Homemade RGB led Controller | Making RGB LED

Making of RGB led mixer or controller for rgb leds.
the circuit its in video and for making the circuit you need npn transistor 3x 2n3904,3x 220kohm resitors,3x 5kohm pots and usb male connector,
this circuit can be used for ordinary rgb leds and for rgb led strip.

[@Hacktuber]

What you think hacktubers,am I explain the circuits good?

[@gurkiratsingh2694]

yes bro you explained nicely

[@visionblogs186]

yes brother your explanation is awesome

[@Hacktuber]

Thank you

[@Hacktuber]

Thanks man

[@Hacktuber]

Thanks man

[@jenntek.101]

I finally found the time to finish this little project up. I have a short string of 12v RGB LED's. Works great. :) Thanks Hacktuber!

[@visionblogs186]

Teacher: what is impossible Student:get a heart from hacktuber

[@eerdem79]

👍👍👍Awesome👏👏👏 It is great to see this RGB led control circuit while I was searching it for a week. Thanks, well appreciated.🤗🤗🤗

[@Hacktuber]

No problem

[@gurkiratsingh2694]

bro love from India 😍😍

[@techtronics7685]

First

[@visionblogs186]

10 th like from me

[@xZHARKONx]

From Mexico City I send my congratulations, thank you very much! :D

[@vectoryt6145]

The best

[@attackaffection5444]

Nicely explained dude!

[@technicaljourneywithpuneet]

Beautiful 👌

[@gunnarallgottsmann]

Yep, again a very clear explanation of a clever circuit, that can be used to learn or amusing yourself. Very well done, brother, I enjoyed your video 100%. Have a wonderful, prosperous and blessed future, brother. Stay safe, healthy, strong and happy 👋 💖✌️🍀🍀🍀❣️

[@Hacktuber]

Thanka for kind words,stay safe also

[@visionblogs186]

awesome video brother amazing concept.

[@dhineshd94]

That's cool 🔥🔥🔥

[@adityafere4345]

Awesome!!

[@visionblogs186]

i am not first, i am not last, when notification comes i click fast...

[@realfakibazz9737]

Awesome 👍😊👌 bro keep it up and love from BANGLADESH 🇧🇩🇧🇩🇧🇩

[@mdomarfaruk4868]

Love from Bangladesh 💕

[@tech6279]

Nice and good work welcome

[@slgadgetman]

👍😍

[@kshitiznavediya9470]

It clears my fundamental

[@ateetpatil4835]

You and electro boom are asom

[@rohitexperiment5255]

Super rrrrrrrrrrrrrrrrrrrrrr 👌❤️👌❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️ video

[@AmansLab]

I think red led is not getting full current looks very dim than blue and green

[@gunnarallgottsmann]

It’s the long wavelength of the red colour. Have a great time. Blessings to you and your ✌️🍀❣️

[@mrlcosmoslensmen17]

🥰🥰🥰🥰

[@shinsynchri2769]

Thank you for that, i love your vids but can you make another one like that but using MOSFET for high current?

[@ernielazdins1348]

This is a great project. Thank you for sharing your fine work. I am not a techie so learning is slow. I want to control RGBW 12volt strip led. If I make a board with 4 of each components will this work and can I input 12 volts instead of 5 volts. Please advise. Regards Ernie

[@electronic7979]

Nice

[@MrDarkDragone]

Are the transistors just there so no current will flow once the potentiometer is turned down far enough? Could they be removed and have the leds just on the potentiometers?

[@Hacktuber]

Without transistors you gona burnout potentiometers

[@stockvalayt9861]

👍👍👍👍👍👍👍

[@ateetpatil4835]

Bro can I use the same circut for big led strip with 12v 1/1.5A

[@drowrghWasabi]

Amazing. Will this work for a 24v RGB strip? How will the resistor values vary? Thank you very much.

[@MegaTechno]

Yes it will work.

[@fatihfajral]

👍

[@friendsvisionphotography]

Making a 100watt smd led driver sir..

[@parkour_parker7519]

Could you use a 2n2222 transistor?

[@Hacktuber]

Yes you can

[@kay-vo9fd]

Wow Iike

[@divakarakrishnab9169]

OMG👍

[@prembhai2944]

self blinking by ATtiny13 or xxxx?

[@ParnellBromley]

I have a common cathode RGB LED, any way to wire it so I can adjust the positive?

[@bongboi07]

I am from India

[@maikmario71]

Hello, good work! Can I also operate this with 12v? 

[@Hacktuber]

Yes, of course if led strip is 12v

[@lukogs]

Does this work for the 1m rgb strip? I'm trying to do with thumbwheel potentiometer instead of the knobs.

[@Hellsong89]

Not sure about how much this circuit eat away power or how long it can support. Its not much of how long the strip is, but how much current draw it demands. You can find that out from the manufacturer of the strip or trying to find the datasheet for the led element it self, but for the potentiometer long as its same value it should be fine, just find data sheet for knob version he uses and one you plan to use, compare and look right points. Least this is my understanding

[@amitsaha8445]

It will convenient for viewer, if you mention parts name/capacity on the screen.

[@anees607]

India""s

[@wanikmal123]

I really hope if u can give some link to buy :)

[@jumbo999614]

Does it work with RGB 5050 60Leds /1Meter Model with 12V?

[@joshuaprobably852]

I bought underglow for my car, how could I learn which of the 4 pins in a connector are ground and which are red,green,blue?

[@lilolopez7149]

Hello

[@kevinoclock]

Is it possible to replace the 3 potentiometer with a single switch to cycle between different colors ? without using microcontrollers

[@Hacktuber]

The circuit work without IC,cycling thrue colors only with pots

[@Akturk77]

Usb rbg mixer

[@harshkhinwasara8417]

Can u make wireless charger for any phone which even doesnt support it...plzzzz..can copper coil will work???

[@ghosty2008]

THATS IMPOSIBLE

[@itzalu]

Can this circuit handle 0.40ma?

[@friendsvisionphotography]

Make a 💯 watt smd led simple constant current circuit driver sir plzzzzz....

[@user-mw1tn8me5z]

If you need constant current you need to use mosfet, check circuits on web, make calculations and you're done

[@mayankpradhan5327]

Can it work with 12v

[@wittyrestro3284]

which type of wire you are using to

[@jenntek.101]

magnet wire

[@bgsxoll9438]

Where are you from?

[@wanikmal123]

Can i request the circuit diagram and wiring for the rgb wire

[@BOTheSB]

and I have the same watch as yours

[@user-td8ut3wn6x]

Privet, est' po ruske perevod?

[@Hacktuber]

Sorry

[@nothingBut0332]

Nice