How To Install A Drop Ceiling | DIY For Beginners

[@anniep6372]

My Dad installed a drop ceiling in our basement years ago when we were kids. When we became adults, he said they use to hide Christmas presents up there so we couldn't sneak a peek at the presents. - Loved this video!

[@HomeRenoVisionDIY]

great memory! Cheers!

[@teddywolf2006]

Wait,….. there’s no Santa!?!?

[@cybermad64]

What a great idea! :O

[@nathanstoughton5641]

Nowadays, that's where the kids hide their paraphernalia.

[@DanielSanchez-gy6ey]

@@HomeRenoVisionDIY0.04 seconds of the video. What is the 1x1 drop on the ceiling called. To the right of you.

[@leechburglights]

I did this in my kitchen back when the ceiling leaked and the plaster came down. I didn't have the skill or desire to do drywall on this old house, so I just up the drop ceiling. What an amazing help it was too. I was able to rewire the entire kitchen very easily! It's held up very well and still looks as good as the day I put it up. Fast forward 16 years and I'm buying a new home. The basement is not finished. What a great reminder that I can easily install this ceiling down there and hide all the plumbing and wiring without losing access to it.

[@taylorpolatty3024]

What do I do if my house has trim do I take it down before I do the ceiling or can I just leave it up there?

[@DavidCASBONNE]

Thanks a lot for all your videos ! This one helps me building confidence to install myself a drop ceiling. Last year you helped me with building a drywall ceiling soundproofed. And this summer it would be shed on a concrete pad ! Your explanation are easy to understand.

[@robertastrella8754]

I just put in a craft room in my cellar for my wife's art. I used all your videos to guide me through the whole process from putting in the studs to the finished result. It came out great. Couldn't have done it without you. 😄

[@curtwatters4395]

You sir are the best on U-Tube. We look at your videos before we start any new projects, thanks so much.

[@roqq5]

Thank you for posting this video. Perfect timing! I was just planning to tackle a similar project this weekend.

[@brentmwil]

I am currently framing an office in my basement. Just about done framing and I was really debating between drop ceiling or drywall. Great video and great timing, thank you

[@jasonswoger410]

I almost always go drop ceiling in a basement as long as height allows it. It's so much easier to replace a ceiling tile or 2 when you eventually have a leak also if you need to ever access what's up in the joists just pop a tile or 2 and move it out of the way and move it back when you finished

[@HomeRenoVisionDIY]

great option to manage sound proofing options as you move forward.

[@ptessier73]

@@HomeRenoVisionDIY On your previous video where you did soundproofing, you mentioned using SONOPAN with a suspended ceiling. Of course, by doing that, you lose access to whatever is in the ceiling but you don't have to worry about doing the mud. However I see one issue with doing that. Lets say you strap your ceiling with 1/3 every 16 inches to attach the SONOPAN boards, that means you get a gap of 1 3/8" between the SONOPAN and the joist trust and those pins used to fish the wires seem like 1 1/2"... What would you recommend in that case?.. Also.. How confident are you that a ceiling with INSULATION (R12) + SONOPAN + Suspended ceiling would provide good soundproofing, especially that you have to place those pins directly on the joist trust or the 1x3 woof straps which would transmit sound over.... Last but not least, I imagine a suspended ceiling is not a good choice for a bathroom with a shower in a basement right? Sorry, those are 3 questions there...

[@HomeRenoVisionDIY]

I always go 2 layers of r20.

[@jasonswoger410]

@@ptessier73 soundproofing is just a matter of terminating vibration. All the fibers in Insulation make it a great way to damper the vibration of sound moving through a wall. Think of it like a metal plenum disbursing heat so that something doesn't get hot enough to ignite. If you can temper the vibration you can temper the sound

[@taiiiiiiiiii]

You mentioned in the beginning of the video that you were going to go over a more advanced technique on how to install the drop ceiling with a 1-in clearance. Can you show me how to do that? I've also got HVAC with some ceiling vents in place, how would I connect that?

[@binderdundit228]

Great video. I am going to do my first ceiling tomorrow at a client's house. Never be nervous about doing something you have never done before. Just use your common sense and do the best you can. This video gave me a good base of knowledge to apply to my already existing skill.

[@bubbamoran2964]

I just purchased all needed items for my kitchen and dining room. I spent more than I wanted too but I know it will look fantastic when it's done. My drywall skills are so beginner staged with a sagging 1933 house. When I saw your video it made me decide to go with a drop ceiling. Thank you so much for your videos. Im almost ready to paint and getting excited to finish this project.

[@negocios0rsk]

THANK YOU! I just completed a suspended ceiling in my laundry room. Your videos were very instructive. Now I have a new skill… but, I’m all out of unfinished ceilings. Great work!

[@dhh488]

Stop by, I have some unfinished ceilings.

[@judahjade2046]

I am the person with the walls and floors done but held off on the ceiling because I hate mud and taping. Once I'm done wiring all my cables for my home network i'm definitely doing this. thanks for the video!

[@HomeRenoVisionDIY]

There is a solution to every problem. Cheers!

[@mromutt]

Ok, you sold me on drop ceilings lol and honestly kind of want them through the whole house now. Just imagining being able to change things anytime for any reason, running new ethernet, speakers and speaker wire, change lights on a whim! HDMI cables all the things is endless haha. also thinking how nice it would be to take them down any time you want to paint them or want a new look.

[@cybermad64]

House already had a drop ceiling when I bought the house. Sooooooo useful when doing network wiring or installing home theatre speakers!

[@j.morrison73]

Except for the very first three minutes of this tutorial, this is a great one. I even paused it a few times while being interrupted so I wouldn't miss any of your tips. Then I saved the whole thing for future use. You even convinced me to buy a laser leveler. Thanks.

[@billm.8220]

Going to have to redo a drop ceiling in the future. Will definitely be rewatching this video a few times. Appreciate you mentioning the code requirements. Love all your videos. Am currently repairing the drywall on the walls. Thanks for the detailed instructions. Saving a ton of money not having to hire pros. to do the work.

[@larissaalcorn3406]

I have to say, you are a fantastic educator. I can't stop watching! 😀

[@HP-bi5py]

interesting math at 14:39. If you want the first recessed tile to sit and be aligned with the wall hanger's edge. you should cut 3/8 from the cross tee insert which is where the small hole is, giving the wall hanger is 7/8" in wide. Good thing you did not cut it short.

[@chrisscharff6518]

Great video! In lieu of the traditional wires, I used the QUICKHANG Grid Hook Kit, 6 in. by Armstrong. Easy to install, quite secure, and easy to adjust for fine-tuning..

[@crimsyhs]

Thank you for sharing!

[@jay600r]

I'm good with my tools but hadn't done this yet. This video is perfect. Bought my house with the basement finished but the basement bathroom ceiling needed to be finished. I'm a pro now. Kind of upset it went so fast! Thanks for your time! Great video.

[@edmondmartin9004]

Excellent video with clear instructions, the step-by-step direction along with a very good visual of the process. Congrats! & Thanks

[@HomeRenoVisionDIY]

Thank you very much! Glad it was helpful. Cheers Edmond!

[@silverthunderbird]

Great video! The outside corner piece advice was worth the price of admission.

[@petera.watters4459]

ONE OF THE BEST DiY CHANNELS ANYWHERE!!!

[@HomeRenoVisionDIY]

Cheers Peter!

[@dessaulnier]

Hey Jeff; Love the videos, but I have watched 14:15 to 15:14 about 20 times and I still don't understand why you are cutting 3/4 plus 3/8 within the 3" of the end of the Main runner track. If my Tile is 23.75" X 23.75", woudl I not have to cut that main runner at the 3" or behind that at 5deg angle so that it sits on the wall angle to fit my 23.75 x 23.75 tile?

[@leviathan1728]

As a commercial installer, it's interesting seeing residential methods. Beautiful finished product 😎

[@jeffthewhiff]

Jeff, I really enjoyed watching this video on how to install a suspended ceiling! I have worked with suspended ceilings before, but have most of my experience with just cutting and installing the ceiling panels. The project I will be working on is in a bathroom as the ceiling is in bad shape and my customer would like me to install a suspened ceiling. The room is only 6' x 6', so it is very small, but there is also a light fixture in the center of the ceiling that my customer would like me to replace as well.

[@allen_ehlert_mortgage_agent]

Learned so much from this video! This is why I am a member... I just learn and learn and learn!

[@HomeRenoVisionDIY]

Cheers Allan. New live shows coming soon. and thanks for supporting us!

[@alycynde5237]

Fabulous video. In my basement reno I'll be doing the drop ceiling. This made it look a lot less daunting.

[@graig654]

I’m almost to this step in my basement! Finishing up some wall finishing then this step. Cheers!

[@HomeRenoVisionDIY]

Cheers Greg!

[@brucemaguire2757]

I’ve been following your videos covering so many different trades and fields. Learned do much and continue to learn. Great videos

[@michaelobrien6107]

Just saw KZbin's ad in the Toronto Star starring Jeff. Congratulations!

[@youtukang]

😊👍

[@HomeRenoVisionDIY]

Cheers Michael. I didn't know that was happening.

[@carverdahlin2728]

I really appreciate showing people how to properly cut a reveal along the wall on drop tile!

[@Smart-Skippy]

G'Day from Western Australia. Thank you for a fantastic video. Your confidence is both inspiring and contagious!

[@ondrejkovac2157]

I just start to do my basement development. Every your video is awesome. Thanks for do that.

[@jaykrusac2981]

You are awesome, I like learning from you. You explain things in such an easy to understand way.

[@AnakinVeyder]

Fantastic video sir ! Motivated more than ever to finish my basement now ! Thanks for sharing this wonderful video !?

[@HomeRenoVisionDIY]

You can do this. Cheers!

[@nonobrochacho240]

There is a lot of info in here you clearly learned from experience. Thanks for sharing, a lot of it I would never have thought about until it was too late.

[@annehause7118]

Love your videos I've watched so far. I have a question about tightening up the wires. Could you show an up close of how you bring the tail of the wire around and make your little loop to tighten it??

[@CeltsonToote]

yay! So excited about this video! Very well explained as usual :)! Was leaning towards drop ceiling in my basement and now this confirms it.

[@mayeri3083]

00

[@jerrymay3806]

I watched yr pot light videos and greatly benefited frojnyr advice. Thank you, you make a great teacher!!

[@CarlosRamirez-kv7sl]

I would like a video how to frame the boxes to cover the air conditioner pipes. How to to do 45 degree something. Thanks to share with us.

[@CheriFleming-m5h]

Thanks for the great video! Where did you find the finished rounded outside corner pieces? Are they plastic or metal?

[@MrAbouAbed]

Thank you for the awesome video. I'm planning for a drop ceiling, but I have ductwork so I'll have to do a soffit (bulkhead), how can I do a drop ceiling in this case?

[@user-kx1lz8xz1m]

When do you show how to do the 1 or 2 inch spacing method? I have 8 foot ceilings, so I don't want to go all way down 4 inches. And I do want to hopefully use sonopan only. Would you recommend this? I own my condo, so I could also remove the drywall, but like you said, that's a bigger undertaking.

[@brookebicksler3014]

Great video Jeff! What if the ceilings are already low and you want to try the option of installing as you go to have the least amount of drop (you mentioned 1" in the beginning, but I didn't hear more about that towards the end). Thanks!

[@HomeRenoVisionDIY]

simply go 1 row at a time flush to the ceiling. when you get to the other side install the L bracket last. the long T is taller than the rest of the grid so you have room to wiggle.

[@huejanus5505]

@@HomeRenoVisionDIY If you drop the ceiling only 1”, can you get the tiles back out for access?

[@MS-ng5ll]

Could you explain that answer again don’t understand

[@kcnot9837]

This vedio is SUPER Helpful. Thank you so much.

[@petenelson8136]

Never installed a drop ceiling, thanks for the demo. Now if I ever want to I know how.

[@HomeRenoVisionDIY]

Cheers. always good to have options!

[@dizastro5437]

Pretty easy job. My first try came out perfect. A cheap laser is your best friend.

[@dizastro5437]

Measure 1st, and try to center the field. You dont want one edge to be a tiny, narrow cut. Better to center up and have some tile to work with around the perimeter..

[@dizastro5437]

I did a little different. Dropped my wires, then dropped the laser, then a 3" tape (measure) to hang the Ts on a perfect level plane

[@chrisshingler9258]

Great videos! Great info! I can do drywall!!!! Thank you and youtube. Where would I be without people like you willing to teach and share

[@sparkwebdesign]

Hey Jeff. Dont know if you have this video planned yet, but how about a spring checkup / maintenance guide for us Canadians? A lot of home owners are not sure what to look for in the spring after a thaw, and just general maintenance of the house. Would love to hear your thoughts or suggestions. Thanks,.

[@HomeRenoVisionDIY]

great idea!

[@renatoeslava4866]

Excellent DIY job again man I've been watching your blog videos and I've found out very helpful and I've doned a DIY jobs from basement bathroom and basement vinyl flooring job its help me alot and I save a money thank you man for your great idea and helping people like me God bless.

[@thudang3039]

Still my fav DIY channel! =) Thanks for the great content!

[@frankwatsoniv9205]

Thanks for the video. Two questions. How much does the materials cost and which laser level did you use?

[@lynryan3636]

Always trust your videos and knowledge- just doing a couple replacement today but a few tips are super helpful- Thank you!!!!

[@MrWilkat1]

Well done. I saw that they now sell special clips that you can attach above the celiling that you simply insert the hang wire through and you can use them to level the T system by pinching the clips that act like a spring to hold the wire. Any idea how costly they are? Your method avoids those and is (I believe) more cost efficient. However the clips might prove handy for some.

[@kevinr3263]

I like that trim piece for the outside corners, never seen that before

[@HomeRenoVisionDIY]

Cheers! makes every diyer look like a pro!

[@mattdevries8434]

​@@HomeRenoVisionDIY Do you have a link for these pieces? I am having a hard time finding them.

[@tjohns42]

Your videos are always great! I think the only thing missing here is how to join the main rails together.

[@richardp3890]

I did’nt find the advanced technics you spoke about (3:40) for very minimal spacing. I have a window in my basement that leave me with less than one inch between the tracks and the beams. It’s a nightmare when I need to move the panels.

[@taomoonsworkshop9113]

This is the exact video I needed to see to redo the previous owner's drop ceiling in my house.

[@UToobSteak]

I've always hated the look of drop ceilings, but those tiles look better than most, and I can see the benefit in the basement for sure. Easy access if you need to repair something without cutting drywall. Nice job.

[@HomeRenoVisionDIY]

great place to hide Christmas presents as well. Cheers!

[@billb.4901]

Great video. I just have to say that if I had your videos in the 80s, building my house would have been a much easier process.

[@mohamedabuabed5717]

Thank you for sharing DIY videos. I have some ductwork in my basement, how to install a drop ceiling under ductwork?

[@117moose]

When I did mine I took the end covers and cut them and half and used it for the ends on the wall, made it look clean

[@garthmiddlestead1167]

Do you have any tips for an area where your drop ceiling will be coming up to the opening for a stairwell? My stairs to the basement is mostly open to the one side so dropping the ceiling would be visible from the side as you come down. Thanks.

[@georgeelliott3782]

Always love your videos. What part of Florida are you in? Would love to have you come out and advise me on my 3 year home renovation I'm doing. Would house you and the misses, feed ya and ensure your glass stays full of the drink of your choice.

[@jacobh5150]

We received a quote to get a drop ceiling installed in the basement, but now i'm more confident that I can do this ourselves. Thank you for this amazing breakdown. One question though. I cannot find any information about securing the outside perimeter to ductwork. Our basement has ductwork below the floor joists. Can you secure the rails to metal duct work?

[@fbiagent4hire]

frame it out with steel stud and drywall and tape. Not ideal to install to ductwork

[@thehumantoeRD]

Our basement is one of the future projects on the list. It used to have the drop ceiling. I was contemplating whether to do that or a painted shiplap using brad nails. That way it wouldnt be too hard to pop off if I needed access in the future...

[@johanesteban5343]

Great video. I would like to know how to soundproof this kind of ceiling.

[@davewinters174]

I will be doing this this weekend, i always look to you for my projects!!!! Thank you!!!

[@instanoodles]

Beautiful, thanks!! I was just getting to this point in my basement reno and I hate the idea of covering up all the electrical and plumbing with a drywall ceiling.

[@HomeRenoVisionDIY]

This makes DIY electrical very easy. add as many boxes as needed. Cheers Alex!

[@CT_Taylor]

Ive been doing a lot of fixing on my house after disrepair/not done correctly by my gpa back in the 80s, and the fact the ceiling is drop and he wired in outlets to plug in fluorescent lamps with a clear sheet to let light through has allowed an outlet to always be near and then converting them to LED made the lighting goood and then having access to the plumbing and electrical is nice and running things like ethernet has beeen easy etc

[@x1984x]

One of the very unexpected benefits of strapping in my 1945 house was it let me level off the ceiling. Since the joists were bowed every which way and it was wavier than the ocean!

[@HomeRenoVisionDIY]

Noice!

[@MDAndrewM]

Hey Jeff, I've been using your videos a lot to help me with finishing my basement and I'm finally almost done (working on the ceiling, of course). I wanted to know if you knew of a good US supplier for the Wall Angle Cover Caps you are using at the 9:00 mark. I only need 3 for my basement, but I can only find packages of 50 on amazon. Canadian Home Depot has packs of 2 listed on their site, but US Home depot does not have any at all. Every hardware store I've gone to does not have them and I'm flabbergasted because they seem so useful.

[@HomeRenoVisionDIY]

try looking for a drywall supplier in a commercial location. they have showrooms with tools and materials for drop ceilings as well. Cheers!

[@MDAndrewM]

@@HomeRenoVisionDIY Thanks for the suggestion and again for all the amazingly helpful videos!

[@LuisRodriguez-wo6nl]

Oh man !!! I've seen many videos on different guys and tradesmen doing house renovations, In my humble opinion you have to be right at the top of the list, After watching just under 5 minutes I kinda knew you are real deal !!! I live in PA and gotta tell you I'm learning so much from your videos it's nuts .. I've always thought this stuff was very difficult but it's not if you got the Right tools and follow a nice approach. To it.. Congratulations 👏 I assume you have your own company at this point do you have name and phone number for your services??? Thanks 👍👍

[@gilly0264]

Thx Jeff interesting to watch how it’s done you always make it look so easy 👏👏

[@HomeRenoVisionDIY]

Glad you enjoyed it Gilly! Cheers!

[@AdamvsMaximvs]

I'm finishing my basement in Edmonton, and I'm really debating drop vs drywall. I've fortunately got a Panel-lift so drywalling isn't too backbreaking. I like the minimum amount of height loss and appearance of drywall, but damn ceiling tile is so much easier to put together.

[@Brian-gx7yx]

You need access to junction boxes in the basement. Drop ceiling gives you access. I’m in Edmonton too. I install grid professionally based on the price of materials equals price to install

[@AdamvsMaximvs]

@@Brian-gx7yx well I'd still have access with drywall. Run wiring after Strapping, but before drywalling. Obviously I'd cut out the jbs before finishing. There's cons if you need to change something down the road or if there's leaks of course.

[@saint1086]

Good job. I learned a lot from this demonstration. Thank you for making this video.

[@detenator890]

Hello and thank you for making this helpful video. I just have one question. In my basement, all the walls are cinder block. How do I get the perimeter track attached to cinder block?

[@christineobrien7445]

Great video! Was wondering if you had advice for concrete walls?

[@shahafshaked7148]

Thanks for the tutorial! great work! I want to install a drop ceiling in my living room to absorb the noises coming from the 2nd floor. The entire room is concrete, though, poured all at once. Do you think the drop ceiling by itself would be enough to absorb the noises? Because I fear some of the noise would travel through the walls

[@cherylgordon1381]

I enjoy your videos on how to complete different Reno task. I am interested in learning more by hands on experience. Could you direct me in how to do this so I become better at my Reno craft. Thank you for your time in advance.

[@KRWalker22]

Great video Jeff, but I followed the instructions for cutting the track ends to align with a 24 inch tile, and I ended up with too much on that end. The first 3/8 inch after the slot is all you should do. I had to redo the cut and that made my complete length too short it is now barely hanging on to the frame. You might want to clarify that in your video if you can. Otehr than that great tips and tricks, you are really good at these instructional type videos! Thanks

[@Etilas]

Im about to do my ceilling and i was not understanding that point too because i think the 3/8 and actually the 3/4 depending of the length of the edge of the track, should be the length you keep at the 3inchs section of the main track. I was thinking the same thing why he add 3/8 to 3/4 at the 3 inches section for the main track. Would be nice to clarify that :)

[@garrett0024]

Can you clarify where to cut? 3/8 inch from the first t bar slot?

[@josephkelly3184]

Yeah I could see this way for home owners , good video . It’s a lot easier if you can get it laid out and install all the wires after the angle is up and set up jet lines for your first main and tee line and use the laser to level it and just tie it the laser line for level .

[@timk9289]

I am thinking about installing a drop ceiling in my basement. Do you have any tips for working around around basement windows? That is a good idea to start from the middle and work to the perimeter to stabilize the grid :)

[@Arphaxod]

Big fan of your videos, Jeff. Any leads on where to get outside corner finishing strips? I can't find anything even remotely close to these.

[@davidtompkins5000]

same! link anyone?

[@RyanThomas-hl3dl]

Only place I found was home depot, but kinda pricy... still looking.

[@rodrigovonschula4176]

Hi, thank you for all your lessons. Just want to say, Hopefully Home depto in Canada could offer all the items you works with...Thats probably USA is USA...

[@johnfithian-franks8276]

Hi Jeff, my cousin used to put those ceilings in and one day when I was on holiday, I went with him to install a ceiling. I found it extremely easy and we installed this ceiling in about three hours, I was horrified when he dropped of my half of the install over six hundred pounds, so he was charging double that and he told me that if he asked less he would not get the job because people would think he was not doing a good job. I put a dropped ceiling in my house and as you have shown it is one of the easiest jobs around and I would not feel comfortable charging the prices he did as a result I have only installed two dropped ceilings in my lifetime.

[@HomeRenoVisionDIY]

back in the day a laser level was very rare and expensive. now it is very affordable but folks don't know the option.....until now! Cheers!

[@noelrodrigue5542]

@@HomeRenoVisionDIY Right, let's say you (somehow) don't have a laser level, do you then measure from the floor or from the bottom of the joists to draw your line? Would you then use a level to draw the line itself between measured points?

[@jasongarrett7633]

@@noelrodrigue5542 Depends on how big the room is. You can measure down off the joist in the corners if it’s a square room. You can mark your height for the top of the mold and level with a level and then chalk the wall to the corner mark with level on the next wall and then chalk that wall. Go all the way around the room this way. Pull some strings across and level ceiling to the strings.

[@noelrodrigue5542]

Thanks for this!

[@michaelball4720]

Hey Jeff. Great video. What is the make and model number of the stud finder you use.

[@TheIronman1120]

Thanks! Debating drywall or drop ceiling in finished basement. Contractor gave me sticker shock for hanging drywall. I'll do the drop myself and save the money.

[@TurboLingaLanguages]

Outstanding video. Useful but also enjoyable to watch!

[@Jimmy_Cavallo]

💥 14:31 Why was it 3/8 plus 3/4 here? It’s the most important part and I want to get that right. Thank you otherwise for this great info

[@connerblah]

I think this is wrong. You can see in the finished product that he's actually using cut panels on the edges, not full sized ones, so he doesn't actually put this into practice. I think in theory, the measurement should actually try to put the slot inside the rail by the amount of overlap the tile has. So 3/8 in this case. That makes the measurement from the slot (width of edge rail) - (tile overlap), or 3/4 MINUS 3/8 in this case. This obviously only applies if you're putting full size tiles around the edge.

[@JoshuaStreet]

For low ceiling heights, check out the CeilingMAX system. I’ve been switching over my crummy old metal system that the prior owner installed decades ago in many areas with 0-1” of clearance above the tiles, and it’s basically impossible to remove and put back together without completely destroying the tiles, metal frame, or both. If you destroy the tiles & frame when taking them down to access plumbing/electric/etc, seems like there’s no real benefit to having a traditional drop ceiling in these situations. As a functional alternative for low clearance situations, definitely check out the CeilingMAX. Added benefit is that it’s 100% plastic and won’t rust if ever exposed to moisture. I bought mine in a kit from Home Depot, but I think they can be ordered from a bunch of places online.

[@BrunoSilvaAlleycat]

Is there a video specifically about strapping the ceiling joists? It looks like I might have to do that before even considering the drop ceiling

[@MikeLaforest]

Hey Jeff, do you have a video for creating a drop ceiling window well/slope? What's your solution?

[@peteroxley4973]

At 14:39 in the video, you cut the main tee 1 1/4" past the slot for the cross channel. Why? Should not the first cross tee want to be 24" , not 25 1/4" from the wall? The overall width of a tile is 23 3/4". I check your videos before I start any home reno project.

[@Raysthebars]

This guy is sincere wnd the best and thorough

[@HomeRenoVisionDIY]

Cheers Ray!

[@randolfa1a790]

Best video I have yet to see on drop ceilings. However, I am not able to locate the finished corner product you showed here in the states. Appreciate if you could give the product name and an idea where to pick them up.

[@babyelephant3077]

I may or may not have started a business following this man’s advice 😅

[@nemoija7166]

Question: Can we do double tile with acustic green glue in between to add to the sound proof? Please answer 🙏

[@jkarica3319]

Better yet, use insulation.

[@CarlosJuan2012]

What is the slimmest you recommend we cut the act at the edges? (Ref min 16:30). Thank you!

[@normandfontaine5508]

Great video ! I will move my drop ceiling from one room to an other room (and save money) but I want to refresh tiles by painting them, what type of paint do you sugest to use? Tank’s

[@96jazmon]

Do you have a video taking down a drop ceiling and changing to Normal ceiling renovation project?