How to install Non-Integrated Tail light on a 07-12 Honda CBR600RR by TST Industries

[@4krider20]

Great Video. TST Industries does a fantastic job with after market parts - they are real pros. Bart is not only a great installer he is also a fantastic rider. I have purchased the complete rear end kit for the 2021 Yamaha R3 and every part was top notch and spot on - everything lined up perfect and all I had to do was to follow Bart's install videos. I'm a big fan of Bart and TST Industries. This is the first place I come looking for mods for my bikes. I love there integrated tail light offerings.

[@ArabianRider]

is there no way to fit these without cutting the tail? also, would the brake lights still work fine without plugging the indicators? I feel better keeping the signals outside of the tail light.

[@TSTindustries]

Unfortunately our tail light will require the cutting of the subtray during installation. You can use our tail light without the signals by simply leaving them unplugged or you can take a look at our non-integrated in-tail tail light which can be found at the link below. Same style, fit, and function but without the signals built-in. tstindustries.com/TST-LED-Non-Integrated-Tail-Light-Honda-CBR600RR-2007-2012.html

[@tarikelmakaoui9605]

Nice work. I would like to order this parts but I will need the plate light, it's required from my province for inspection.

[@TSTindustries]

We do offer a license plate light that works with our systems well. Yje videos we make focus on the installation of the part that the video is about. The license plate light has its own separate video

[@Longboardmaestro]

Hi there,I would like to order this taillight but it seems that you guys don't ship to singapore. Is there a way to get this from you guys ? Would really appreciate if i could get my hands on this. Thank you !

[@wuhkong]

Isnt bad if you dont reuse the heat shield?

[@kokinoritake3459]

Question Are the wires in any risk of melting or otherwise deforming in the long run as the heat shield is eliminated?

[@TSTindustries]

Not at all.

[@louiesmithen7697]

Hes lying

[@mikeyeyes7]

@TSTindustries Can u reuse the Oem Turn Signals with your Brackets? I would like to reuse stock turn signals since they stick out to the sides a little more

[@TSTindustries]

+mikeyeyes7 OEM signals have a vastly different mounting mechanism and cannot be mounted on our Pod Signal Mounting Kit.

[@sosyalant]

Would be nice if there were brackets to install these below the seat. really hate when signals stick out of bike's body

[@TSTindustries]

Have you seen our Integrated Tail light? You can check out our install video below and see if that product will solve your issue. kzbin.info/www/bejne/o3K7gaiki8SIrrc

[@sosyalant]

I did. Cops are picky in Northern Virginia and I don't want them to draw unnecessary attention. I was thinking of putting the plate( w/ minimum bend) and signals under the seat, away from the rear end of the bike.

[@TSTindustries]

If you are going to put the signals under the tail then you are probably just as likely to get cops' attention as with an integrated taillight. Best we can do for you at the moment is this tstindustries.com/TST-LED-Rear-Signal-Kit-Honda-03-16-CBR600RR-04-07-CBR1000RR.html

[@tizzzue]

Is it possible to install integrated tailights WITH the pod signals?

[@TSTindustries]

Yes but that is not a plug and play configuration so you will have to wire taillight signal positive in parallel with pod signal positive.

[@elliotfernandez3213]

Nice signals, do these fit a 2013 ?

[@TSTindustries]

These will in fact fit the 2013: tstindustries.com/TST-LED-Rear-Signal-Kit-Honda-03-16-CBR600RR-04-07-CBR1000RR.html

[@roivandaimn963]

Hi, do anyone knows if these accesories are legal in europe????

[@TSTindustries]

DOT laws vary from location to location. It is up to you to verify the legality of any aftermarket part in your state before making your purchase.

[@Rizzleuniverse22]

I need one of these for my bike.

[@TSTindustries]

Rizzle Universe What's on there now?

[@Rizzleuniverse22]

I have the Hyperflo Taillight now.

[@TSTindustries]

Well, we have plenty in stock anytime you are ready

[@joezeigler3431]

Looks like a good product but has a few flaws. First one is removal of the heat shield. Don't plan on storing any thing in the trunk compartment. It will more than likely melt on a longer ride and don't plan on having a passenger on the bike. They will get really hot unless you put something there to deflect the heat. Second the tag mount. Definitely figure out something else unless you like getting harassed by the cops every time you ride because it will happen. That is not a proper mount and there is no light for the tag. You will get pulled over because they can't read your tag. Third don't use electrical tape like he shows. Do it right the first time and use heat shrink

[@TSTindustries]

The only thing that will melt in the trunk is chocolate.

[@louiesmithen7697]

That license plate mount is just awful, man. You guys fudged that, I wish it came down more square under the indicators

[@TSTindustries]

Everyone's entitled to their own opinion and we respect it. This is probably our second most sold fender eliminator of all-time.