Honda CB500F - Air Intake Upgrade

[@zsinormotors]

►Air Intake: amzn.to/48l9Cwc ►Allen Key Set: amzn.to/48mDc4E ►Screwdriver Set: amzn.to/3vrdnBK

[@rainerhasler135]

Great! I know now what to do to increase the power of my cb500X if the intake of the cb500F is the same! Thank you so much!

[@KeepItSimpleSailor]

Did you do it? I’ve got a 2023 CBx

[@hex_surfer4588]

Fuel and ignition maps on restricted and non-restricted CBs are different. Proper remap would improve the things after funell replacement.

[@alexdks1995]

It's really better ?

[@خالدعبدالله-ل3س]

What will gonna happen if removed the lams totally and make dyno tune I'm about to do that

[@Jammin6796]

for those asking about buying these intakes,, the manufacturer of them stopped making them,, so instead you can dremmel away the plastic to open up the existing intakes.. same outcome,,, 5hp boost, with this alone, not really sure about that.. maybe with a remap you can get there,,, but any hp boost from this alone would be worth it for so little work... running leaner maybe save on the mpg's also..

[@zsinormotors]

I can feel a difference with these intakes even without a remap.

[@YTUA1983]

@@zsinormotors Hi mate can you give me the details of the guy who used to make them please ?!

[@M.T...Mt..Mt...12]

What kind of difference do you have?

[@riccardodiana9351]

hello, would you have the link to buy it? thank you

[@Mackie01]

I want those intake tubes!! do they sell them online?

[@YTUA1983]

Me too!

[@max32022]

where can we find this product? is it aluminum?

[@batuhanmetin9546]

What changes have happened to the engine after the modification?

[@Chickendave344]

Note

[@albertobenito8079]

Donde puedo comprarlos gracias

[@adamkovacs6301]

Hello , érdekelne hogyha simán ki vegyem a műanyagot és nem teszek helyébe semmit , tud történni valami féle károsodás ? Vagy akár milyen légörvény ?

[@MrChokoto]

do you have a reference for this part?

[@esavuorenmaa774]

Where can i buy this part?

[@DonVi]

The internal diameter is same or is more big ?????

[@bartizq]

Original ones in this video are I believe the ones that go into EU models where there's an A2 license restriction. They're a bit blocked on the inside, ordered US ones that are fully open. Just not sure whenever you should do any remapping.

[@kostja2373]

do you have more power, performance with it? and does it have to be coordinated?

[@zsinormotors]

You can feel the difference (5HP).

[@kostja2373]

ok wehre i can buy this?

[@noelevan3489]

@@zsinormotors wow that's huge hp increase

[@1964mjc]

Doesn’t bike run lean now ?? Or do you add fuel mapper ?

[@silver.grey46]

Same question over here

[@hex_surfer4588]

It will run leaner but it's not an issue - OEM map is veeery rich at WOT.

[@paulobarus3385]

Hello, can you explain me the difference between this and the originals intake ?

[@iiGingiey]

the original intake has a little slope on the inside that kind of restricts the airflow, by removing the slope as well as having a straight funnel instead of curved, you get better airflow. or you could just take out the funnels you have and dremmel off the slope since i cant seem to find these funnels shown in the video.

[@the_E4_Mafia]

It would have been nice if you would have narrated what exactly you were doing when putting the new ones in, it seems you were having trouble getting the in their correct position?

[@texasmoneymob2564]

I just ported mine and I got about the same gains 👍

[@hugodanalves]

Did you notice any torque loss on lows? Did it need a remap?

[@ThaRealChiefObiEgusi]

was yours restricted? non US model?

[@fchanMSI]

Will this affect the 3rd party filters like K&N or DNA from be installed?

[@anjomendes]

How upgrade power?

[@zsinormotors]

At around 5HP.

[@ThaRealChiefObiEgusi]

@@zsinormotorswith remap?

[@Benjamingt4]

did you have to remap it?

[@stanleyblazeraznik6047]

Always.

[@kiliankollegger5692]

What does remap mean?

[@spwn6738]

@@kiliankollegger5692 late but it means to adjust fuel air ratio on the ecu fuel map. Need to do it every time you mess with air intake exhaust or fuel to protect ur engine and make use of the extra preformance

[@YTUA1983]

@@spwn6738 Never too late, someone else will always need info like this incl. myself!👍

[@leodagan566]

A Link please

[@YTUA1983]

Still waiting!!!

[@jaypetter]

Hey, great videos!! Thanks! Couldn’t believe how restricted the intake is when you show the plastic intake. Could you share where did you get those aluminum ones please?

[@zsinormotors]

I bought them in a local Honda dealership (in Hungary).

[@rodrigocebola8231]

@@zsinormotors is there a part number so we can search for it on the internet or our local Honda deallers? I am from Brazil and couldnt found it anywere....

[@bartizq]

@@rodrigocebola8231 Part numbers are: 17251-MGZ-A00 - FUNNEL, L. AIR; 17252-MGZ-A00 - FUNNEL, R. AIR. I got mine from partzilla, they're a bit different compared to the ones in this video.

[@rodrigocebola8231]

@@bartizq Thank You my friend!!!

[@Lukas081508150815]

@@bartizq i looked up, does it fit in the 2020 Model as well??

[@emilthomsen45]

wher did you buy it from ?

[@JeanBaptisteindustrieOfficiel]

Hello , can you give me the link for Buy it . Thanks

[@MrCameronpalmer]

IM VERY INTERESTED TO BUY THESE FOR MY HONDA CB500 2013 WHERE DO I BUY THEM FROM

[@bartizq]

I got mine from partzilla, 17252-MGZ-A00 - FUNNEL, R. AIR, 17251-MGZ-A00 - FUNNEL, L. AIR.

[@clinster78]

If you got the uk model cbr500r it’s all ready fully open just checked mine now

[@zoom4340]

Are they them plastic intakes then ?

[@carlosgooglemaps94]

It’s a CB500F, not CBR500R, don’t you know the difference??

[@sjv6598]

@@carlosgooglemaps94 it’s the same engine.

[@YTUA1983]

@@sjv6598 Exactly, it's just different models with the same engine!

[@YTUA1983]

Yeah but only after a certain year (newer models)

[@hixon1986]

Hi, I have just contacted the maker of these, who advised he doesn't make them any more as they are no longer restricted. So for my 2916 model would make no difference. Suppose I will have to take a closer look. Either way, I can't buy them.

[@bartizq]

Is your honda for US market?

[@MotoAventuras125]

2016 model need REMAP the ECU for obtain the 7.5 extra hp making this upgrade.

[@hex_surfer4588]

2017 and 2018 (PN 38770-MJW- DZ1 and DK1) ECUs needs a remap, throttle opening limiter removal, A00 snorkel and quick throttle grip for complete derestriction. The gain is 5HP but some tweaks with ignition and intake snorkel could increase it bit more.

[@rodri6067]

@@hex_surfer4588 Hi, it's worth it just deleting snorkel and installing this items?? Because in Spain is very restricted remapping anything. For a 2017 cbr500r, Thx!

[@hex_surfer4588]

Jeje, casi mejor en castellano. Pues si - vale la pena. Lo unico - esas toberas solo las tienen motos hasta 2016 (y algunas motos de 2016 tienen tambien limitacion en mariposa de gases y ECU). En Honda han ido cambiando la manera de restringir la potencia segun el año de fabricacion. Y TODAS las versiones tienen mapas diferentes de las versiones deslimitadas. Lo se porque tengo analizados los mapas de distintos años y descompilado su codigo maquina. Si tienes una cbr500 del 2017 lo suyo es la repro (absolutamente necesario), quitar limitador de mariposas y poner snorkel modificado (si lo quitas sin mas pierdes potencia). Y pasate por el clubcb500x - hay unos cuantos posts mios sobre repros y deslimitacion 😉 P.D. Y poner puño rapido - que si no la muñeca no da para abrir el gas a fondo.

[@achilleasskkiller2814]

Very helpful video! Do you know how to search for them online?

[@YTUA1983]

He won't tell us for some reason!

[@spedsex1]

onde comprar

[@brobro3546]

Hi link for buy ?

[@rainerhasler135]

This video amazed me and made me think that my 2019 Honda CB500X may have the same intake which will reduce the power of the motor a lot. So I took out the air filter and tried to get out the intake. But impossible! What I saw then was that the intake is fully open and straight. So I know now that the aluminum intake shown on your video wouldn't help anything to increase the power of the motor. Behind all this is a European law which limits the power of motorbikes for newbies to 35 kWh. So many big bike producers had to offer a limited version of the normal bikes in order to fit to this driver license class A. In Asia (I assume) the big bikes always come without power reduction as made in the factory. I am living in Thailand...

[@hex_surfer4588]

2019 CB is restricted by other means

[@piotrrekowski6329]

@@hex_surfer4588 w jaki masz jakieś informacje

[@hex_surfer4588]

@@piotrrekowski6329 They has throttle opening limiter on european versions from 2017.

[@djo2435]

Hello, how much hp do you have in Thaïland ?

[@YTUA1983]

Yeah that's because the newer models have already been fully opened up!

[@paulobarus3385]

link to buy ? US

[@Uts9000]

why not just remove the restriction from the air horn?

[@lacanw.9906]

+1 Good question

[@josephtech6907]

SEGUO .....MI INTERESSA

[@alemaolocao]

Sucesso!!!!

[@salvatoreiannone4130]

Hi, what have you achieved in terms of performance?

[@WyreForestBiker]

Nothing !

[@mito4mm970]

In Brazil 3/4hp dinamometer

[@spedsex1]

considerar

[@spedsex1]

o

[@nuestraslocuras545]

Hola me puedes decir si podría hacerlo ala 2017 ???

[@hex_surfer4588]

No, tienes que quitar el limitador apertura mariposas y reprogramar.