Honda CRF 50 - 88cc Big Bore Kit Install - Part 2 of 4

[@Sms68]

Great Job. Also, were the handle bars welded when you got this. I just picked a crf 50 for my son used and the Bars are welded. I want to switch them out. Could you recommend bars, etc. Thanks. Looks great

[@HTMR]

The bars were not welded on. Check out fast50s.

[@samjacobs4769]

Im trying to redo the rings on my crf 70 because it burns oil and blows out blue smoke. What do I need to order and where from? Thanks

[@mayhembike]

So do you have to drain the oil and remove the timing chain tensioner from the underside to so the BBK? Some say yes and some no?

[@jamespolucha6911]

Great video, how did you learn so much on these motors?

[@HTMR]

You have to just go for it.

[@FoursquareT]

I have a question my son has mastered the 50's power and is too small for a larger bike. Is the 88 kit worth the money's or should I do the 72 cc cheater kit. I am looking for more power out of the turns at the mx track.

[@HTMR]

How old is your son? I'd go 88cc kit and you can always limit the throttle?

[@FoursquareT]

MatthewMCRepair thank you for the reply! He is a small 6 year at 50lbs the kx65 is too tall as well as the crf70. The 50 is at perfect height to where he can have both feet on the ground.

[@SamsMotorcycles]

Hey i got a question, on my honda s65 inside the left cover where the flywheel ,magneto is there is a wire thats stripped and sticking out and doesnt connect to anything, do you know where it might go? Thanks for the help Sammy

[@HTMR]

They save so much time :)

[@colinbowes2672]

hello I hope some one can help me I just bought an 88cc kit for my fifty ... which includes piston, cylinder, 108 stroker crank, and I also bought a high volume oil pump... all of my friend been telling me to get a race head but I already went over my budget.... would this work on the stock head ... or should I buy a cam and new valves .... thanks

[@HTMR]

+colin “colinridesbikes101” bowes I would agree with your friend. That engine is going to breathe well through the stock head with a big bore and stroker.

[@colinbowes2672]

+MatthewMCRepair do u mean not going to breathe well if I can't stop now. do you happen to know a place or website that I can buy just the cylinder head because every place I look has it with the piston. and I bought the piston already thank you

[@colinbowes2672]

+MatthewMCRepair also should I get a performance carb?

[@HTMR]

+colin “colinridesbikes101” bowes Not sure where you can buy head only. My point was all your mods won't compliment each other w/o a better flowing head.

[@HTMR]

+colin “colinridesbikes101” bowes Yes.

[@HTMR]

Please go to my site and email through the contact page. Include the year of your MC.

[@jamespolucha6911]

What front forks are you running

[@HTMR]

I don't know sorry.

[@150ftrek]

You have all the nice tools haha

[@HTMR]

damn fender.

[@HTMR]

Sam, email me a pic.

[@huddyk6]

who rides the bike

[@azwanboyzw9991]

Haiawow just book soom