Honda ADV 150 Clutch & Variator Installation

Today we Install the Clutch & Variator by Malossi. Paul takes it for a rip! And always we have some fun around the shop.
This is a really rad bike, and we're going to be hustling hard the next few months to roll out new parts. Be sure to check out our new products we're adding every day at ScooterSwapshop!
Find all ADV 150 parts here
scooterswapshop.com/collectio...
Support your USA shops!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM
PLEASE LIKE SHARE AND SUBSCRIBE! Make sure to click notifications to keep up to date on the latest and greatest happenings. ALL parts come from our shop in Portland, Oregon!
Thank you for your support!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM

[@grominwithrob1339]

Just bought a 2022 ADV 150. As soon as your kit is back in stock, I’ll be buying it.

[@Scooterswapshop]

best to call and special order as they dont sell super fast so we dont order as quick for stock at times call today after 9 and we will get it ordered that way less waiting for ya

[@druchi14]

“OH YEEAAHH!” - Cool Aid Man

[@Scooterswapshop]

thats it!

[@phildinovo]

Anyone know where I can find a pic of the service manual diagram for the CVT block bolts? My dog screwed up my perfectly placed pattern of bolts lol

[@zulie20]

how long would you say it would take to install just the Variator i bought one from you guys and when it warms up im having the local shop install it

[@kaerprime7403]

What are the specs of the stock contra spring and clutch spring? What RPM?

[@b5rider]

What is the recommended roller weight if you just switched to the Yuminashi variator and left the clutch stock?

[@Scooterswapshop]

watch our cvt videos we hav a play list

[@MrGanjaman178]

Hello good, I have a pcx 2013 esp and I have 17gr oem rollers, what do you advise me to mount? 16gr, 15gr? Tech pulley ... Dr pulley, variator or clutch to run much more, thanks

[@Scooterswapshop]

English?

[@joelstinson3316]

Where do the guide pins / dowells go?

[@oneamysc69]

Is yuminashi CVT with mix roller 12g &13g + yuminashi clutch bell is good to Install with stock honda adv 150 bike? Any recommendations of rollers or etc to be change or add on?

[@Scooterswapshop]

call the shop we can get you the parts you need

[@oneamysc69]

@@Scooterswapshop I'm asking a question here boss. Some advise, tips or etc.

[@Rammer_Jammer]

Which clutch and variator do you recommend for the 2019 pcx?

[@Scooterswapshop]

Malossi. As we just used in the video we stock them

[@degenerateactual3080]

Are there any clutches and variators that will fit a CH150? I know that the rest of the aftermarket is dead dry on those

[@Scooterswapshop]

Man thats a hard one, just had paul look theres never really been any aftermarket support for them. if you find something let us know! and make sure you subscribe we got some cool stuff coming up giveaways and more!

[@degenerateactual3080]

@@Scooterswapshop so far the only thing I’ve heard of is a mention of people modifying GY6 components to fit. But there was no explanation of how those parts are machined or otherwise modified to fit. Perhaps machining the splines to fit?

[@oneamysc69]

Hi. Need help. What CVT set do u recommend for standard adv 150? I'm 80kg.

[@Scooterswapshop]

call the shop or email with what your trying to achieve

[@s.a.f.r.a6403]

Do you perhaps know a place I can check for engine diagrams for the adv150 engine I'm interested in knowing valve sizes and such but info is slim although much of the engine seems to share ancestry with gy6

[@Scooterswapshop]

It is nothing like the gy6 and there isn't really anything available what are you trying to do?

[@s.a.f.r.a6403]

@@Scooterswapshop I wanted to see the exhaust and inlet valves differences compared to a 150cc Gy6's valves

[@gerardofiano4866]

What are the recommended rollers for maximun top speed? Malossi variator and clutch.

[@Scooterswapshop]

give the shop a call talk to Brandon hes the last to change the rollers not sure what he used last.

[@JulitoPapitoo]

Definitely getting in on the next giveaway

[@Scooterswapshop]

Its a good one! Glad to hear!

[@phat56pat]

Give the video a like for paul

[@Scooterswapshop]

paullllll is the man

[@taylorgray6223]

Yall need to hit up small bore rally in Tennessee this year

[@Scooterswapshop]

We’d love to but it doesn’t really help our business it hurts it due to the fact that we’d be two weeks behind on shipping orders. We did in the past

[@P2DAPIPE]

Be good to see a before and after speed wise.

[@Scooterswapshop]

Top speed is the same due to the factory computer.Just accelerates quicker!

[@mariovh]

@@Scooterswapshop is it significantly better ?

[@mariovh]

is the difference significant after the installation in acceleration and speed ?

[@Scooterswapshop]

we have a video all about this

[@mariovh]

@@Scooterswapshop can you pls send the link ?

[@jebot2]

what's the weight of the fly ball you used?

[@Scooterswapshop]

Fly ball? flywheel? Not following whats the question?

[@Lakbay214]

@@Scooterswapshop the 6 rollers, How many grams do you used? not sure how do you call it.

[@bobbiemordeno]

Use the 20grms ball , but modified the pulley.... grinder the pulley little bit where you put the balls, removed the corner .... Replace the clutch and clutch cover. That perfect.... then try to ride... Smooth ride but give you much speed. Or you can do it a combination of balls... 3 pcs of 18grams & 3 pcs of 20 grams.... You will amazed.... I use it on my ADV 150....

[@Scooterswapshop]

Noooo don't do that....

[@Aisiu12]

Hi, does this affect the fuel consumption significantly? I don't really mind much about the top speed, would be good if can remove the limit, but I would prefer a bit more pick up..xD

[@Scooterswapshop]

fuel consumption only if you ride it different. aka more wide open

[@itzerisadomeeiot4980]

it will add fc more if you put to much rpm on both pulley ug torque drive but top speed will suffer

[@enricosegovia1680]

Sir may i ask the size of the polini flyballs for adv150 thanks

[@Scooterswapshop]

the what?

[@enricosegovia1680]

@@Scooterswapshop what i mean is the size of rollers for adv150 for pollini variation

[@grominwithrob1339]

Feels the nitric oxide synthesis surging through his body. 5minutes later he’s clocked running by a speed trap doing 45 in a school zone bare foot in his underwear. N.O. EXPLODE BABY!! 🤯

[@Scooterswapshop]

I like what you did there

[@grominwithrob1339]

@@Scooterswapshop On a side note NO explode tastes great and aids in your recovery as well.

[@iup247]

I miss those scammer calls. They were the best fun 😂.

[@Scooterswapshop]

We just had some in a recent video!

[@rayjune3531]

How much grams are the rollers?

[@Scooterswapshop]

we have tried a few check our recent adv videos

[@mopedmessiah]

If you guys ever figure out an easy way to kill that speed limiter, id love to see. This bike is so tempting, but it only doing high 60s is whats killing me on it

[@Scooterswapshop]

We have added 10 mph working on the video, and working on the limiter soon.

[@mopedmessiah]

@@Scooterswapshop holy crap you guys are awesome 😂. If possible, maybe see how much you'd get just with the speed limiter removed or speed adding mods to work around it. From videos, im actually fine with acceleration on the bike, i just cant get over that top speed. I know its only a 150, but the fact that they put a speed limiter on a $4500+ bike really rubs me the wrong way. Other things like the drum brake i can get over, that speed limiter is the one thing that really turns me off about it

[@Scooterswapshop]

@@mopedmessiah we’ve already got it to 80 ish on the dyno. Just fine tuning now. 75+ won’t be An issue

[@mopedmessiah]

@@Scooterswapshop is that with the cam and pipe on it? Or stock numbers? Thats impressive man. Hopefully when i come on a road trip to vegas next year or so i can try to get my bike in to get dynoed. Itd be an honor to unleash the lawn mower storm up in Portland 😂

[@Scooterswapshop]

@@mopedmessiah so that is with a cam and pipe, but it should be able to get into the 70’s with nothing but cvt. We hit 81 on the dyno as it stands, my guess is we will be 90ish when tuned and dialed on stock piston/cyl

[@rcash3625]

.... When are they going to give us the adv 350 in the states... Or the bigger x adv 750... To get Americans to bite they should have brought the 150 & 350... The x adv is a big Ike so I get waiting for interest. But u can do highway speeds on the 350

[@Scooterswapshop]

powersports.honda.com/street/adventure/nc750x

[@pocofon8383]

You should try other clutches and variators from South East Asia which is much better for the ADV 150.

[@Scooterswapshop]

Working on that. The issue is most the companies selling them aren’t really great at conducting business.

[@pocofon8383]

@@ScooterswapshopI understand your concern with trying to do business with these companies. Try TDR.

[@googleprofile6660]

​@@pocofon8383 I've got the TDR variator for the nmax and the stock variator seems to work better

[@scootertweaks]

So, what's the verdict? Out of the box Malossi setup with 12g Malossi rollers, standard white contra and white clutch springs? Good? Way better? BTW I've been uber impressed with DP sliders in the Malossi multivar. Ready to see your other results!

[@Scooterswapshop]

For the adv?

[@scootertweaks]

Yes! Curious how the test ride went vs stock!

[@Scooterswapshop]

@@scootertweaks adv you need 16-18g. The gain was huge feels like 50% more acceleration

[@paullawrence9412]

Dr pulley makes the correct size for the malossi adv variator, however they are far too light.

[@britengineerinmindanaothep9376]

hello I am very interested in what you will be doing to the ADV. I am British and have retired to the Philippines. I used to race Lambretta's when i was younger and have always been into scooters, before i moved to the Philippines in the UK i had a Piaggio X9 250 and a MP3 500 ABS Sport. I now have a Honda Beat 110 Premium 2020 and just bought a ADV that i am going to upgrade, the ADV here comes with a rear disc as stock if you want any pictures of that i can send you, Any parts you design i would be interested to market or help to sell in the Philippines. i did buy a flat seat that came from Thailand. check out my channel on KZbin. TC Guys thanks Bill

[@Scooterswapshop]

thanks.

[@garrettmaddox1629]

This cat sounds like Ferris Bueler

[@Scooterswapshop]

Is that a good thing? Bueller..... Bueller....

[@mackthol]

Mallosi still the best?

[@Scooterswapshop]

for speed? yuminashi we have it in stock

[@mackthol]

@@Scooterswapshop for the CVT full set up what brand can you recomend?Straight Yuminashi?thanks brother

[@itzerisadomeeiot4980]

expensive aftermarker parts not even worth the price in our country we modify cvt parts if you know what I mean

[@googleprofile6660]

Yes you're right

[@aloysiussalas3272]

Sir can you send me those parts..

[@Scooterswapshop]

yeah send us money and we will send you some

[@runningbear211]

You should do strictly scammer videos from time to time

[@Scooterswapshop]

I try to cut back on them. As it’s time consuming. I got some amazing ones coming in the next videos however

[@runningbear211]

@@Scooterswapshop well I really think the are hilarious

[@phat56pat]

@@Scooterswapshop maybe we will make a scammer KZbin channel for raw clips lol

[@Scooterswapshop]

@@phat56pat people ask non stop

[@ronsteitz4535]

Wit only 55. Miles why change things out until engine is broke in.🫣 This is not a fair test.🤔