Jeff, For me, the fact that you do not edit / cut your videos when you encounter a problem ( like with the height of the transition strip) gives a lot of credibility to what you do. In reality, things are not always perfect the first time. Thanks & have a great weekend 👍
@HomeRenoVisionDIY5 жыл бұрын
Cheers Peter!
@-myatlanticblue-36365 жыл бұрын
100% agree - he's not afraid to illustrate the challenges encountered in real situations.
@michaelmoody91455 жыл бұрын
Agreed. Most people edit out the small stuff and only show the major steps. I work at a Lowes and have already started sending people to his channel to watch his flooring installs ( I work in the flooring department)
@JonesKnows5 жыл бұрын
SO TRUE!!
@FerrisBueller-sj5sc4 жыл бұрын
The ugly truth. Appreciated⭐⭐⭐⭐⭐
@intertubicular4 жыл бұрын
I was in on the laminate floor craze when it first started in the mid 90's. PERGO was the original laminate floating floor system sold in the U.S. I was an endorsed PERGO Installer for Home Depots. I installed thousands of these floors. Back then we didn't have snap together flooring. It was all glue together which required special ratchet straps that went from the start coarse of flooring to the course you were gluing together. It made the installation process more timely but I believe it was a much better product. No seams over time and the melamine and aluminum oxide laminate finish was pretty darn tough. As far as installing transitions , I cut the track and transition to size. Snap the track onto the transition and simply adhere both to the sub floor with Power Grab construction adhesive. Works like a charm and your not fighting trying to squeeze the transition tongue into the flimsy mounting track screwed to the floor. However you can certainly do it as you showed. I'ts just a pain in the ass. Personally I think doing it my way makes a much more secure transition as well. Never had a call back on a transition failing.
@bobohacker50373 жыл бұрын
Would liquid nail suffice?
@HomeRenoVisionDIY5 жыл бұрын
If you have a question about transitions or flooring or anything, feel free to ask. I will do my best to answer them all. Cheers!
@newdroidexp5 жыл бұрын
Home RenoVision DIY great vid like always! We need a video on how to install laminate flooring for stairs! Cheers
@thechileacademy48005 жыл бұрын
My builders flooring trade used construction adhesive and now they squeak like crazy. They said “that’s how it supposed to be done”....
@boulderco135 жыл бұрын
Does that reducer work for a basement floor finished with DMX + OSB + carpet/laminate to a bare concrete floor? Thanks!
@JimGravina_ShineDC5 жыл бұрын
This was my video suggestion! Thanks for making this video!
@MrNncon5 жыл бұрын
Longest side of the room correct? Any tips on spacers? I think i missed a beat i bought one of those plastics kits with the sbar. Rubbermallet is that important ive done a few jobs but its been fly by night im upping my game
@suburbanhobbyist27523 жыл бұрын
I've said this before on your videos, but you are by FAR the best construction guy on KZbin. Clearly you have decades of actual experience and you do a great job explaining all the little issues that always come up. Thanks!
@righthook274 жыл бұрын
When trimming back the flooring at the transition, I find that using my small circular saw to cut as much as possible and then using my oscillating tool on the ends where the circ saw doesn't reach saves a lot of time. Great video, very well explained 👍
@SARDOG3 жыл бұрын
That is exactly how I am doing this... oscillating tool ftw
@erichsh583 жыл бұрын
I have a Dremel circular saw with a three inch flush-cut blade and it works very well.
@christen10753 жыл бұрын
Boy this was worth the price of admission. Saved me from making a lot or rookie mistakes. And I'm 71. Agree with the comments. Show the good with the bad. Had no idea they made plastic T-molding channels. Now I know.
@jasond87344 жыл бұрын
Every single time I get stuck, Jeff saves the day with a video that answers all my questions AND answers the questions I didn't even know I had. Merry Christmas Jeff! *returns to installing flooring on Christmas eve*
@originallilmama4 жыл бұрын
Thank you for also showing how to fix the mistakes you may run into. This was a very helpful video.
@sparklander4 жыл бұрын
When I transitioned from tile in the entryway (installed when the home was built) to tile in the laundry room (that had linoleum) I used a nice metal transition strip. It worked out great. Thank you for your educational videos. I appreciate your positive demeanor.
@MStar104 жыл бұрын
I have the same thing but the heights are different - I assume your heights matched up so the metal strip worked well. But I'm not sure what to use
@ashleytakesaction25373 жыл бұрын
this is the most helpful video I have found for laminate to laminate transition on a concrete slab! I have waited to do transitions for about a year, longer on some parts! LOL Thank you for this video!
@stevehale18453 жыл бұрын
I love this guy. You are so down to earth and transparent. Thanks for helping us DIY'ers.
@billballaro60393 жыл бұрын
I also agree with Peter H. You leave in bumps in the road and show us how to fix unforeseen issues. Thanks again.
@hrrh5 жыл бұрын
Thanks for all your work that has made my handyman life so much better!!!! After 50...100+ hours of watching your very efficient ideas and processes I was finally surprised wo think of a tip for you? Trimming that luxury vinyl plank or laminate at the improperly installed door threshold area you might want to drop the recip saw and use your grinder ... "cuts" your time from 30 min and using a few expensive blade to 2 min.... with a 50 cent steel or masonry disc on the grinder... super easy (especially without the safety shield)!!!! You are blessing... well if there's a God and if there is not then you are at least extremely helpful!!!!! cheers, brian
@hannaredo75385 жыл бұрын
I am so glad you did this video with concrete rather than wood! Thank you!
@mamat39003 жыл бұрын
My issue too for transition from tile to laminate. And the tile guy did exactly what you said, they finished off the tile too soon (who knew??). My daughter and I installed a floating laminate floor and the tile is higher and I can’t do just the T transition. More like the concrete to laminate only in reverse heights. Using the 4 in 1 transition set from Pergo. Had to special order, but worth it for the color match and options at hand for all the door ways. The nice part is they gave us an extra rubber piece to make it all match for the extra height for the underpayment. Sweet! One door is tIle to laminate and the other door is laminate to carpet. I love your videos. You should see this floor. Looks great and I am proud to say that I am a weekend warrior!
@dwaynecales62824 жыл бұрын
Thank you so very much! I am doing my very first laminate floor installation in a small bathroom. I have the water proof flooring and all my supplies. I did however forget the transition strip. I will be ordering it from my "Big Box" supplier. I will be laying about 28 sq. feet on flooring. Along with this renovation I am having a new shower pan & surround installed. I am installing a new pedestal sink, glass panel entry door, and new baseboards & mouldings around the window and door. I am excited about this project and I will return to these videos for help and guidance along my way in this adventure!
@tomacquilano13044 жыл бұрын
EXACTLY what I was looking for! We just completed about 500 sf of vinyl flooring in a basement and have two doorways entering into unfinished areas. The reducer from the flooring to the concert floor is what we are looking for right now. BTW, your videos are excellent! Seems every time I encounter something i'm not sure of, there you are showing me how to do it! Keep up the good work!
@polluxtroy695 жыл бұрын
That transition part of the video is exactly what I've been looking to find out what I need to do. Thank you.
@jaredj6314 жыл бұрын
Totally all the other videos I found about it is a guy talking for 10 minutes and leaving out the vital information
@randycny5 жыл бұрын
Wow, that blade has seen better days. I've done that exact thing to fix transitions from a wood floor to a laminate. Decent blade went through the whole thing in about 5 minutes. :)
@HomeRenoVisionDIY5 жыл бұрын
time to sharpen them again for sure.Cheers!
@litoloco4fish4 жыл бұрын
Thank you for being so meticulous about the rules!!! It really helped..most just show you 1st, 2nd, 3rd..your done..yah if you've done it for 20 years...first timers need rules to make it look professional as possible..👍🏼
@als10234 жыл бұрын
A carbide scoring tool goes along way to eliminate the number of blades and getting a straight line in cutting off the the flooring. Use a straight edge to run the knife along, to cut through the tough top layer of the flooring then cut with the oscillating tool. The tool is normally used for cutting laminate, and in this case will eliminate the chatter from trying to cut through laminate with a very high quality finish, by scoring a line through the clear finish and top layer. Great video !!
@bryanbest93024 жыл бұрын
You're a life saver dude! I'm trying to get a job installing floors. I have a little over a year experience installing laminate and vinyl plank, but I'm a little rusty because I haven't done it In months and your videos are the perfect refresher. I've even picked up a few tips that I've never seen before. When my boss installed transitions he would throw the track away and glue the transition in with liquid nails😂
@maryeannkovatch62334 жыл бұрын
By the way, your explanations and instructions are phenomenal! Thank you!
@mickh1663 жыл бұрын
I know this video was done a while ago but we are only now considering attempting the job ourselves.You have given me the confidence to attempt it because of the way you explained everything in a way that a first timer can understand. Excellent and honest presentation, thank you.
@AthenaAthena5 жыл бұрын
Jeff guess what, I watched your videos and I demoed my entire guest bathroom by myself. I'm gonna have someone install my tub for me though because I don't know jack about plumbing. Just wanna say thanks for all videos, they helped alot.
@HomeRenoVisionDIY5 жыл бұрын
right on!
@stevenzawalick493 жыл бұрын
I'd take a can of spray varnish and seal the bottom of the molding every time. Never leave MDF unprotected. Water will find it.
@daniel923e5 жыл бұрын
Thank you Jeff, every time I learn something new.
@HomeRenoVisionDIY5 жыл бұрын
My pleasure Danny, glad to help! Cheers!
@lightwavz5 жыл бұрын
We have all of the above! The second this came out, I sent it to my husband, and, accordingly, he watched it right away! You seriously walked us through our entire renovation project! Additionally, I have been dropping your channel info in the paint waiting lines as well! Another great video. Thank you!
@wandahunt99904 жыл бұрын
Hey this home Reno is great hes the only video I watched That told me what side was male and white side was female with the vinyl planks not one other video showed me what side should be towards me he was very thorough and great keep up the good work
@onelikeus8834 жыл бұрын
I'm currently in the middle of a transition like this with my bathroom. I like the look of the T molding there instead of trying to get the planks all oriented the same direction throughout the whole installation making it flush. Much easier and looks good. Thanks!
@Missypeachy4 жыл бұрын
Amazing video.. so informative! I love the parts where you show what “do-it-yourselfers” do and how to fix it. I wish I would have seen this before I did my living room floor 😞..
@real_Mike_Green4 жыл бұрын
Lots of good info. It helped me when I installed the transitions in my rental trailer. Thank you for the help. Also it was good to know where to stop on door jam.
@moneymakingmikeg.95555 жыл бұрын
Jeff, absolutely fantastic video bud!!! I just learned more in the past 16 mins. then I have in 20 years of watching (DIY TV)… They actually do not teach you anything, and ppl. actually think they can accomplish complete room makeovers in a WEEKEND!!! You break it down step by step, and instruct ppl. on the realities they will face!!! Until the next one, God bless and Dirty Jersey out!!!!Oh, P.S., can't wait to see the Greek Revival trim videos coming up... Ha ha ha just joking bud, anxiously awaiting all or any trim videos!!!!
@HomeRenoVisionDIY5 жыл бұрын
Cheers to Jersey. we appreciate that !
@CUclimber5 жыл бұрын
Thanks for this. It is really helpful to have videos that show common mistakes and how to fix them.
@HomeRenoVisionDIY5 жыл бұрын
Just keeping it real. Cheers!
@grandtrunk493 жыл бұрын
Used your method on the floating engineered hardwood and it work perfectly. The only issue was the wood tongue that fits into the metal groove was too wide and had to be trimmed to fit. After that, perfect fit and impressive look. Excellent video.
@lordterrabyte14175 жыл бұрын
plates for the transitions (we just call them trims in AU) should always be fitted WITHOUT the underlay under them to prevent rocking and in the case of the cheap and crappy plastic tracks cracking over time (get alumnium tracks when you have the option, they're out there).
@MegaMetinMetin5 жыл бұрын
THIS IS THE PLACE TO BE TO GET THE PRO JOB FOR THE DIYERS!!! BEST HELP
@HomeRenoVisionDIY5 жыл бұрын
I couldn't agree more! Cheers!
@Stoneham645 жыл бұрын
Jeff, great information as always! Best DIY channel out there. Only suggestion is to WEAR EAR PROTECTION when using that Fein Tool! My ears are ringing just watching. I'm not one of those over the top safety Commies but that tool is so loud and high pitched that I always slap on hearing protection when using.
@terryq99665 жыл бұрын
Going to be needing this help in the future, thanks! I think a lot of weekend warriors also might like help with other types of transitions...tile/vinyl/carpet/laminate/3/4 oak or any combinations of the above. I think there's a sizable population that maybe can't do multiple rooms at one time due to time or money constraints. Cheers.
@HomeRenoVisionDIY5 жыл бұрын
we will be doing a video on all transitions. Cheers!
@kennztube4 жыл бұрын
I know you mean well but calling those not in your trade ‘weekend warriors’ is a little harsh. Many people will be able to do this without major issues and do lots of jobs about their home. Main reason I’d say is some trades people charge too much and some don’t do even an adequate job.
@billballaro60393 жыл бұрын
Thanks Jeff, you saved my butt once again with your to the point and easy to follow instructions
@jessekolar3224 жыл бұрын
Love that you didn't fill the gap with adhesive/caulk. I replaced a door that was done like that and the door looks like a mess and nobody would want it anymore. The concrete was lumpy and took an hour of scraping and working with an oscillating tool to clean up. I WISH they'd followed your video.
@raghnallmacaodh32203 жыл бұрын
transitions, love or hate them... they made my life much easier doing one room at a time over the last 6 months....
@ThePhilandPam5 жыл бұрын
I much prefer to use natural wood on floors but for our rentals we always use laminate flooring and those transitions give a perfect finish between rooms, excellent advice 👍
@HomeRenoVisionDIY5 жыл бұрын
Cheers!
@geladio5 жыл бұрын
I learned to never use laminates in my rentals. I have been using vinyl plants for over 12 years now.
@matchbox3eb5 жыл бұрын
Great video as always. Just finished my daughters room yesterday and we love the floor. Watching your videos on installation and transitions helped me avoid some obstacles for sure.
@HomeRenoVisionDIY5 жыл бұрын
Congratulations, well done my man. now Dad is a hero! Cheers!
@pmartialartsx3 жыл бұрын
Fuckin psychic man, I had this playing on my phone on the table. I was literally heading to shed to grab my liquid nails when I heard him say that some people try to do that and it’s futile! 🙄 Like at the exact moment 🤦♂️
@jtaratuta96234 жыл бұрын
Great video, great advice. Slipped those safety glasses on and off so fast for drilling the holes I didn't even see them . . .
@richardlug61394 жыл бұрын
Safety glasses for drilling holes? Funny!
@09VMM5 жыл бұрын
Thanks for doing this one. I started my first room before I watched this. And sure enough, I took my flooring all the way to the middle of the door stop. So it looks like I added on some extra work for myself tomorrow.
@HomeRenoVisionDIY5 жыл бұрын
This is the most common DIY mistake when it comes to flooring. I hope this helped. Cheers!
@gmrrnracr5 жыл бұрын
Thank you for demonstrating this! I needed this instruction years ago when I installed my laminate flooring transitions! YES, I am one of the many diy guys who messed this up! Thanks again
@HomeRenoVisionDIY5 жыл бұрын
this is the most common DIY mistake. Cheers!
@jessi3305 жыл бұрын
This is good to show the problems because often when you diy it does NOT come out as planned, or as perfect as some videos make it. We need to know what to do in those "oh crap" times.
@billmccluskey62943 жыл бұрын
Just did my bathroom floor with vinyl planks. Learned a ton watching your videos. Plan to do more of the basement after I get the floor level. Your videos are awesome. Having someone else level the floor cause the wife wants it done yesterday lol
@TP-fs3uz5 жыл бұрын
Sub'd about a month ago and I have to be honest... You've taught me more in a month than my old man did in 39 years! Keep up the great work!
@carlahammond83193 жыл бұрын
You always seem to have the perfect video for all of my DIY projects. Thanks!!!
@michaelcapobianco67835 жыл бұрын
I've had the opposite problem where I've had to raise the strip to make the transition peice fit so it grabs the strip, it's annoying but its holding up. Good info in your video, it helps.
@gp500fan4 жыл бұрын
I really needed this video to help out with my current vinyl floor installation that's taking place in my basement. Thank you very much for another helpful video!
@nelsonrachmaciej88964 жыл бұрын
Can you do a video on avoiding transition strips? I'm installing laminate in two rooms and would like to carry it all the way through
@politicalpartyagnostic2685 жыл бұрын
This is seriously good to watch!!!!
@HomeRenoVisionDIY5 жыл бұрын
Thanks, cheers!
@mnhoff4 жыл бұрын
Jeff, awesome video. I've watched dozens of videos to help with laying some vinyl flooring in my basement, this is the first time someone has clearly explained transitions. Wish I'd seen this BEFORE I laid my vinyl, as now I'll have to run the oscillating tool along the door since I came too close. But at least I know how to do it!
@kclefthanded4275 жыл бұрын
I could've used a brown marker to cover the gap but this is a better solution, thanks
@HomeRenoVisionDIY5 жыл бұрын
Professional results equal top dollar valuation for your home when you sell. |Cheers!
@joeo72573 жыл бұрын
I really like how you run into a challenge, and show us how to fix it, rather than edit it out.
@arlenemac164 жыл бұрын
I enjoyed your video, it showed me exactly what I was thinking that the installers did it wrong to begin with. We had laminate flooring put in our hallway and living room and the installers made a mess of the doorways as well as floor molding. I could have done all of this myself had I had time, but I had a feeling that they were suppose to not leave so much of it in the doorway rather they should have cut back in order to put the transitions and reducers in like your video shows. See, the hallway and Livingroom had to have plywood to meet with the kitchen flooring that was already down 4 years ago and our hallway and Livingroom had thick carpeting that made it blend in with the flooring but now that the Livingroom carpet and hall was removed we need plywood but our other 4 rooms have rugs but much thinner and we're keeping them and now we have an unsightly situation because these installers went ahead and put the transitions/reducers in that extended beyond the doorway and looks like crap and I have pictures of everything that was done wrong. My question is this, now that they cut back some of our carpeting in the 4 other rooms to fit the transitions and beyond the door ways that need to be cut back we'll have a space that will show missing carpeting when someone comes back to correct what was done wrong. How can this be done in order to finish off the doorways correctly and still cover the bare missing rug? Yes, we were told that when it's done the correct way we will have this unsightly mess to look at. I was thinking that these came in different sizes in width but was told no. How do you think this should be done in order to make this all work? Your reply to this matter would be greatly appreciated, we've been sitting on this for over a month waiting for the company to send someone out to fix what was done wrong to begin with. It's a game these contractors play, pay and wait and hope the consumer doesn't notice or care how it looks......
@ericmuller33394 жыл бұрын
@arlenemac16 Did you ever get it fixed? What did they do?
@RonConsumer5 жыл бұрын
Thanks, Jeff, I just learned a new way to use Kilz... great video... 👍👍👍👍👍
@HomeRenoVisionDIY5 жыл бұрын
Cheers Ron!
@jadesumsion3 жыл бұрын
Jeff you had a shop vac behind you. Too funny. Thanks for the video
@deborahdebolt74714 жыл бұрын
Jeff, your videos are awesome. Very informative and gave me the confidence to do both my bathrooms with a curved bathtub. Now I am doing my horse trailer LQ .
@lxiong10775 жыл бұрын
Nice tip(s) as usual for transitions. I made that exact mistake about 4wks ago.
@HomeRenoVisionDIY5 жыл бұрын
That always hurts. But for every problem there is a solution. Cheers!
@irecruitfish74104 жыл бұрын
7;25 some golden advice about how the t moulding might be a different color and you'll need to special order it. Also the humming was awesome haha.
@megan64393 жыл бұрын
Thank you, Jeff! This information is just what we needed for our next project.
@fhpd3504 жыл бұрын
I just had 1100 and some odd sq ft of 'luxury vinyl plank' and they used transitions going into each room, even if it was the same floor. I was told the T moulding had to be used for warranty purposes. I wasn't thrilled at first but I did just hear you say to use them everytime you're at a door.
@stevenbard4894 жыл бұрын
Jeff Thanks just what I needed for installing my transition, Perfect explanations and video.
@unrealantics4 жыл бұрын
Thank you sir! I'm one of those DIY'ers who should have watched this video first on my transitions. I have two of them to fix, thank goodness I didn't finish the whole project yet.
@edgomez79634 жыл бұрын
Looks like the second attempt went better after you used the right size drill bit so the plugs would seat properly.
@robertm49194 жыл бұрын
starting my floor tomorrow, my first ever. thank you for this video...transitions were my worry.
@yano18275 жыл бұрын
Thank You for your video! I have to remove the old T bar moulding as it was only glued by the contractor and it lifted the laminate floor and making it squeaking sounds... the solutions is the thing u screw and snapped it to the tbar! awesome! more subscriber to ur channel!
@ooluwadara5 жыл бұрын
This video was PERFECT timing for me. I made the mistake of not positioning the transition strip under the door and I was literally just asking friends if it looked weird. This definitely affirmed that it looks weird and I have to change it tomorrow. ughh but thank you!
@HomeRenoVisionDIY5 жыл бұрын
professional results are all in the details. Glad to help. Cheers!
@strikeanywhere29815 жыл бұрын
Another awesome video. Thank you Jeff. Your channel is the best.
@adamtafesse89715 жыл бұрын
I always enjoy watching your videos!
@HomeRenoVisionDIY5 жыл бұрын
Thanks Adam. Cheers!
@1193bobmcc4 жыл бұрын
Pure gold, Jeff!
@noquestions74433 жыл бұрын
Anyone looking to do laminated flooring there are lot more tricks you will need to know for door jam floorings which Mr.Jeff never shows in his video but many other video has it
@tomfields36823 жыл бұрын
Such as...?
@TheeBuddylee4 жыл бұрын
Thanks for showing the mistakes too very helpful
@alanjewell93305 жыл бұрын
Great tips on transitions. Even if you are installing wood or LVP this is helpful.
@jeremesmith33715 жыл бұрын
You can use wood screws in concrete by drilling a hole the same width as the screw then use copper wire as a anchor, copper wire may very but it works
@harrybobs40145 жыл бұрын
Great video, no shortcuts allowed on our flooring now! 👍🏼👍🏼
@HomeRenoVisionDIY5 жыл бұрын
Cheers ,Matt, glad to help!
@LarryBinFL3 жыл бұрын
Your comment about avoiding direct contact with concrete made me think: No kidding, why in the world would anybody be installing laminate instead of LVP nowadays? Yeah, it can be a *little* cheaper, but the LVP is such a superior product!!!!
@jimemerson88084 жыл бұрын
As always, so helpful & real.
@law19514 жыл бұрын
I'm doing a transition from laminate with thick underlay to carpet, which is much lower. Now I know that I need a 'reducer'. Thanks :-)
@quickstep2u5 жыл бұрын
I sure wish I was this handy around the house. I have trouble getting things lined up straight.
@HomeRenoVisionDIY5 жыл бұрын
practice , practice, and you guessed it!
@wheretonow31065 жыл бұрын
Home RenoVision DIY : Thank You.
@DeepWebDiary5 жыл бұрын
I wish someone would pick you up for those old Saturday DIY shows.
@HomeRenoVisionDIY5 жыл бұрын
no worries, we plan on doing these videos until 2030 at least!
@Yellowspider17764 жыл бұрын
Thanks for showing that it does not always work right the first time!
@A10TOES5 жыл бұрын
Thank You Jeff, this sure explains the transition process! Looks great!!
@HomeRenoVisionDIY5 жыл бұрын
Cheers , thanks for commenting.
@stanrobertson4 жыл бұрын
Jeff, how about using a circular saw to cut as much as possible in the doorway, then use the reciprocating tool to finish at the sides? This saves a lot of time and extra blades.
@13izeit3 жыл бұрын
Thank you for the excellent info. It's great to see what to do if one makes mistake. Please, if possible, let the cameraman know that when you do something with your hands the camera should follow. Sometimes the camera was in your face instead of your hands. Hopefully, we didn't miss any part of the process.
@joelransom65304 жыл бұрын
Jeff, I'm replacing carpet that transitions to hardwood under a doorway with laminate. Currently the hardwood comes all the way under the door to meet the carpet. To install the transition strip from new laminate to hardwood, Like the problem you faced in this video, I guess I will need to cut back the hardwood to accommodate the transition strip under the door? (Your videos have been a great help to me btw.)
@lucasbos34283 жыл бұрын
You could use a piece of solder and wood screws in drilled holes in the concrete
@lucas9116114 жыл бұрын
Excellent video.
@rlopez36154 жыл бұрын
This is so helpful! For the transition strip, what if your laminates are at a different height than your connecting flooring? Tile for example.
@wpsa1005 жыл бұрын
Like always good advice!!!! 👍👍👍
@HomeRenoVisionDIY5 жыл бұрын
Cheers mate, I appreciate that!
@blakepeterson19773 жыл бұрын
Thanks for covering how often to use a transition. I'm planning a multi-room install and that topic has been on my mind.
@scubacollie20833 жыл бұрын
You see that orange thing behind you at 13:56, it's called a hoover and it sucks up dust!!! 🤣 Great videos though mate I enjoy watching them and have picked up some great tips thank you 😊👍