Honda CRF450R Linkage Bearing Replacement | Honda CRF450-R Rebuild Part 8 | Partzilla.com

CRF450 shock linkage kit: www.partzilla....
See a shock linkage rebuild on a CRF450R in this video from Partzilla.com. This is part of a larger rebuild project where we're rebuilding this dirt bike from the ground up. See more of the rebuild here: • Honda CRF 450R Repairs
A dirt bike shock linkage rebuild was definitely in order for this bike. There was a lot of play in the shock, and once we removed the linkage from the machine we saw that the bearings in some spots had pretty much seized up.
In this video, we’ll get the shock and the linkage removed, and then we’ll attack the bearings. Because of the way the bearings are pressed in, a Motion Pro suspension bearing tool set is nearly a must for this job. See how it works in the video and get yours here: www.partzilla....
We’ll remove the old shock linkage bearings on the CRF450, clean the linkage up a bit, and get the new bearings installed to complete the linkage bearing replacement.
Read how to do this job step by step: www.partzilla....
Watch us remove the engine on our Honda CFR450 here: • Honda CRF450 Engine Re...
See the CRF450 engine teardown here: • Honda CRF450 Engine Te...
VIDEO HIGHLIGHTS:
Removing the shock - 1:15
Removing the linkage - 2:10
Removing the old linkage bearings - 3:00
Pressing in new bearings - 6:45
Shop for OEM Honda motorcycle parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2005 Honda CRF450R, but you may have similar steps for your Honda dirt bike. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
#Honda #HondaMotocross

[@OwlShadow]

15:05 im sure you put it wrong side collars smaller diameter goes outside and dust seal on top

[@alessandrofranceschetti5155]

Whats the game of the kit remove

[@josemanuelflores8059]

Hola buenas tardes tendrán un vídeo de cómo sacar los rodamientos traseros de la misma moto tengo una crf450 2003 saludos desde chile excelente canal

[@kerm9807]

Top skills John 👌

[@jasoncameron34]

Great video that tool is nice but pretty expensive but better to do the job right and not take a chance in messing up your linkage

[@PartzillaParts]

Very true

[@jasoncameron34]

@@PartzillaParts we need a place where you can rent those kinda tools. Esp for guys like me that really can't afford to pay 180 for a tool to use once

[@wipotnovi9378]

@@jasoncameron34 In Russia we just take dremel with cutter for metal, make a slit and knock this shit out of there, 10 min job, and cheapest Dremel costs like 20$ :)

[@jasoncameron34]

@@wipotnovi9378 your right thats kinda what I ment about expensive theirs always was to do a job cheaper. I just ment if you have the money it would be a nice tool for the toolbox.