Honda CBR 600rr / 1000rr Integrated Tail Light Wiring (JOATD)

[@ardaozcan9303]

You might have just saved me a whole lot of headache man ! Thank you

[@JOATD]

You're welcome I'm glad that my video could help you

[@LennyNaicker-b5n]

Such a great video. Simple but detailed. Best video on KZbin for this DIY. Thank you bro. 🙏

[@JOATD]

@@LennyNaicker-b5n no problem I'm glad that my video could help you

[@95turboteggy65]

I want to thank you for this video. It really helped me out. I picked up a 09 cbr and none of the turn signal light or brake light were wired correctly. You should of seen what they tried to do lol. Now everything works perfect.

[@JOATD]

No problem I'm glad that my video could help you if you don't mind telling me what you type in to find my video I would like to change the name of it so other people can find it also.

[@95turboteggy65]

​@@JOATD I just typed in (2009 CBR 600rr tail light wiring) only difference was your 2 yellow wires were orange for me on my tail light. Thanks again.

[@JOATD]

@@95turboteggy65 No problem thanks for answering that question for me.

[@justaguy4real]

2:20 but what are each color wire for? like explained at 3:40 Haa but 4:40 was the exact reason I was looking for. thx buddy good job

[@JOATD]

No problem, I'm glad my video could help you

[@mads4345]

I have either constant break light or constant running(no break light) 😢

[@bc-mr1si]

Jack of all trades.have a question. you have led the ground from each indicator to the ground connection at the light.which is fine. why have you then connected it to the connector with the ground ,brake and light .🤔 . is there a need to do this as the tail light is already getting a ground from the indicators.

[@JOATD]

No you don't have to hook all of the grounds together I just chose to do it that way.

[@bc-mr1si]

@JOATD ok fella thanks

[@julianhuertas8909]

Great video, i have a 04 cbr 600, havent had a brake light since 2014 😁

[@JOATD]

Lol, I know how you feel. I hope you get everything connected I'm glad that my video could help you.

[@etherportel823]

Nice video bro but what about the resistors?

[@JOATD]

I have a video where I installed a flasher relay. I didn't have to install resistors. The flasher relay fix that problem. kzbin.info/www/bejne/pqDUemCdd9OoapYsi=05j_pPrkMU1CQ7ZW

[@kelseychinevere]

Do you need a relay ?

[@NefariousMinded]

Bro thank you so much for the is video. It helped me understand more of what’s going on back there. I did all the steps you did and the taillight glows but o ain’t getting my turn signals to work. What should I look into next? The signal relay looks fried but my switch also feels stiff af. Should I just replace both?

[@JOATD]

Sorry so late for some reason it blocked your comment and I just noticed it did you get your problem fixed

[@lastinline8207]

😊Q❤😊

[@gawddangthatsmoist2251]

Thanks for the great video!

[@brianchristenson6055]

Very good thank you sir!)

[@JOATD]

No problem, I'm glad that my video could help you.

[@440hp5]

I dont see a black connector on my 08. Is that exclusive to older cbr?

[@JOATD]

I don't know the difference in the wiring between a 08 and a 06. but I do have wiring diagrams two different years in my descriptions area.

[@erickposada1997]

Thank you master, this helped a lot when I installed the integranted stop light for my honda CBR650F, cabling distribution is the same

[@JOATD]

No problem I'm glad that my video could help