I used to work with some Albanian electricians. All good guys! I just bought this car and I want to trick it out. Blacked out chrome. Thanks for the video!!!
@AlbanianFix3 жыл бұрын
Oh that’s gonna look sick! Post a finished video of it...
@ramirbautista4 жыл бұрын
In case the airbag inflates in an accident, could the pins on the back of the emblem puncture the airbag?
@AlbanianFix4 жыл бұрын
Not a chance. First of all, this is just the outer shell of the airbag that, when triggered, it flaps up and over, away from you allowing for the actual airbag “balloon” to come out and inflate in matter of split milliseconds. So it takes the emblem with it when whipped around. Second, the pins are not pointy but rounded off at the end so even if there was a chance for it to touch it, it wouldn’t harm anything. But all this is just advice as a DIY’er, no professional talk, please research and build your opinion. :)
@NathanThrower2 жыл бұрын
Yes, they can as they are poking into the airbag as he’s pressing it in.
@zzlatev76224 жыл бұрын
Great job! Thanks for sharing. Greetings from Bulgaria!
@AlbanianFix4 жыл бұрын
Thank you for watching Bulgaria!
@callentyler31143 жыл бұрын
pro tip: you can watch movies at flixzone. Me and my gf have been using them for watching a lot of movies lately.
@adenjordan36593 жыл бұрын
@Callen Tyler yup, been watching on Flixzone} for since december myself :)
@rontribble41410 ай бұрын
Hi Gm is there a chance the emblem that has the pens in it the new one you put on can trigger the airbag to inflate just asking a question? Also great video Thank you for sharing. It was very helpful.
@AlbanianFix10 ай бұрын
I don't think the pins are long enough to trigger the airbag but you can always cut out the pins completely and then glue the emblem to the steering wheel.
@yankodimitrov52464 жыл бұрын
I got a new emblem but still debating if i should change it. The original seems like rubber yet the replacement is hard abs plastic...
@AlbanianFix4 жыл бұрын
Yes, very true, the original is soft and is wrapped in and out the holes, something you cannot achieve anymore unless you buy a whole new airbag assembly. For me I think, this is still a good solution.
@newlife456923 жыл бұрын
@@AlbanianFix I agree.. the air bag assembly cost around 200 plus at ebay.. Fuck that
@deborapowell86536 ай бұрын
why did you take the battery cable off? Please
@DirectedFire6 ай бұрын
So the airbag doesn’t deploy while you fix the emblem. Saves you from dying
@AlbanianFix2 ай бұрын
As @DirectedFire said, in case that the airbag might deploy.
@compwiz1013 жыл бұрын
I see that the two "plugs" at the left and right side don't really have a hole to go into. Did they snug down properly, or did you have to make some changes?
@AlbanianFix3 жыл бұрын
Yes… I did have shorten those long stems in the middle and I think I clipped the two plugs your mentioning off of it.
@NickYack2 жыл бұрын
Do you think this is the same process for other Honda models like the Pilot?
@AlbanianFix2 жыл бұрын
I would like to think so, yes.
@DialissaGuerrier4 жыл бұрын
Great video! Where can you purchase this emblem?
@sPeeDeeKris4 жыл бұрын
DialissaGuerrier it should be in the description
@newlife456923 жыл бұрын
Ebay
@annraysunkcaj19033 жыл бұрын
Ty
@freedompioneer43113 жыл бұрын
Holy Gawd what a pain in the aS$!! Would repainting work maybe with some clear coat as well? Thanks for vid
@AlbanianFix2 жыл бұрын
I don’t think so because the finish on the emblem has a very shiny metallic surface. No paint can come close to original and will look very tacky and cheap imo.
@jasminereed66133 жыл бұрын
I have a 2009 Honda accord I need a replacement emblem Amazon didn't have it
@AlbanianFix3 жыл бұрын
I have it in the description, click on that link.
@juliol.74902 жыл бұрын
Hello did you find one I need the same. Thx
@NathanThrower2 жыл бұрын
Those pins should be sonic welded flat from behind the airbag cover. Those pins do not secure themselves and they are stabbing directly into the airbag itself.
@AlbanianFix2 жыл бұрын
True but that material is also very soft compared to what you can find on the web. This is only meant to be temporarily until you replace the whole airbag because to sonic weld the emblem you will have to completely take the airbag apart.
@evanhamilton67413 жыл бұрын
What year is this model? I have a 2007 that i need replaced and the steering wheel emblem holes look the same as mine
@AlbanianFix3 жыл бұрын
This one is a 2010 Honda Crosstour
@evanhamilton67413 жыл бұрын
@@AlbanianFix damn. Any idea on where I could find one for my model? I’ve scoured the internet 😂
@AlbanianFix3 жыл бұрын
@@evanhamilton6741 Take some measurements for this one, maybe this will fit you: ebay.us/4b1VAW
@سياراتحسابسيارات11 ай бұрын
How big is the logo?
@AlbanianFix11 ай бұрын
I never measured it. I just ordered them online and it came in the perfect size.
@byraerthunberg12784 жыл бұрын
I just watch vid on airbag right behind it so i am taking a pass on getting rid of my dingy H symbol.
@ItsChepps3 жыл бұрын
what do you mean?
@costalamb3065 Жыл бұрын
Or. You can replace the whole airbag unit. About $1,000.
@dllemm4 жыл бұрын
1:00 dude there's an airbag behind and you're using a sharp object, then pushing hard plastic into it
@AlbanianFix4 жыл бұрын
Yes, indeed... that’s why I first unplugged the negative terminal just in any case of an accident. As you can see, I was using the razor very carefully by first pulling the soft plastic out with pliers and then cutting out as much residue as I could. The little bits that were left (not hard plastic at all) more like rubber, I carefully pushed them down and away from the airbag since there’s room between the airbag and the leather but I guess you wouldn’t know...