Honda 300 54% Gear Reduction Install

[@4968Pete]

Finally, a video of someone installing a gear reduction and not just showing it work.

[@alissastill7086]

Thanks for the video. Had to replace the cover gasket on my 300 this was very helpful!

[@HHOGFISHCREW]

I have a case with the extra bolt up top, the threads on the clutch are right hand to make lose too

[@TheHondaOutlaw]

about time someone finally did one of these, i got 3 questions this week on how to do it lol

[@Solitude313]

Yea man, I hope I covered enough.. Refer to this video if you will or want to.

[@TheHondaOutlaw]

I already did once lol. Next time i take my clutch cover off im doing one too. It seems people can find me but they can find dons videos i hope they find yours too though lol. The only thing i saw that you didnt put in that i always put in is manual new clutches and mainly the springs. I found out the hard way it WILL slip without the springs.

[@Solitude313]

Yea, I really thought hard about doing the full thing and I usually do do the Clutch Kit and Clutches with it, but didnt feel the need with this one. Just a slow build, just 54% and Tires and Snorkel.. the 3 Honda 300 basics

[@TheHondaOutlaw]

yep plus you arent running huge tires just those 28 ol2s so maybe it wont be so bad but they do pull hard, time will tell.

[@Solitude313]

I cant wait to try them, I got that video uploading now

[@bunnyhall116]

What's the 54 percent reduction do...?

[@LifewithJames]

So does grounding the neutral wire make the neutral light stay on all the time? What’s the reasoning for doing that?

[@tylertodd6892]

The light does stay on all the time it allows you to start quad in any gear

[@juancarlosvelarderodriguez8500]

Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?

[@brannonjones982]

Say man I'm looking for a selectable front diff for a 2000 honda foreman 450S I'm n east Tx

[@codyswilley]

Did u ground the neutral switch plug to start it gear. If so I'd like to know more about it

[@Coonhunter08]

Where can I get that gear reduction for my 300

[@brycesanders7299]

where could i get a gear reduction for my big bear 350

[@johnharrell2240]

Im replacing my timing chain, and cant get the clutch to stay while i loosen it up. How did you get the clutch the not move while you loosened it up?

[@A_raww22]

For some reason this video won’t play for me??

[@probablyonahonda]

Same

[@A_raww22]

cottonwoodrebel try playing the vid online instead of the KZbin app that’s what I did and it worked for me.

[@probablyonahonda]

@@A_raww22 ok thank you

[@bucks1234578]

After installing a new gear reduction An dirt racer clutches do you need to adjust the clutches ? Like you did on the gear reduction for swamp asses build on his rubicon?

[@justinblundon6968]

would I have to change the gearing in a 89 Honda 300 4x4 with 27in silverbacks

[@Solitude313]

Justin Blundon It would be best yes. You could go with a 18%

[@justinblundon6968]

Do you know how much a 18% is?

[@richrichy6094]

Do they make a gear increase for higher speeds

[@Solitude313]

No, maybe there is, but not in my aspect of this sport

[@Matt-nv3yu]

What holds the pins I place after the cup is removed?

[@wyattnance6755]

late, but if you are still wondering, they are tapered, they are bigger on the backside so they stay in.

[@nathanielhill5654]

How is the rear differential holding up after this install? Did you need to upgrade the rear diff at all?

[@Solitude313]

Out of the 14 300's Ive had, I have never blown a stock 300 Rear Diff.

[@JohnDoe-nj1sd]

Do you have any GRs for sale i have a 96 fourtrax 300 4x4 nobody around here doez them or if so they want a arm an leg but im very serious if you have any available im trying to turn 27x10x14 silverback x-lite

[@nathanielmorris3919]

Does anyone know how to get a hold of jerem y lee I would like him to build me a 54% gear reduction

[@colbyfowler3819]

Nathaniel Morris Facebook him. His fb is reduction boss

[@orlinrodriguez9053]

Where did you get the gear reduction?

[@daltonshanks8921]

how tight do u put oil feed line

[@jessewilliams2337]

Where did you get the gear reduction

[@Solitude313]

Jesse Williams Jeremy Lee

[@justinsmith3371]

how much speed did u lose

[@Solitude313]

Alot, I never got out of 3rd gear tho.

[@TheHondaOutlaw]

In fact i am going to share this to the honda 300 face book page and help some of them noobies that are bugging me lol.

[@brycesanders7299]

how much speed did you loose

[@Solitude313]

Bryce Sanders Alot.. but i dont get out of 3rd gear.

[@brycesanders7299]

I was just wondering because between hole is pretty long. Could i get a gear reduction on big bear 350

[@Solitude313]

Bryce Sanders I think Don Ogelsby can make you one but it's not cheap.

[@dwrightproductions8281]

Could I do this to 2wd?

[@Solitude313]

Yes, the process is the same

[@NoahRoysyt]

no need to i sold my 29.5 ol1 to a buddy fortrax 300 2wd pulls them in anything

[@Letmeplaycoach]

Hey bud do you lose the reverse light when doing the 54% gear reduction?

[@copperhead3505]

i lost my neutral and reverse light how did u fix yours

[@alstonrowell6824]

Where did you get this kit from?

[@Solitude313]

Alston Rowell .30 sec into the video. Jeremy Lee on FB

[@alstonrowell6824]

Okay kool thanks

[@EnskeyHD]

SolitudeCustoms what is the tooth count on the secondary basket and do you know what bike that basket came off of, also do you know the primary tooth count and what bike that came off of? Just wondering, thanks.

[@bucks1234578]

Enskey the clutch basket gear is 74 tooth off a z400 Suzuki, and the primary is 20 tooth. The primary has to be machined an tig welded.

[@EnskeyHD]

curtis snow can you weld it with flux core instead

[@juancarlosvelarderodriguez8500]

Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?

[@Solitude313]

Juan Carlos Velarde Rodriguez I would highly recommend the 54%. It will go in just like the one in this video.

[@juancarlosvelarderodriguez8500]

Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?

[@juancarlosvelarderodriguez8500]

Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?

[@pinsonmayor884]

I make the 54% for 425 shipped plus cores

[@hadenpalmlund9582]

Anthony Carter do you ship to south dakota