Homfa 13gal trash can soft close canister malfunction.

  Рет қаралды 15,487

Michael Taylor II

Michael Taylor II

Күн бұрын

The canister part number is XHJ10-Y1-61-90-60N

Пікірлер: 21
@khushi274
@khushi274 13 күн бұрын
Thank you for the video and all those who provided ideas and solutions!
@MitchellEllen
@MitchellEllen Жыл бұрын
I forced in a small piece of rubber in, exactly the same size as the opening, then put tape underneath to hold it in place, it now works
@HumDingaDoozy
@HumDingaDoozy Жыл бұрын
Hi mine is the opposite - the valve is quite slippery and closes too easy ... do you know what I could do for this?
@chrislandry6573
@chrislandry6573 2 ай бұрын
I’m experiencing the opposite of this issue. Seems that the damper on mine sits too high in the socket and will not allow the cam/rod-strut on the bottom of the lid to land on top of the white cap on the plunger located on the top of the damper. I’ve tried like hell to press it down further without damaging the hydraulic seal in the body of the damper but so far, no luck…
@raythagawd2701
@raythagawd2701 5 ай бұрын
Question so how would you fix that other metal piece that’s going through the hole? It’s out of mines
@nataliebriceno9295
@nataliebriceno9295 2 ай бұрын
Thanks mate u saved me i didnt know where that bar went into 😢😢 i was spiraling
@stevenfaulkenberry5156
@stevenfaulkenberry5156 Жыл бұрын
Thanks for the quick concise video. Solved my problem.
@vicpetriella4594
@vicpetriella4594 10 ай бұрын
I just placed a piece of duct tape over the opening, works great.
@ABHINAVKUMAR-vh3ln
@ABHINAVKUMAR-vh3ln Жыл бұрын
Me facing the same issue now 😀😀. I will update if I get something.
@rayleneames1998
@rayleneames1998 Жыл бұрын
Same issue, any idea where to find a cap that will fit on the end? We have two and the plastic end broke on one.
@masoomshah100
@masoomshah100 Жыл бұрын
Hi! - did you get any resolution to this? I am having similar issue with my trash can
@olliegirl7193
@olliegirl7193 11 ай бұрын
Just stuff it with paper so it can fall through
@Bitemesice08
@Bitemesice08 Жыл бұрын
Does anybody know what the metal piece is called? My piece must have gotten thrown away somehow.
@amin5
@amin5 9 ай бұрын
It's called a rubbish bin piston
@HienTran-mi3bz
@HienTran-mi3bz 5 ай бұрын
Thanks for the information.
@elainemann5990
@elainemann5990 7 ай бұрын
Hi where can i order the part?
@cynthiamiddleton9312
@cynthiamiddleton9312 Жыл бұрын
somehow, that little piece came out when I pulled the basket out to empty it - fortunately I was able to recognize from this video, where it belongs and was able to pop it back into place - thank you very much! 😀
@BoobyLongskin
@BoobyLongskin 28 күн бұрын
100% with you ...I was looking at that piece like where in the fuck does it go lol after throwing out trash lol
@Jade_902
@Jade_902 Жыл бұрын
It looks like you lost the little black rubber gasket
@MarcusConley-z6m
@MarcusConley-z6m Жыл бұрын
Did it come with a rubber gasket?
Fix itouchless trashcan lid?
2:34
Evan Farr
Рет қаралды 1,5 М.
How To Fix An Automatic Garbage Can
6:51
1st Choice Crafts
Рет қаралды 233 М.
Players vs Corner Flags 🤯
00:28
LE FOOT EN VIDÉO
Рет қаралды 76 МЛН
Officer Rabbit is so bad. He made Luffy deaf. #funny #supersiblings #comedy
00:18
Funny superhero siblings
Рет қаралды 13 МЛН
Simple Human trash can fix
5:46
QuickVid
Рет қаралды 30 М.
DIY Trash can repair...
7:48
JCANMotovlog
Рет қаралды 1,5 М.
How to fix a broken sensor bin
9:21
Rob The Frugalist
Рет қаралды 7 М.
How to fix a Step trash can
4:26
Cat Ortega
Рет қаралды 61 М.
Hydraulic Damper Application -- Rotary Damper For Trash Can
1:09
Peir International Limited
Рет қаралды 7 М.
Simplehuman Trash Can Slamming Lid Slam FIX & Repair! (CW1830)
3:34
David Waltermyer
Рет қаралды 89 М.
Step-Lid Trash Can Repair
7:50
Dustin Rogers
Рет қаралды 10 М.
How to fix your pedal trash can
1:31
joshua dickinson
Рет қаралды 82 М.
Fixing the kitchen trash can lid lifting mechanism
5:44
Bruce Chastain
Рет қаралды 69 М.
DIY Trash can opener / Ikea Hack
14:19
create
Рет қаралды 150 М.