️

[@serengytech]

Thanks

[@МихаилСтаростин-ы9ф]

Красота!

[@serengytech]

Спасибо

[@Shimaneko227]

見事な小型ボール盤が出来上がりましたね。速度調整さえできれば完璧だったのですが。

[@serengytech]

Thank you friend for your support. There is such an option.

[@omsingharjit]

The Truth is , you need Drill press to make drill press because you need perfect 90° Drill for its shaft at first place .

[@machinist_matt]

Nice build! 👍 What is the head made from? Tufnol?

[@serengytech]

Thanks. this is textolite. compression molded material

[@martinpanev6651]

Hello, not My MiniCrafts but, quoting one of his other comments, its made out of "Textolite". He says "material impregnated with resin and compressed under pressure. very strong material." (Edit): After doing a little bit of research it turns out that textolite is another word for micarta/glass impregnated resin/fiberglass/compressed resin + wood. It can be made out of a variety of materials but is basically wood micarta. It looks like in the 70's they made countertops with it! Love your channel by the way :)

[@Kendiatölyemm]

Harika işçilik

[@serengytech]

Thanks

[@georgk4207]

The Idea is huge, but sometimes i think how you the parts build it be to Danger it self to hurt, that one Part learn the fly away and that is Danger for all who be in the line.

[@serengytech]

Thanks

[@georgeclements2742]

Sheer genius. I feel for your troubled country.

[@serengytech]

thank you very much

[@rafalg.6901]

What materiał have you used for the drill press body (the red part)?

[@serengytech]

textolite

[@rafalg.6901]

@@serengytech It looks very nice when painted and seems to be quite easy for machining.

[@misha_pankof]

Красиво!

[@serengytech]

спасибо

[@sakibian01]

I hate to say it,but,i need one.

[@serengytech]

Thanks for support

[@sakibian01]

@@serengytech I'm serious,can i have one? And how much it would cost?

[@ПавелПольяновский]

👍👍👍

[@serengytech]

👍

[@kmalnasef1512]

if I have a lathe I'll do all the internal pats from raw material.

[@serengytech]

Thank you very much for your support

[@이덕재-j7q]

팔생각은없나요? 잘만드셨어요

[@serengytech]

Thanks

[@dejojokic5276]

👏👏👏👏👏👏

[@serengytech]

Thanks

[@ValDer1966]

Круто.

[@serengytech]

thank you very much

[@Bondadz]

What type dc motor ? It has a massive torque for small dc motor

[@serengytech]

This is a DC motor from a fax

[@СаматФайзуллин-к1о]

Очень хорошо . Единственный минус- ( мое мнение) - стол сверлильный консольный.

[@serengytech]

Спасибо. Почему ты считаешь это минусом? Его можно отодвинуть и пользоваться основанием

[@СаматФайзуллин-к1о]

Да нет, всё отлично, просто крепление чего-либо в одной точке мне всегда кажется с точки зрения устойчивости к вибрациям маловатым. Только и всего. Удачи!

[@AlexandreSilva-xn7bs]

SHOW !!!!!!

[@serengytech]

thank you

[@dgin09]

Это все конечно хорошо, но токарный станок+ куча деталей с алиэкспресс. А как самый первый сверлильный станок делали? Тоже был алиэкспресс изобретен и токарные станки валялись под каждым забором? Только литье, ковка и напильник! Сможешь сверлильный станок собрать?

[@serengytech]

Если будет такая необходимость смогу и даже без напильника. Напильник сделаем по ходу. А вообще видео не об этом. Но я рад что тебе понравилось. спасибо

[@jurajzvolensky7857]

Priam profi výroba

[@serengytech]

thank you so much

[@indianempire8908]

Running on 24volt or 18volt???

[@serengytech]

18-24-36

[@indianempire8908]

DC Moter nam??😢

[@serengytech]

watch the video at 36 seconds. there I show the name of the engine

[@РоманМихалюк-ь5щ]

2:50 - у мужика стальные яйца, но руку потом, когда-нибудь, намотает при таком подходе к технике безопасности.

[@serengytech]

это все от лени. на самом деле станок очень слабый по этому сильно не заморачивался. спасибо учтем

[@РоманМихалюк-ь5щ]

@@serengytech Всё клёво, но момент ужасный. У меня сколько раз так вырывало и даже до крови, и всё равно так сверлю! Прислушайтесь к моим словам !!!!

[@serengytech]

@@РоманМихалюк-ь5щ головой понимаю)) но когда азарт. ну вы поняли, спасибо

[@РоманМихалюк-ь5щ]

@@serengytech Тоже думаю такую сверлилочку смастырить... от чего реечная пара (рейка и шестерня к ней) ?

[@sandrokakhniashvili4193]

How can I buy a mini drill and at what price, if you don't mind, write to me

[@serengytech]

Unfortunately I don't sell anything right now. possibly in the future

[@greasyhamsandwich4691]

used the drill press to make a drill press

[@serengytech]

it's all about the size. from simple to complex. Thanks

[@kamankamimalik]

How to purchase this machine

[@serengytech]

Thank you for your interest. but I haven't thought about mass production yet

[@СташенкоСергей]

Не хватает Т-пазов на столе.

[@serengytech]

спасибо. для моих целей он не нужен. но всегда можно доработать