Honda CB 350 Wheel Bearing Damaged | How To Diagnose | Not A DIY

[@souvikchatterjee3726]

Good information. Utpal is the best really for this!

[@thoughtred9876]

Can you please say which bike in normal honda wheel bearing will set to cb 350 . Ex: oil filter (sp shine) lk tat. Hope you understand

[@arunkannan5792]

Can you make an vedio on conset inception and setting 😊...

[@DipayanBose]

Next time I have it replaced or serviced, will definitely record and make a vlog.

[@arunkannan5792]

@@DipayanBose thanks for the reply bro..ride safe 😎

[@abhi_sun_31]

@DipayanBose can a play in the front wheel bearing lead to handle wobbling issue particularly in CB350

[@DipayanBose]

Yes it can. But mostly wobbling issue comes from front tyre manufacturing defect or improper installation.

[@abhi_sun_31]

@@DipayanBose got it. Thanks.

[@Adv.AJALKUMAR]

What is UU?

[@amarnathvv]

Hey Dipayan ! In My CB there is this small squeaky sound when turning the handlebar but can only be heard when the vehicle is on centre stand not on the go . Is this bearings or something else ! I've done 9k kms on it .

[@DipayanBose]

@@amarnathvv most probably it’s coming from the cables. They are closely packed which is normal. Unless you feel any issue while riding with regards to making u turns or manuvearing the bike, handle bearing (cone set is perfect)

[@amarnathvv]

@DipayanBose Thanks for your reply! No I don't have any issues in maneuvering the bike . Maybe it's the cables!

[@zoachenkual4035]

Brother could you please tell me what's the size of the front wheel bearing and the rear wheel bearing cause the dealers don't have these and i have to replace mine..

[@DipayanBose]

FRONT WHEEL 6203UU x 2 Rear Wheel 6303UU x 2 6204UU x 1

[@psherigar]

Have you replaced the handle bar? I have a cb350 hiness and installed handle bar risers but still experience shoulder pain on long rides. Any recommendation. I am 6 -feet tall

[@DipayanBose]

Handle bar is from Art of motorcycle. Pls watch my initial impressions about it. Sharing the link kzbin.info/www/bejne/hpS1qWSwltN-p6ssi=dyFYmy4LSSJrxlCW

[@2wheelsoulbiker526]

Ramram bro🙏, As usual very good info from you. kudos❤ Btw pls share the individual bearing numbers. 💔 No parts catalouge...

[@DipayanBose]

Front wheel 6203UU (2 pc required) Rear wheel 6303UU (2 pc Required) Rear sprocket 6204UU (1 pc required)

[@kira._kira]

when to change fork oil ,spark plug and cone set ? sir

[@DipayanBose]

Cone set depends highly on how it is maintained and what terrain it is ridden at. Generally a cone set should last for 15000 kms at least for our Indian roads. Spark plug at every 10000 kms. Fork oil every 15000 kms.

[@kira._kira]

@@DipayanBose Thank you ❤️

[@abhinav_7476]

Nice information.. Thanks

[@thoughtred9876]

❤❤❤❤❤ awsome

[@Startekselva]

Why SKF NO NBF OR TATA OEM SUPPLIER

[@DipayanBose]

I have had very good experience with SKF earlier.

[@debanjanchatterjee3420]

Really informative. Sir I ride Rs and if you can suggest a good service centre in Kolkata for regular maintainance as I feel bigwing overcharges a lot.

[@DipayanBose]

You cannot get all the parts required for service outside bigwing. So better give to bigwing only. Yes since it is the premium outlet of Honda, so its a little costly.

[@debanjanchatterjee3420]

Does the same bearings attach to cb350 Rs?

[@DipayanBose]

Yes

[@HANUMAGANGADHARKottapalli]

Hi bro Nice information..I am facing wobbling issue and my bike ran 5k till now. Where did you get the bearings from. Can you pls help with any website where we can get spares for CB350RS

[@DipayanBose]

Check your front tyre. If possible have it replaced. Wobble will be sorted. You could get the OEM parts only from big wing that too you need to convince them a little. No online store. But parts like wheel bearing, you could get from any Auto store. You need to provide bearing part no. And you would get it. Make sure to get a good branded one. FRONT WHEEL 6203UU x 2 Rear Wheel 6303UU x 2 6204UU x 1

[@RidewithJoy1]

Good info ❤

[@lucylst9]

Hi bro. I see that you installed a top box. Any wobbling you are facing?

[@DipayanBose]

It used to wobble with top box in my earlier set of tyres. Not anymore. Actual culprit are the tyres.

[@lucylst9]

@@DipayanBose good to hear. Which tyres are you using now?

[@DipayanBose]

@@lucylst9 replaced with stock.

[@lucylst9]

@@DipayanBose but bro I don't understand. The tyres you replaced are also stock ones. What changed

[@DipayanBose]

@@lucylst9 there is some manufacturing defect in these tyres. The ones which came pre-fitted from factory. Thats why few wobble alone, few with top box. Best solution is replace the tyres.

[@kingsman045]

From where we get this bearings bro????

[@DipayanBose]

Any good spare parts store

[@rajahmuthaiahsolaitr9538]

Worst quality bearings in Honda Hiness…

[@andymotovlogs546]

0.23, bad positioning for safety buddy, just roll down the throttle a bit and get that space cushion. I know that car driver is at fault eating into your space cushion. again at 2.08,3.04,5.30, 5.57, 6.02, I can only see your lack of awareness about keeping the space cushion. It is not worth it buddy.

[@sumithsuresh4099]

Bro, u kidding? If people start riding in the way you are recommending, then they’ll never reach their destination. If you are an Indian then you should realise that this rider is riding very normally! Nothing to be afraid of

[@andymotovlogs546]

@@sumithsuresh4099 Our most important goal must be to reach the destination safely. Let it be any place in the world, the rules of safety remain the same all over. It won’t make you too late if you ride safely but it can cause serious injuries and expences if you ride otherwise. It is not worth it. Also dont forget to wear the safety gear all the time bacause it takes a split second for the injuries to occur.

[@rv6569]

I checked the timestamp. He kept adequate spacing. I totally respect your opinion. Maybe the camera makes it look narrower. ❤❤