How To Install OEM Heated Grips On A 2019 Honda CB650R

[@charliefeneaux8996]

A wonderful video. Really nice to see a very competent mechanic at work. So many of these vids show people clanging tools on painted surfaces, using excessive force and the wrong tools. Also no annoying voiceover stating the obvious -- the captions said just enough. Good pace too, and excellent clarity. The level of dis-assembly was very interesting. At one point I was beginning to wonder if the engine was coming out too! And then I was wondering if I'd clicked on some other video by mistake. Anyway, all logical in the end. Honda evidently not making it too easy to retro-fit gadgets to their bikes, even OEM! One thing on the electrical tape -- I would've used heatshrink material. Also, the tape which someone else has mentioned that consolidates into an unwrappable binding is good for waterproofing. First time I've seen this channel and interested to see that you've moved up to a CB1000R. I've got one too. Will look out for more from you. Thanks for your excellent work.

[@3ftDeepChannel]

Hey, thanks for the kind words. I totally agree with you about the heat shrink tubing. I followed the instructions that came from Honda verbatim, and was very disappointed in the look of the tape when it was done. I have no idea why they didn't just include a bit of the heat shrink in the kit, considering how much we pay for the grips! The CB1000R is my pride and joy. Every time I see it I marvel at its beauty. I realize beauty is in the eye of the beholder, but my eyes are tuned perfectly to that machine. It's also fantastic to ride. Safe riding!

[@paulyflyer8154]

I thought I'd clicked on the wrong video for a minute and you were showing us how to replace the gearbox and fuel pump.

[@3ftDeepChannel]

Ha ha! Well, like it or not those are the OEM instructions, to the letter …

[@chriswalsh2351]

Top vid. Just finished installing my OEM grips and this was a huge help. I did manage to keep the right hand shroud and tank on for installation though. Propped the tank up with a bit of wood. Keep up the good work 👍

[@3ftDeepChannel]

Good stuff, Chris! We realize there are short cuts to get things done, but we do it by the book for various reasons and let people figure out better ways of getting the job done. Safe riding.

[@dsofe4879]

Step 1: take entire bike apart Step 2: put back together, but with heated grips

[@3ftDeepChannel]

You forgot one step: Bang your head against the wall trying to get things back together!

[@sephirx11]

Thanks for the tutorial and THANKS for the guide of how to use them. I was told by my dealer the contrary information about the heat levels and I was going crazy thinking why I always burned my hands if "it was in the lowest level". Thanks to your video I now understand it was the maximum level all the time hahahaha

[@3ftDeepChannel]

Glad we could help out! Safe riding!

[@Rakatawhat]

Awesome vid, about to do this on my bike. A question, is it required to apply grease between the handlebar and the throttle grip?

[@3ftDeepChannel]

No grease. That’ll cause it to slip off. Some instructions say to use thin glue, others say to use alcohol which will evaporate and leave the grip tight on the bars. Follow your instructions carefully but if you use glue, use it sparingly as it sets up quickly and often fouls the process. Good luck.

[@MajorHazzard]

Man that is a lot of work.If its was my bike I would just use Oxford heated grips a lot easier to install and I bet a fraction of the cost of buying the OEM ones.Granted,the Oxford controller isn't visually pleasing, perched on the handlebars, but I can live with that.

[@3ftDeepChannel]

Very good point, Major. I’ve had Oxford heated grips before and they were great. The controller is a bit ugly though (in my opinion), so I only found it appropriate for my ugly bike: my 2008 Kawasaki KLR650!

[@mohdfarid6058]

Lucky i dont need to install this since I live in Malaysia, its always summer here😄🖐

[@dsmpampis]

I have a question. I am about to buy the new Forza 2025 and I’m thinking to add the heated grips. Are they’ll be installed from the factory or the Honda dealership is gone to install them after they receive the bike ? Thanks in advance.

[@3ftDeepChannel]

In my part of the world the dealership always installs accessories after they receive the vehicle. They usually charge labor to install them, too. If you can, try to negotiate the labor to install your accessory/ies. Good luck and safe riding!

[@Mallikii27]

Just a tip, instead of electrical tape, on motorcycles, I prefer that self sealing tape that fuses itself together. I’ve picked it up at NAPA but I’m sure others have it. It installs nicely and looks very professional. I’ve never seen it degrade like electrical tape. After some time like days or weeks it can’t be unraveled so it needs to be cut off.

[@3ftDeepChannel]

Good tip! Personally, I was very unhappy with the finished look of the electrical tape, but always try to do these procedures by the manual. Thanks for your comment.

[@dnob6668]

When you turn on the power switch does the green light keep flashing once you select the heat level you want? I just installed a pair and the light flashes constantly. Thanks for the video and your time.

[@3ftDeepChannel]

Mine does not flash constantly. It sounds like there may be an issue. Do they heat up?

[@dnob6668]

@@3ftDeepChannel yes they heat up.

[@3ftDeepChannel]

There should be a different number of blanks for each heat setting. See if you can get hot medium and cool settings. Also, try disconnecting the battery for a few minutes and then reconnecting. Good luck.

[@vitvrbik4346]

Great video & well done, but all that to install heated grips!

[@3ftDeepChannel]

Unfortunately, yes. The fuss is all about getting the wires tucked away to minimize exposure and maximize esthetic appeal.

[@mrbookends]

Very well made, well edited video - thanks! I'm in a different sort of pickle: the US 2022 CB1000R Black Edition I just bought didn't have a factory heated grip option. I assume it's harnessed for one and controllable through the new TFT dash though, as it's a Honda accessory in the UK and I've seen videos of people using it. I'm contemplating ordering the heated grips from a UK dealer and having them shipped stateside and using this video as a general install guide!

[@3ftDeepChannel]

I also installed the heated grips on my 2019 Honda CB1000R. It was a very similar process as the CB650R, but as the cyanoacrylate glue tends to firm up way too quickly (i.e. it created big issues), I didn’t even use any glue and it’s stayed put for over 2 years. Good luck!

[@TheNetBeast]

Hi, great video, I have cbr 600fa 2011, grips and heating button on left looks same like yours, i broke my lever suport holder, tight it to much and cracked, so i bought a new one, now I have to slide my heated grip off (clutch side) and put it back , do u think i can do it ?

[@3ftDeepChannel]

Possibly, but very very carefully. Two things could help you: 1) trying to get lots of isopropyl alcohol between the grip and handlebar, and 2) getting compressed air in between the grip and handlebar. The heating elements are very delicate and are placed close to the inside of the grips, so just don’t use brute force or you will tear them for sure and they will be unusable. Good luck!

[@TheNetBeast]

@@3ftDeepChannel forgot to answer back, i managed to do it nice and safely, I turned on the heated handle and i used a spray then slide out easy, thanks !

[@3ftDeepChannel]

Great to hear. Thanks for the update.

[@enzo2087]

@@TheNetBeast what kind of spray did you use?

[@enzo2087]

Can you remove the grips without damaging the heating if wanting to change the stearing bar?

[@3ftDeepChannel]

You can remove the throttle one, but it’s very difficult to get the left hand grip off without destroying it. If it’s an older heated grip, however, and the glue is crusty it might be possible to remove without destroying it. Good luck!

[@wakajawaka44]

Excellent video tutorial! Thank you for taking the time, great camera work and superb definition from the Canon 70D. Do you like your Honda CB 650R? Some owners mention jerky throttle at low speeds and vibration through the handlebars at 5000rpm approx.

[@3ftDeepChannel]

Thanks for the kind words, Waka! Yes, I loved my CB650R (I since sold it and bought the CB1000R). I'd agree that there is vibration at around 5,000 RPM, but the same thing goes for my CB1000R (actually it starts around 4,000 RPM on the CB1000R). I wouldn't say it has a jerky throttle, though. I didn't feel that the first two gears were very "functional" on the CB650R. It felt like the only purpose of the first two gears was to get you into third gear so you could start riding. The CB1000R is geared much, much better. Lots of power on the CB650R, though. Take care.

[@owenwalter8698]

instablaster...

[@bradb2514]

Excellent DIY! Thanks.

[@enzo2087]

Can you remove the heated grip safely if you want to change the handlebar?

[@3ftDeepChannel]

Good question. If you follow the manufacturer's instructions and glue them on then "no", they will likely be destroyed in the removal process. I have found, however, that they go on so tight and the glue sometimes confounds proper installation so I didn't use glue the last time I put on a set and it worked great. That set I'll be able to replace, if I want to.

[@googlenutzer8768]

I have a Honda CBR650 R (not the naked version) - do you think the installation would be possible without removing the tank, headlights and handlebar? I'm scared of removing these parts.

[@3ftDeepChannel]

I'm not sure what the assembly instructions are for your bike, but don't be afraid of removing parts. Just make sure you have the right torques and tools. When you take your bike apart (even if you don't like to), you learn a lot about it, which can come in very handy when there's a problem. In other words, it forces you to get to know your bike. Who knows, you may find something that's coming apart, rusting or broken. So, get in there and have some fun learning about your bike!

[@googlenutzer8768]

@@3ftDeepChannel Ok, I ordered the parts... let's see how this turns out. :D What grease can you recommend?

[@3ftDeepChannel]

No grease required for any of the parts. When you put the handle grips on, make sure you spray some isopropyl alcohol on so it slides more easily on. Use very, very little glue, as it sets up very quickly and may set up on you while you’re trying to slide it on. The last time I did the job, I actually didn’t apply any glue at all. Good luck!

[@googlenutzer8768]

@@3ftDeepChannel Ok, I now have heated grips on my CBR650R! I managed to install it without removing any bodyparts or the handlebar and without removing the tank completely. Nect job will be the quickshifter! Thanks for your videos!

[@3ftDeepChannel]

Great job! You should’ve filmed it and shown us how you did it! If you find shortcuts with the quickshifter installation, be sure to film them. Good luck! And thanks for your comments.

[@danfn2r72]

The plug that you connected the sub harness too on the left of the fuel tank, is that the power for the controller? I've got myself some heated grips and was wondering if I can get a plug will I be able to get switched power from there. Cheers.

[@3ftDeepChannel]

Hey Dan, I don't have the bike anymore, but I believe that connector has power. I can't check the voltage, resistance etc. so unfortunately I can't help out here. I found with my heated seat installation (that is also computer controlled) on my Triumph, the resistance had to be very close to the OEM heated seat plug or it wouldn't work. Good luck.

[@danfn2r72]

@@3ftDeepChannel no worries, I appreciate you fast response!

[@alhit007]

Another great video👍 are you managing to get out on the water at all?

[@3ftDeepChannel]

Not nearly as often as we'd like! Up to the lake soon for 2 weeks, so we'll get lots of riding in then. Thanks for your comment.

[@iamtheiceman]

Great video. I don't think I'd have the patience to do so much work just for the sake of wonderful heated grips, though. Hope you are enjoying yours ! (I will just buy better gloves) :-)

[@3ftDeepChannel]

They are not mutually exclusive. You need both heated gloves, and heated grips. Then you’re in heaven!

[@ZevoaF]

Do you know if this will work on the cb125r thanks?

[@3ftDeepChannel]

It might have a few differences, as it is a different model. I suggest downloading their instructions for that accessory on that model, and comparing the steps to what we’ve shown. Good luck.

[@wojtek2194]

hi dude, are the sub harness grip connectors present in the main harness wires ?

[@3ftDeepChannel]

Sorry, I don’t have the bike anymore but I can say that all CB650Rs are exactly the same as in our video.

[@josephg7779]

Hi mate, i got these grips on my cb650r, i had a crash and the handlebars are bent. Is there a safe way to remove the grips without wasting them, to put on the new handlebars? as you know they're pretty expensive so would hate to waste them.

[@3ftDeepChannel]

Sorry to hear about your crash; I hope you and your baby are OK! If I were you, I would use a combination of compressed air and a very flat, thin object and insert it under the grip to carefully work it off. Also, constantly squirt some alcohol between the grip and the handle bar. Be very patient and go slow! Good luck.

[@josephg7779]

@@3ftDeepChannel Thank you so much for your kind words, i am completely fine, she's not too bad either, one of the shroud covers got some scratches and the throttle cables needed changing but the crash bobbins took most of the damage, one footpeg needs changing too. Working my way to her former glory tho! Thanks for the info, i will surely follow your steps! Will let you know if it works mate :)

[@UniqueApex]

Hey brother, thanks so much for the upload! Quick question: Are your handlebars 7/8" or 1" ?

[@3ftDeepChannel]

Sorry, I don't know. Since I made the video I sold it and bought a 2019 Honda CB1000R so I can't go out and measure it.

[@ScaredTrout2nd]

They are 7/8 buddy!

[@3ftDeepChannel]

Thanks, Mr. Trout!

[@ScaredTrout2nd]

3ftDeep I gotchu man 😂

[@UniqueApex]

@@ScaredTrout2nd Thanks brotha!

[@robp1041]

Do you get a heated grips icon on your dash ?

[@3ftDeepChannel]

Sorry, I don’t have the bike anymore to confirm, but I believe you have to rely on the light on the grip itself.

[@robp1041]

@@3ftDeepChannel No problem, thanks for the reply

[@lassegunneng4294]

Nothing shows on the dash, just on the switch for the grip. 3 levels of heat indicated by number of flashes when turning on the heat. Starts at the highest level, and that will roast your hands in thin gloves ....

[@robp1041]

@@lassegunneng4294 Yeah cool thanks. I installed the same grips on my CB1000R all work fine, but no dash icon as iv seen on other bikes.

[@3ftDeepChannel]

I believe there should be an icon on your CB1000R. What year model do you have? Also, are you using the OEM heated grips?

[@toofastnobrakes]

How well did they work?

[@3ftDeepChannel]

Beautifully! My only caution to you is to be careful about using the grip glue, as it hardens while you’re trying to slide it on. Good luck.

[@tonebonetones]

What a faff and fandangle. These are OEM heated grips, too? Honda win the the 'most hard to fit OEM heated grips' award.

[@3ftDeepChannel]

We were looking for the right words to describe it. ‘Faff and fandangle' ...that’s it!

[@Necromantix]

how long did the installation take?

[@3ftDeepChannel]

We’ll, if you don’t have to film each step in excruciating detail, you should give yourself about an hour and a half. Good luck.

[@올레-g8z]

Thank you very much for your kind explanation. Please give me good information next time.

[@3ftDeepChannel]

What do you consider “good information”?

[@kamentodorov621]

Which year is your bike ?

[@3ftDeepChannel]

2019

[@sunilsamanta1749]

@@3ftDeepChannel Is it possible in 2022 model

[@3ftDeepChannel]

I’m sure it is. Check with your dealer to make sure you order the right part for your bike, though.

[@scottmcleod9886]

I could buy another bike for the price of these and fitting.

[@3ftDeepChannel]

Yes, but we’ll bet it won’t come with heated grips!

[@varun1036]

Very Professional 👌

[@3ftDeepChannel]

Thanks, Varun!

[@Darkstep9150]

The cable on the left gets in the way of my thumb..

[@3ftDeepChannel]

You're joking, right?

[@Darkstep9150]

@@3ftDeepChannel No, the power cable from the left grip gets in the way of my thumb. Also when I use my signal lights my thumb often gets caught on that cable..

[@3ftDeepChannel]

Interesting. I haven’t heard of that problem before.

[@KrisS8528]

Looks very good, but I’m paying a professional to do this.

[@3ftDeepChannel]

Ah, playing it safe.

[@jonathonpowell2952]

I wish I could remove mine I hate them very hard and slippery in the wet

[@3ftDeepChannel]

They’re not that hard to remove. If you don’t like your set, there are lots of options out there for replacements.

[@jonathonpowell2952]

@@3ftDeepChannel they look like alot of work to get off mine don’t work either the light is on but don’t heat up

[@3ftDeepChannel]

Was there any damage to them why they were being installed? Did you install them, or did the dealer do it? I assume they are the OEM grips.

[@jonathonpowell2952]

@@3ftDeepChannel they were on there when I bought the bike privately they was installed by the dealer the light was on there when I bought it but when i went to use them they just didn’t heat up

[@MissMan666]

@@jonathonpowell2952 is the the original heated grips ? are they slippery you say ??

[@expatbiker6598]

Within the first 5 min. I gave up. I guess I will have 2 pay someone to do this. 🤦🏾‍♂️

[@3ftDeepChannel]

They’ll charge you at least 100 bucks. Don’t give up!

[@fredrit323]

I think I'll buy a better pair of gloves...

[@3ftDeepChannel]

But they really are fantastic. Even with a great set of winter gloves.

[@billlaughlin8153]

Wow I’m with the other guy, buy heated gloves. Me ,, I’d lose stuff taking all that apart and probably forget how to put it back together. So yeah heated gloves for sure

[@3ftDeepChannel]

Heated gloves and heated grips is a combination made in heaven. Add heated seats and you are in heaven …

[@paulyflyer8154]

God me too. Seems ridiculous you have to virtually dismantle the whole bike. What could possibly go wrong!?

[@diegocg1513]

👎