lol, it was an awesome idea to add some fun bits between all the bike stuff. it’s like a little home movie. :)
@tonyspijker55695 жыл бұрын
Australia loves this build!
@heritagehillsecurity8778 Жыл бұрын
And we love Australia. From Fremantle to the Hunter Valley NSW, everything is the best in the southern hemisphere, maybe the world. I was a guest while in the united states navy Australia four times. Good times. Lots of good posty bike builds down under. 🇦🇺
@griffcoleman5 жыл бұрын
Gotta say I’m super thankful for this build series! I have an 81 c70 passport that I’m looking to do the exact same things to, custom bars and new bigger engine, rear fender cut, new paint job. Excited to see how yours turns out! I’m hoping to have the right gearing and enough power to cruise at 50 to 55. Gotta find an engine I can trust for that.
@RollingWrench5 жыл бұрын
Sweeeet dude! Thanks for the support 🙏 . I love the Honda cub!!
@gooble695 жыл бұрын
Great series, can't wait for Episode 7!
@PaumotoRacing5 жыл бұрын
Philippines also watching you!
@onduwey75584 жыл бұрын
greetings without fenders from Indonesia
@Rob-hx6on6 жыл бұрын
Been following this from the start, great to see it coming on, all the best from Scotland
@RollingWrench6 жыл бұрын
Niiiice! It’s so interesting to see different parts of the world watch my episodes. Primary Asia is who watches this series
@mulyadimeox38785 жыл бұрын
Oke,nyentrik Jack. Sangat detail ngasih keterangan bongpas, (bongkar pasang) bro.
@renegade19876 жыл бұрын
love this build series - i have 3 cubs all in different stages of completion, so lots of inspiration here!
@RollingWrench6 жыл бұрын
They are so fun to build. It’s a challenge all the way across the board, parts especially. It seems like there should be more available being this is the most produced Motorcyle in the world, with over a million units made :-)
@gpap92726 жыл бұрын
Greece also see you . Good job !!!!!
@RollingWrench6 жыл бұрын
Thank you 🙏
@ZachosK5 жыл бұрын
watches*
@unboxingmaniac50505 жыл бұрын
We say in greek that bike, strogilofanaro (that means "round headlight" in one world
@Smallbore2wheels6 жыл бұрын
Hell yeah! The street cub is looking awesome 🤙🏼
@RollingWrench6 жыл бұрын
Thanks dude! 🙏
@jaferimadin58693 жыл бұрын
Great work bro..
@user-it9eu9li6g6 жыл бұрын
Greetings from Greece man , great work
@TheVideoZombie5 жыл бұрын
Thanx for new episode man. Really nice bike you are puting together there
@RollingWrench5 жыл бұрын
Thanks for the positive vibes 🙏
@mattdamiron5 жыл бұрын
Awesome should really consider a vini racing motor swap from Dominican Republic engines range from 70cc up to 190cc full bolt on but the most popular is the 160cc search it up
@RollingWrench5 жыл бұрын
I was looking at the Daytona motor, or importing a Honda wave motor bores to the max!! :-)
@wj32196 жыл бұрын
Looks awesome. My build is at about the same stage. Been obsessing how to do the handlebar thing so this video is perfect timing. Just need to order the new bars. I’m going to mod the bars cutting and by welding smaller bars in the ends to use the stock controls. Like you I’m going make own bracket for bars. Thanks for the inspiration! Great vids.
@RollingWrench6 жыл бұрын
Niiiice!! It’s super cheap to build your own bar mount, just takes fooorever! All of the StreetCub peeps are coming out of the woodwork. I love it!!!
@megatrahizaadramly70755 жыл бұрын
Me too...stuck at handle bar. Now got the ideas how to diy.thanks.
@brennenervin83215 жыл бұрын
All your builds are amazing...i got alot of help from your videos...i wanna buold costom scooters for a shop...maybe ill get lucky one day...
@megatrahizaadramly70755 жыл бұрын
Good job friend... I inprogress to build Honda GBO C70 to become a street cup. This video give me a lots of ideas and also learning. Thanks bro..
@RollingWrench5 жыл бұрын
Nice! Thanks for watching and the support🙏
@ruddyrabe3 жыл бұрын
mooooore cub updates MattMan!
@RollingWrench3 жыл бұрын
I know!!! Sheeeesh
@CO-LOBEATS5 жыл бұрын
awesome build can't wait for the next vid !
@markskupinski40095 жыл бұрын
Looking good brother. Keep it up my cub feels like its taking forever as well
@RollingWrench5 жыл бұрын
It’s just as much work looking for parts as it is building :-)
@bhimugobbur25335 жыл бұрын
Am from India... i just loved ur work... all the Best Bruh... hv fun...💐💐
@volkanalm5 жыл бұрын
Hey, hope to see the final produkt of your projekt. Sweet this Street Cups. Really. I geuss they just little and sweet, but finaly you have to modify 99% of a bike to get it done. Because it is a hole motobike. Even if it's very little. IThe experiance you obtain, is like building a hole Motosikle. Not everybody thing. As hobby in free time, it"s worth, man. The experiance you obtain, it's Worth. A modification in this degrees is most difficult. A rebuild is much 'n more easyer, cause you have all the sizes from manufaturer. A new build is even easyer, cause you can set the sizes on your own, which have to fit on your plan for the project. By modifing you have to change all which does not fit to your mod. Can cost more than you thought befor. Wish you all best and nice regards from Istanbul. Thanks (Teşekkürler) for the vids.
@RollingWrench5 жыл бұрын
This is true! Definitely easier to start from scratch. I build Ruckus scooters from scratch because you trash most of the parts in the build. Same goes with this build. It’s been sooo fun! Very drawn out project though. Thanks for watching and your support 🙏
@volkanalm5 жыл бұрын
@@RollingWrench Main sence is enjoing a hobby and having fun, sir engineering. Have a nice day. :)
@AzlanZ4 жыл бұрын
Apa Khabar Streetcub Lover.. Greeting from Malaysia ..
@xavier219906 жыл бұрын
Awww. 😢 I wish you could've kept the original headlight. It looked better IMO. Hello from the Philippines, by the way.
@EstarlinMendez5 жыл бұрын
Good motorcycle . The honda super cub is very good and fast with modifications .
@JeMalbas03855 жыл бұрын
Smooth as butter👌 i love your video bro keep it up 👌
@sttsoukalas5 жыл бұрын
Looking good man, you should have asked your subscribers about the bottom plastic part! We have tons of them in Europe.
@RollingWrench5 жыл бұрын
Good idea! Dang it!
@rcpch.53255 жыл бұрын
I watched you build your bike, It's so excited and awesome. I like your rear wheel, It's so big and look to cool. Thank you for Thai speak, It's good sound. Thailand. ขอบคุณครับ
@RollingWrench5 жыл бұрын
I would give anything to live in your beautiful country 🙏
@rcpch.53255 жыл бұрын
@@RollingWrench when I finish watched your video, I have inspiration to rebuild my bike. I think keep going to do it.
@RollingWrench5 жыл бұрын
Ratchapol Ch. do it! You have access to all the parts in Thailand. That was most of the efforts in this build:-)
@rcpch.53255 жыл бұрын
@@RollingWrench OK, I promises to do it and I will update to let you know.
@Melyp295 жыл бұрын
Rolling Wrench where you buy the rims?? Please
@ramandaalmashkhadafi67105 жыл бұрын
Wahh kereen iam from Indonesia
@egiotaz77785 жыл бұрын
love from greece!!
@mickeycollins31085 жыл бұрын
Damn fine work and funny as always
@juwel25465 жыл бұрын
My from Bangladesh you are awake look awesome
@deanraddick90413 жыл бұрын
Hey just bought my first cub and I feel like 100 years old, just randomly found out how amazing these bikes are and I’m 37, yes I’ve bin living under a rock, what I’m curious is, what’s the tire size of your tires, I’m curious, I have the real skinny skinny, ones, when you got some time, a guy starting a cub journey in Ontario Canada
@gerwheelz31545 жыл бұрын
very nice work 👍
@ryandumapit65176 жыл бұрын
Pilipinas ma'h men!😎 Nice one!
@rommelricafort33515 жыл бұрын
at 22:12 Engineer + Dancer = Matt awesome!
@GiancarloFloyd5 жыл бұрын
Damn you need a vice, you make me nervous when you drill holding parts or step on them. I got 30 stitches in my hand doing that.
@krisley5178 Жыл бұрын
This has been a great series. I'm really enjoying it. One thing tho... I can't believe you're betting your life on that flimsy little 1/8" sheet metal disc for mounting the handlebars. An then spacers on top of that. Super sketch dude. As I said, it's been a great series so far, I'm just worried about your safety Brutha.
@RollingWrench Жыл бұрын
I think you think it’s thinner that it is. It’s thicker than the stock piece. Thanks for watching.
@markbaui50975 жыл бұрын
Im thinking to restore old cub.but watching ur videos i think i would try to costumize it
@Edog13825 жыл бұрын
Hello from Cambodia! 'Sues-Day" (Hello in Khmer) Loving the build bro! Keep up the good content!
@RollingWrench5 жыл бұрын
Thank you 🙏 I want to visit Cambodia soooo bad!
@Edog13825 жыл бұрын
@@RollingWrench Perhaps a shameless plug on my photography tour company. www.SiemReapPhotoTours.com Please come and visit. I would be stoked to show you around the country on... perhaps some "underbone" bikes the Cambodians have never seen. This calls for a build! Hit me up brother. @SRphototours
@RollingWrench5 жыл бұрын
Elliot leuthold very cool! I will share this with my wife! Maybe we will someday meet??
@paladinallinone55202 жыл бұрын
u can get the new plastics from honda and they will fit perfectly
@RollingWrench2 жыл бұрын
Whaaat? Like the new cub?
@ngurahsuputra67525 жыл бұрын
You should look at Indonesia Streetcub for your reference, because in Indonesia there are many types, variations and solutions to problems in your video can be solved by Indonesian modificator. I like modifying you, but there is something that needs to be improved, hopefully it will be better.
@jimmycone37176 жыл бұрын
Nice work i just had a 1962 Cub given to me that need a complete rebuild, haven't decided yet if im going to street it or trail bike it either way it'll be a restomod build. Keep up the videos i enjoy the builds.
@RollingWrench6 жыл бұрын
Very cool! Do you have a Instagram? I would love to see it
@jimmycone37176 жыл бұрын
No not yet soon.
@jimmycone37176 жыл бұрын
@@RollingWrench @jconesr
@jimmycone37176 жыл бұрын
@jconesr just acouple pics still figuring out the Instagram
@swordnclay60392 жыл бұрын
Makasih banyak 😀😍
@SGOBTK5 жыл бұрын
Keren..joss..😎👍👍👍
@roywalls55955 жыл бұрын
When RTX come in i take a picture show you look like your built! I be up grading put in triple gauge & wire harness because scooter have no gas gauge & rewire under seat add a fuel sending unit sensor! Long time ago my teacher told me i have gift working on cars & motor bike just looking at it!
@RollingWrench5 жыл бұрын
Show me by tagging me one Instagram.
@felipemedina36014 жыл бұрын
hey man nice project, im gonna start my new c90 restoration process thanks for make this video , id like to make a channel to share my experience too
@tera39625 жыл бұрын
Indonesian love street cub much😋😋
@odevious80816 жыл бұрын
*Yesssss!* I wonder if you can fiberglass the bottom part of the broken original handle
@RollingWrench6 жыл бұрын
Maybe, I’m afraid it wouldn’t look clean enough
@marcotulioperezdiaz98603 жыл бұрын
I await your answer, thank you and where can I get it?
@W4WEnglish5 жыл бұрын
Great work keep up! I think you fitted the one bar clamp tge wrong side, that's why the lettering is upside down.
@RollingWrench5 жыл бұрын
Thanks you! Ya it does appear that way. It wasn’t though
@marcotulioperezdiaz98603 жыл бұрын
Good morning is to know what type of scissors was used in the honda c90 super cup
@yamaha04rider5 жыл бұрын
you couldve got bar risers for the handlebar clamps off of ebay instead of making all of thatand itll be solid
@RollingWrench5 жыл бұрын
I tried, they never sent them. I even ordered off a random website. Same thing. I’m happy with my built ones :-)
@rudsylphy52425 жыл бұрын
Makasih banyak🤩🤩🤩
@frankieboy24945 жыл бұрын
finally!!!!
@DoRC5 жыл бұрын
The Mazda rotary in me wants to call it a street port
@kallenvallmurti32005 жыл бұрын
I’m going to have to sub to see the results of this cub. : )
@iamnotyour_bae5 жыл бұрын
nice streetcub , btw i have streetcub too. i'm from streetcub indonesia
@roywalls55955 жыл бұрын
I can`t wait for episode 7 come out ?
@RollingWrench5 жыл бұрын
I should have episode 7 out in January. I will be in the Caribbean all of December:-)
@asten96475 жыл бұрын
Put an lifan 160cc engine in it..and change to honda ex5 wiring to it..malaysia also have alot street cub dude..you can also search in mudah.my for street cub parts,to be specific search "honda C70"
@RollingWrench5 жыл бұрын
Great tip! Thanks you🙏. I’ll look into that
@asten96475 жыл бұрын
@@RollingWrench can't wait to see the bike my guy 👍
@effends4 жыл бұрын
Need your help here, how did you mount the spacer at the brake..did you do machining/ welding? at 2:42 ..thanks in advance..
@ariwibowo56064 жыл бұрын
Makasih banyak
@TheVideoZombie5 жыл бұрын
oh yes,
@edgarpulidorodriguez32963 жыл бұрын
Desde Colombia sigo sus episodios, quiero personalizar una Honda C90,
@rolandramoso20515 жыл бұрын
wheres the episode 7 ,I can't wait to see it sir. I wish you great a good job that bike. I'm from Philippines waiting for next episode
@RollingWrench5 жыл бұрын
Ahhh. Episode 7 is slowly in the works :-). Thanks for supporting my channel!
@alvinus703 жыл бұрын
I'm looking to get better rear shocks for my cub, Would you recommend that black and gold set that you are using? Does that more modern set actually give a much better ride?
@edgarpulidorodriguez32963 жыл бұрын
Algún consejo para iniciar el proyecto, le agradezco su comentario
@zacy89385 жыл бұрын
I like it bro but sorry i have question how size your tire?? I sorry i from indonesia my speech is bad. U cn answer bro
@superkas5 жыл бұрын
You are welcome!
@taypat5 жыл бұрын
Are you utilizing an aftermarket harness or reusing the old one?
@fernyroman4 жыл бұрын
ru going to sell the handlebar plate and risers or atleast the plate
@JoséVieiraDantasfilhoАй бұрын
Deixa o projeto dessa mesa
@JuanRamirez-eg6rl6 жыл бұрын
SUPER cool
@RollingWrench6 жыл бұрын
Thank you 🙏
@leonelbyshernandez85893 жыл бұрын
Hey, I have a little project on my own. Question what sizes are those rims and tire? And where you got it from? Thanks
@mlbb0115944 жыл бұрын
Im still waiting for next episode. Please upload it I'm currently building mine. Thank you
@mlbb0115944 жыл бұрын
Hi. Im planning to widen my fork also. Do you think its safe? I just really love the classic look if the fork. Pls reply
@ricardomaya5106 жыл бұрын
great chanel !!!!
@RollingWrench6 жыл бұрын
Thank you for the positive vibes! KZbin can be a very negative place. It’s nice to read this type of comment!
@user-om5ni1uj8b2 жыл бұрын
What is the size of the rear wheel? From Thailand
@mariorodriguez77304 жыл бұрын
Salvadoriam too
@meostars5 жыл бұрын
I know this isnt a gy6 video, but ive looked all over for a Naraku DC Adjustable cdi for my gy6 150cc i was wondering if you had one on your site of if you could point me in the right direction. Big Ups and Great Videos
@ardan49112 жыл бұрын
🇮🇩🙏 terimakasih
@thejam58133 жыл бұрын
What is the size of the rims and tires?
@libraagriska80425 жыл бұрын
nice... gue juga mo bikin street cup ..joss
@user-pk3kh9di6n5 жыл бұрын
จากไทยแลน สุดครับ
@yasbierror94605 жыл бұрын
จากไทยเหมือนกัน
@georgeteli89275 жыл бұрын
Can you put the links of the swing arm and shocks in the description and the wheels and tires.
@RollingWrench5 жыл бұрын
The build list is on my Patreon Page
@georgeteli89275 жыл бұрын
Do I have to pay to see it?
@mafu465 жыл бұрын
Hello what type of engine you using? To pair it with the fuel injector system
@phillipmunro24214 жыл бұрын
Nice bike...where can I get that swingarm from?
@justineaves19776 жыл бұрын
Greetings everyone in Indonesia👍 scoot scoot
@RollingWrench6 жыл бұрын
I will visit your beautiful country someday soon :-). Thank you for the support
@arih.18165 жыл бұрын
Dari mana lek? Saya semarang
@alanperez80885 жыл бұрын
better with the original headlight - handle bar unit
@marcotulioperezdiaz98603 жыл бұрын
I am from Colombia
@mgzsanchez25026 жыл бұрын
Whats the size of those tires? Nice bike bro
@ferdiepetallo91285 жыл бұрын
im realy excited for this job. im from Philippines
@colejohnson3075 жыл бұрын
has anyone done the big bore kit on a super 8 if so how much oil do you add to the gas?
@sadikaitallal56025 жыл бұрын
👍
@gabrielgamboa6806 жыл бұрын
al fin
@EduardoMendoza-tj5td4 жыл бұрын
Hay good vídeo, me podrías dar las medidas de la platina que va en el tren delantero de la moto.
@j.patino81485 жыл бұрын
you need to improve the front brake and suspension systems