Homemade plastic welding

[@cp1855]

Thank you for video and all the best with new name.

[@creativejunior7060]

Thank you so much..

[@evelynsarangaya5631]

ka maayo man mohimo ana oy 👌

[@creativejunior7060]

Salamat kaayo te.

[@black.pandora]

thank you for sharing bro...

[@creativejunior7060]

You can use computer power supply also for your 12volts supply.. Thank you so much sir

[@dgfarm.dgfarm]

thankyu guys,... very usefull

[@creativejunior7060]

Thank you so much because you appreciate my homemade plastic welding..

[@wilfrednepales3663]

Good day po mas ok po ba kung mas mataas ung amper pero 12v padin? Nka bili po ako sa shoppee nang stemple na nicrome pwdi po kaya un ang gamitin ko sa 12v 2amper padin po baka po kc nd mag baga ung wire salamat po more power po sayo

[@anuragalvino7630]

Best ever video made... Great work.. keep it up... Tip for u is go for best video making the background and light settings... 😉And rest is well and good...

[@creativejunior7060]

Thank you so much.. I will follow your tip so my up coming video will be much better

[@CACIQUEHGC]

Hello, it will work if you use a paper clip? or a thicker wire?

[@creativejunior7060]

Yes. You can use thicker wire but you need to higher the ampere output of the power supply sir.

[@CACIQUEHGC]

@@creativejunior7060 Thank you!

[@azharazhari9233]

Sir kitna volt se kitna volt tak or kitna amp se kitne apm tak work kar sakta hai...

[@BecepSyaefudin]

Pake adaptr casan samsung bisa ga

[@awaluddinkandossong]

Bisa pakai adaptor AC 9,8V 1,3A?

[@wilfrednepales3663]

Good day sir anu po problema nang ginawa ko 12v 2amper po pero ayaw po uminit ung gamit ko nicrome wire ung nabili ko sa shopee 0.8 ung size

[@creativejunior7060]

Baka po hindi transformer type ang adaptor na ginamit nyo sir kaya nag kacutoff ito.. Please try nyo po ang computer power supply sir. Pag may computer power supply napo kayo. Ipag connect nyo po ang green at black na wire para mag power on ang computer power supply tapos. Yung black at yellow naman ang gamitin nyo para makakuha kayo ng 12volts supply.. Dugtungan nyo lang ng mahabang wire (mga 2 meters na wire) yong yellow wire para hindi mag auto cut off ang power supply pag tilagyan nyo ng nichrome wire ang black at yellow. Please update nyo po ako pag nag function na. Salamat po

[@guamballer5393]

How many volts and amps is your power supply?

[@creativejunior7060]

I used 12volts with 1.5 amps powers supply for my diy plastic welding sir.

[@guamballer5393]

Creative Junior is that 12volts output 1.5 amps output?

[@pepelcev]

I make the same one step by step watching your video. Problem is volt drop after inserting staple. Only get 0.5v and is slowly increasing. I used ac to dc adapter 12v 4amps. Do you know maybe whats the problem?

[@creativejunior7060]

I think the problem is your power supply.. Please try to use computer power supply.. Computer power supply is much better.. Use the yellow and black wire of the computer power supply.. In my other channel (mr.kumpuni) I have a video making a homemade plastic welding using computer power supply.. Please visit my other channel (mr. Kumpuni) so you will see my video using computer power supply for plastic welding

[@pepelcev]

@@creativejunior7060 Thanks, i Will try. Thank you again.

[@creativejunior7060]

Did you use nichrome wire? Try to use nichrome wire from an old hairdryer for staple. Thank you so much. God bless you

[@pepelcev]

@@creativejunior7060 Actually no. I ordered stainless steel wires from China.

[@mehryar78]

Check your nail thickness

[@giseljohnpantaleo3642]

Sir pwde po b 14v?

[@creativejunior7060]

Pweding pwede po basta 2 amps na power supply ang gagamitin mo.. Mas maganda po if power supply ng computer ang gagamitin mo boss kasi mas heavey duty ito

[@giseljohnpantaleo3642]

Salamat po

[@giseljohnpantaleo3642]

Sir bkit ganun 14v na ung gamit ko pero ang uminit den my 12v din aq 2amp hndi ganun kainit?

[@vikasrattan2806]

12 volt adapter lekin kitne Ampere tkk ka lein?

[@creativejunior7060]

I used 12v 3 amps adaptor but you can use computer power supply because its works much better. I have other video how to make plastic welding using computer power supply. I hope you will like it.

[@christianalcantara5193]

Sir pwede ba 12v 5amp?

[@creativejunior7060]

Pweding pwede po lalo na pag transformer type ang power supply nyo sir.. Pwede din po power supply ng computer ang gagamitin nyo sir

[@maharajraj1144]

What cost this

[@mamahaah9412]

Komponen apa saja itu pak untuk membuat alat itu

[@rico3384ut]

Anong charger ang ginamit mo? Ilang volts ? Meron nyan sa lazada or shopee ?

[@creativejunior7060]

Ang gamit ko po ay 12volts na adaptor pero mas maganda po pag power supply ng computer ang gagamitin nyo. Yong yellow at black ng power supply ang 12volts. Dugtongan nyo lang nang mas malaking wire katulad nang nasa extension wire. Tapos ang wire naman na umiinit ay nichrome wire po. Makukuha po ang nichrome wire sa mga hair dryer. Galing lang po sa junkshop ang ginamit ko sa plastic welding sir.

[@karunasinghe1]

කඩේ ගන්න තියෙන ස්ටේපල් වලට ඕන කරන වෝල්ට් සහ ඇම්පියර් ගනන කීයද කියන්න පුළුවන්ද

[@rcyalcoendra637]

wнaт ĸιnd oғ ѕwιтcн dιd yoυ υѕe?

[@creativejunior7060]

I used push button switch but you can also use any kinds of switch sir.

[@mamanjubly]

Not working sir

[@creativejunior7060]

It really works sir. You can use computer power supply, switch and a nichrome wire.. I have some video how to make it and it so easy to follow

[@sayedmurtazahussaini5434]

Not working

[@creativejunior7060]

It really works sir.. Promise. I can prove it to you sir..

[@davidruiztygre5299]

Esto no sirve para nada XD ya lo intente

[@creativejunior7060]

I use 2 ams 12volts power supply sir. But it you use computer supply is much better.. You can do it sir