Removing stock exhaust from #Honda #CB650R and replacing with a full system #Akropovic Racing #S-H6R11-AFT exhaust. Installation method and exhaust sounds.
Пікірлер: 33
@BananaMobileGaming2 жыл бұрын
I'm literally about to buy this for my 2021 Cb650r. I hope everything goes smooth when I install it 😂
@TheF1mo2 жыл бұрын
Rather simple to do with the tools outlined in the video. Just installing the header pipes is the challenging part. Fiddly that’s all.
@neoretroguy44882 жыл бұрын
bro payo ko pa install mo nalang sa honda dealership kung san nakuha mo yung CB hehe
@andyfowler227119 күн бұрын
Even tho mine is a lambs bike would it sound has good I’ve if it’s not derestricted
@TheF1mo14 күн бұрын
The upgrade definitely sounds great
@Inghaman24 күн бұрын
Buys £1400 Akra, attacks it with a Dremel. Lol.
@TheF1mo14 күн бұрын
no mate, not spent £1400, but none the less, to remove the weld tack, it had to done. Not what I would like, but had to be done.
@paul-ku5 ай бұрын
great detailed vid
@TheF1mo5 ай бұрын
Appreciate it. Thank you.
@haze48286 ай бұрын
You can remove that tack-weld with just your arm strength if you have a good quality hex tool - Also it's super easy to remove the baffle if you spray some WD40 in around there and leave it for 5 mins, then use that spring puller to latch on to the lip. Came out super easy for me!
@TheF1mo6 ай бұрын
Trust me it's not. I would not have gone through all that trouble if were as easy. Tried the hex wrench, I am not short on tools. it's risking completely damaging the head with a hex wrench or grind the weld. as the welding is not a machine process, some may be a simple tack, others such as this one had the weld over the baffle.
@haze48286 ай бұрын
@@TheF1mo Guess I just got lucky with my particular exhaust then?
@shadowboybass2 жыл бұрын
what is the Nm for the nuts at the exaust ?
@adamsedlar99082 жыл бұрын
Hey, just wanted to ask what year is that? Is it the euro 4 or 5?
@mohammedislam89922 жыл бұрын
2019
@ΠαντελήςΤσάλλης4 жыл бұрын
With db killer is street legal? It has catalytic or not ?
@mohammedislam89923 жыл бұрын
With DB killer will be street legal. No CAT inside. I rode without DB killer it’s fine.
@eddiewu23363 жыл бұрын
what are the three tubes hanging off the bike near the kickstand and below the shifter at 1:25?
@TheF1mo3 жыл бұрын
Overflow and expansion
@eddiewu23363 жыл бұрын
@@TheF1mo Were they always like that to begin with or were they disconnected from somewhere during the process of installing the exhaust?
@TheF1mo3 жыл бұрын
Yes this is the position of the pipes as standard.
@Chyurri3 жыл бұрын
what is your camera and mic setup?
@mohammedislam89923 жыл бұрын
Nothing special. Just GoPro. I think version 4
@tronnald45913 жыл бұрын
Hi! Tell me please - need to configure the engine? Or just install the exhaust system and enjoy it? Thanks!
@TheF1mo3 жыл бұрын
No need for remapping
@tronnald45913 жыл бұрын
@@TheF1mo Thanks for the answer! Is the engine as stable as the stock exhaust system in all rev ranges?
@TheF1mo3 жыл бұрын
Yep. It’s smooth no random Rev jumps or idle. Power is very little increase. Sounds obviously louder but not excessive. It’s a good upgrade to get.
@tronnald45913 жыл бұрын
@@TheF1mo Thank you so much bro!
@tronnald45913 жыл бұрын
@@TheF1mo kzbin.info/www/bejne/jqmufaGuh9yspcU Hi bro! Exhaust installed :) Thanks for the tip!