2006-2011 Hyundai Accent Valve Cover Replacement

[@HomeownerRepair]

🔧BUY New Valve Cover and Gasket Kit: amzn.to/3XLOIlv 🔧BUY 10MM Deep Socket: amzn.to/3m6U7EY 🔧BUY 3/8 Swivel: amzn.to/3koJ0Hb 🔧BUY 3/8 Rachet:amzn.to/3kesxFd 🔧BUY 3/8 Extension: amzn.to/3maqqmB 🔧BUY RTV Gasket Sealer: amzn.to/3Z33wMx

[@packattack1762]

Dude, literally did this in 20min! Thanks for the video

[@HomeownerRepair]

Yeah it is an easy job on this car. They dealership would have charged you hundreds!

[@HomeownerRepair]

This video will show you how to replace the valve cover and gasket on your 2006-2011 Hyundai Accent with the 1.6 L4 engine. It is common to have the valve cover gasket leak over time, this is a general maintenance item that tends to wear out over the years. 🔧BUY 10MM Deep Socket: amzn.to/3m6U7EY 🔧BUY 3/8 Swivel: amzn.to/3koJ0Hb 🔧BUY 3/8 Rachet:amzn.to/3kesxFd 🔧BUY 3/8 Extension: amzn.to/3maqqmB 🔧BUY RTV Gasket Sealer: amzn.to/3Z33wMx Subscribe to our channel: kzbin.info... Email Business Inquiries to: [e-mail]

[@mistersadaimusic]

Appreciate the videos man. Got a bunch of tools together to prolong the life of this beater. This is my next project.

[@HomeownerRepair]

Glad I could help

[@nathangiles6654]

Thanks mate. Your videos are super helpful! Hard finding videos for my 2011 accent.

[@HomeownerRepair]

Glad to help!

[@AtlanticFun]

Thx bro you are a life saver

[@HomeownerRepair]

Glad I could help you out.

[@royhess540]

I appreciate the help to do this by my self.

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you hw to replace the valve cover gasket on a Hyundai Accent.

[@AtlanticFun]

Thanks buddy looks ez. Away I go.

[@HomeownerRepair]

You're welcome, glad this video can help you out.

[@CheddarBayBaby]

Hey thanks! Just watched your video on replacing the spark plugs. I think I’ll do this next since I had some oil in there too.

[@HomeownerRepair]

It's an easy job on this car.

[@Mr123456789oussama]

Thank you for this nice video

[@HomeownerRepair]

Thanks for tuning in, glad you liked it!

[@Onlybhstrpes]

Great vid/tips... ESPECIALLY your "ya don't have to crank it..." notes, as many of us over-tighten gaskets, only to cause gaps in the gasket, destroying it's fit and making the oil leak all over Main's best lobster joints. 😅

[@HomeownerRepair]

lol..Thanks for checking out our Hyundai Accent auto repair video.

[@TJsVette]

If you want to tighten to specs it's 72 to 80 inch lbs which equates to around 6 to 7 ft lbs. Tighting sequence is start from the middle and work your way out. Great video tho.

[@HomeownerRepair]

Thanks for the info!

[@chuckb.5076]

Nice job! Great video. Thanks

[@HomeownerRepair]

Glad you liked it!

[@marlonpamplona1839]

Thank you.

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the valve cover on a Hyundai Accent. Have a great day!

[@andreflieger6330]

Great video. Would like a link to the new valve cover please. Don't want to pay around $300 for OEM but are the $50 dollar ones any good? Not afraid to tackle this now.

[@HomeownerRepair]

Here you go BUY New Valve Cover and Gasket Kit: amzn.to/3XLOIlv

[@SajaHasan-c4o]

Hey !! Great video did one on my sisters car yesterday but couldnt use the RTV due to unavailability around me is that ok ?

[@HomeownerRepair]

Thank you for watching our Hyundai Accent auto repair video. You should be okay. Here is a link to the RTV on Amazon if you want to order it: amzn.to/45EdoAp #ad

[@faezalaziz932]

Have same engine, what the torque setup? well if you also have the video how to change the timing belt would be nice . and thank you for the videos.

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the valve cover on a Hyundai Accent. We also have an auto repair video the shows you how to replace the timing chain, here is a link to it: kzbin.info/www/bejne/l5ndfoiii556l9Usi=uBvKpN81Yxvz9h-i

[@YouStink86]

Thank you sir I appreciate you

[@HomeownerRepair]

You are very welcome

[@jamespowell4950]

You have demystified so much for me. Is there no torque spec needed and I seen a video where the guy put sealant in the top of the valve cover where the gasket sits in is that not a good idea?

[@HomeownerRepair]

You can probably pull the torque specs off the internet. I have been doing this for so long I just know how snug they should be.

[@donnieporter7890]

Thanks for the vid just bought super clean 2010 sedan w/ 80k for 1500.00 and the valve cover leaks bad so hope this is the only leak

[@HomeownerRepair]

These are great little cars, pretty easy to work on too. Most of the parts are cheap. Hope this auto repair video helps you out with your new Hyundai Accent.

[@donnieporter7890]

@@HomeownerRepair i really appreciate the video got it done very easy thank u

[@teramagterefe6038]

GOOD job

[@HomeownerRepair]

Thanks for watching.

[@byayala2292]

Hello friend, I lost one of the valve cover screws, do you know what the size of the screws is? I would greatly appreciate it

[@HomeownerRepair]

Not 100% sure. I would remove another one and match it up at your local hardware store. Your local Hyundai dealer should be able to get one for you. Hope this helps you out. Have a great day!

[@leosbanyhernandez4939]

Easy to do because you know how do it

[@HomeownerRepair]

Replacing the valve cover and gasket on a Hyundai Accent is fairly easy to do. It a fairly simple auto repair, if you follow the video you shuld be okay.

[@tulani99]

I have all the bolts off but the cover won’t budge. Should I put a screwdriver under the lip?

[@HomeownerRepair]

You may have to tap it with a rubber hammer to break it free. Hope this helps you out!

[@tulani99]

I’m doing this in real time😂. Thanks for prompt response …

[@HomeownerRepair]

@@tulani99How did you make out?

[@tulani99]

😢not so great. I couldn’t get the cover to budge. I tried the rubber hammer, then I tried prying the corner and it moves slightly but I was afraid to break it. I ran out of day light so I will try again tomorrow

[@tulani99]

I finally got it. I had missed one bolt on the left, it was covered in debris but I was able to replace the gasket and took the car on a successful test spin - thanks again for your tutorial video

[@deadlyarts1]

I need your help!! I have a 2009 Hyundai accent gls and it won't start. No sparks are coming from the spark plugs,. I need your advice

[@HomeownerRepair]

Just saw this did you get it fixed.

[@wayneyang1155]

I came here because getting the bolts out is obvious. But after all bolts out how to loosen it? Rubber mallet?????

[@HomeownerRepair]

if you GENTLY tap it it should come loose. Did you figure it out?