Homemade table saw mini with motor 775 - Creative Ideas With Motor DC

#x_creative #motorDC
Homemade table saw mini with motor 775 - Creative Ideas With Motor DC
This is a video tutorial to make table saws from the motor 775
A table saw with a small size that makes you easy to move and work anywhere
It is used for sawing wood with a thickness of less than 15mm
💪💪💪💪💪
The items used:
- DC Motor 775, 12V, 18000rpm
- 775 motor base
- M10 saw blade holder, 5mm shaft
- Table saw blade 4 inch
- Power supply 12V, 20A
💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
Subscribe for more video : bit.ly/2xB6lfL
💪💪💪💪💪💪💪💪
Thank you for watching!
Like, share, comment and subscribe if you enjoy it.
💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
View more video in: bit.ly/39Var0A

[@viswanathanramakrishnan7613]

The following details are needed from you:- 1. The MDF board you have used I need the dimensions, 2. The power supply Ampere and voltage. After witnessing your video It makes me to try and fabricate one such for my hobby work. Good video.

[@salimkattippara1206]

One of the best video .... thanks bro

[@lucasmorales2763]

mandou bem 👏👌

[@mamseven4395]

Good idea

[@jorgeb509]

what is the measurements of the woods used in the project. Thank you

[@caotrungkien430]

Wow, amazing

[@sampathkumar3018]

Good one ! The adaptor where can i get ? I searched and got different type of adaptor which can be used with 10 mm chuck only. This adaptor link and description i need

[@yaninalugoavalos9427]

👌🏾👏👏

[@queluuthi1281]

Nice👍👍👍

[@mohsinkhan-uj2tj]

It is amazing, Brilliant Sir very easy and simple method to make saw like that. thumbs up for your work. Thanks Sir. Love from Pakistan.

[@diymonk6002]

supper idea, i should make this. Thank you

[@daiane7140]

kzbin.info/www/bejne/fnK1iaOfiZp_otU

[@renato6781]

Boa noite amigo vc vende essa mesa de corte sim ou não por quanto

[@waiyanhtet2022]

Looks very nice and cost effective. But I have a question. Can it cut properly natural wood like teak and ironwood planks?

[@abdaziz425]

Saya juga menggunakan motor 775, mata pisau kenapa bergetar ya pada posisi rpm tinggi

[@truongcyantruongtruong7250]

cho e 5 cai dau chuc nhe

[@DjHimanshuMixer]

Motar m jo chuck lagaya hai vo kon sa hai

[@imp6990]

I need some help please. I bought 12V 795 Motor and power suply is 12v 10A, and the motor does not have the power to cut a 2cm thick wood. What is the problem? please help me, thank you

[@Spiderkoviper]

795 has the power over 200W. You should use supply 12V 20A to use it the best way. Thanks

[@ahmadezany2929]

Can't use 7inchi blade

[@renato6781]

Boa noite amigo vc vende essa mesa de corte

[@hbaibbhai3355]

Vao

[@muhamadzaenalanwari3736]

where can i buy a 18000rpm dynamo?

[@pajero910]

Please info the power supply specification..

[@Spiderkoviper]

Info the power supply: Input voltage : 220V Output voltage : 12V - 20A

[@pajero910]

Wow..20A? Well..noted. thx

[@thilankavinda2796]

Hey bro,I have a/c motor which is used for sewing machine motor,and I want to use for this kind of project.But I cant understand without belt and pully it can harm to your motor,Can I use without belt and pully(direct drive from motor?)

[@Spiderkoviper]

Hi. The belt and pully be used to change torque of the motor. If torque of your motor enough high. You can use direct motor.

[@thilankavinda2796]

@@Spiderkoviper Can it cause for overload of motor when stuck? that can burn motor windings?

[@sampathkumar3018]

Adaptor 1.03

[@Thevinh72]

Can you ask me: How much Ah does that 12Vol beehive source have?

[@Spiderkoviper]

Current = 20A.

[@Mikado279]

pourquoi ne pas donner de dimemssion des planche?

[@sarmanjogal3626]

Online liya he kya saman

[@bakolpitik774]

Modal habis berapa.bang

[@karyaputra9435]

ask for a power supply purchase link please

[@bhupendradesai3402]

Box size please n bled lock name or from I buy blad lock.powe supply if I give 12vlt batter from out side that can I do.i m not engeener but common interested wiver.please reply for further subscrbtion.

[@Spiderkoviper]

The size of the box depends on the size of the wood you want to cut, regardless of the external or internal power source.

[@TechNcookBook]

Part details please

[@leknarong4121]

อออ

[@wasusipitukkiat9152]

How much size box

[@albertoperugino3145]

Le misure del legno non ci sono?

[@wonderingartist]

I used the same motor but it cant even cut 8mm ply. Also it doesn't run on most of the adapters i have. Runs fine only on 12v 2amp battery. I have tried 12v and 19v adapter, same result. Can you help extracting maximum power from it ?

[@azlyaziz3029]

i think u may need 12v with 5amp power.. but plz do some research on how much watt does that motor needed..

[@sandsbhatre]

Try another adapter with high amperes, also there are 2 types of dc775 motors in market, one is with thin copper winding inside and other is this one in the video(approx 150 price difference in both)

[@niravanand4751]

Send me one pic

[@ggshwhgw2438]

How many, w? that moder powder

[@daiane7140]

kzbin.info/www/bejne/fnK1iaOfiZp_otU

[@dwiryandi7377]

Simpell

[@muhamadzaenalanwari3736]

where can i buy a 18000rpm dynamo?