Honda Element Center Console - Ford F-150 (04-08)

After hours and hours of looking for an aftermarket center console for my Honda Element - I landed on a very unexpected solution… the Ford F-150! Specifically model year 04-08, with automatic floor/center console shifter. Surprisingly very little modification was required. Watch for details, post any questions below.

[@ReadySetElement]

Bro this is crazy legit!! Now I know which car to look out for at the junk yard to pull this out of. Very clean man it looks OEM 😍

[@kimberlyhager2872]

Ditto

[@frankenstein4567]

I just did this! Took me less than an hour and that included putting my tools away. I used a Dremel Tool to trim off the tabs. Otherwise I followed the video which was reallt easy. Thank you Rich, you just made my (new to me) 2003 Element much more comfortable to drive. Edit: I got my console off e-bay for $200 plus $12 shipping.

[@richmckie5793]

Glad it helped!

[@genso3065]

My neighbor just bought an element and said he will do this. I've been looking for an element for my wife and definitely will do this for her. This is awesome.

[@MG-ok6nu]

I just watched this video...again. I've watched it a number of times over the last year. You really did a great job. One of the best "how to improve your car" videos on KZbin!

[@peachtrees_]

I'm so excited to do this to my E... the console situation is abysmal. I've been lusting for something better for years... Can't wait to do this mod ASAP. Thank you!

[@highpricedkid28]

Thank you for showing this off! Especially appreciate your attention adding the smaller details of what you did and including the exact info model in the case of others wanting to recreate/ know what to look for👌 I've seen others videos going just showing off the end results of alterations junk yard finds.

[@regalt1987]

Pure genius thank you for this video.. just left the junkyard with the exact same center console exact same color will be fabbing this up tonight

[@enriquemunozmartinez709]

What exact model is it, because I've been looking on junkyard websites the 2004-2008 model. The ones that are coming up for that year model look different.

[@regalt1987]

@@enriquemunozmartinez709 snagged mine out of an 06

[@sickmak90]

How much did you pay for it?

[@regalt1987]

@@sickmak90 If i remember $30

[@jacknick429]

Thanks for sharing this video - I had no idea a Ford F-150 center console would work on our Element! Gonna find and order one ASAP !!!

[@richmckie5793]

Good luck, glad to help.

[@Kid617]

They are $300 on ebay junk yard better

[@jerryborjon]

I did this! It’s perfect! I also cut up a cheap grey tote from Goodwill and used the plastic to shape the inside a bit more. That way it doesn’t just look like it’s sticking out to nowhere

[@alexavilez624]

Who else thought the center console door would slam onto his fingers? 😂Awesome video though. I'm looking for a new Element and as soon as I get it, I am doing this!

[@MiguelRodriguez-iz3ic]

Thanks so much for the info bro just went to the junkyard this morning and found one for only $75, can't wait to install it!!

[@john091077]

I just got my console today. I got the factory armrest out and will fab it up tomorrow. Thanks for the great info!

[@rw5096]

Awesome can't wait to see how you fab something for the hole.

[@justinsalluce9176]

I was about to say.....what about the e-brake....it can't be covered.....then I continue seeing the video and can't believe that it fits the ebrake perfectly 🤩

[@metalmeister1976]

THANK YOU!!! Adding one to my E! The E drivers arm rest is a joke, way too low for a arm to rest on. Plus LOVE this extra storage!

[@TheLazyHalfSRanch]

I got a black one from a Harley Davidson edition F150 at the junkyard. Looks good, works great. I haven't anchored it yet, it's wedged snugly in between the seats.

[@wellsworkshop6057]

Wife just got me one of these for my ELE, thank you so much for the idea! Going to install this morning!

[@_Diggler]

Soon, the only Elements people will be able to buy will be our customized ones we’ve let go…

[@ShORTiiqOtGaM3]

Just bought an old ass 03 definitely gone try this. Thank you!!

[@pnw_element9822]

Wow damn awesome I’m looking for one now thanks for sharing this

[@tminusnyc2915]

So dope. Thanks for posting!

[@SuperRey919]

Just did what you suggested and it came out great! Thanks for making the video 👍🏼

[@davidjbrown321]

Nice job AND fit...looks comfortable too

[@richmckie5793]

Thanks! And yes, SO comfortable.

[@sostupidyoutude]

This is great!!

[@evilpeach2]

Now I have an excuse to go to the junkyard lol.

[@prometheus1901]

This is so awesome!! Thanks for the video...I'm doing this for my E today.

[@kalebbarkley5208]

This is perfect! Exactly what I'm looking for, for my Element! I've got a 2006.

[@kalebbarkley5208]

I'm getting ready to order one. I'll keep you posted on how it goes!

[@phuongon8837]

That looks like a cool mod, thanks for sharing!

[@ruiz212]

Awesome. Doing this mod this weekend.

[@IDontKnowIJustDo]

Awesome!

[@shanew3293]

Cool!

[@stephengernenz8217]

This is nice. Def left some room for improvement on making it a cleaner fit. Maybe use that shifter opening for a trash bag holder thing?

[@richmckie5793]

Lots have done that. Some have successfully 3D printed a cup/tray to drop in.

[@stephengernenz8217]

@@richmckie5793 nice! Even better

[@AngelRivera-nm5ri]

Nice

[@rome4urentertainment_1]

Yezzzzzzir.... niiiiiiiiiice

[@boytran8974]

I did everything except using the L bracket. Thanks for sharing now I don't have to worry about bending over for my drinks lol.

[@alexUA1345]

you are a genius sir!

[@pazu8728]

Wow. Looks really good!

[@chrisharold4110]

Big bro that is beautiful good design

[@Mdub_actual]

Awesome, thank you!

[@stansmith4754]

Well done!

[@reytech1786]

True genius 👊

[@vkhiev]

This is awesome thanks for sharing

[@waynewilcox444]

Brilliant idea....thanks

[@h.a.barker412]

👍👍cool!

[@xenospark713]

Very cool!

[@ayeitshanah2151]

Bruhhhh, I’m totally getting one. I gotta figure out a a sliding door for the ebrake with my 3d printer.

[@richmckie5793]

Let me know if you do! 😁👍

[@terryleelane]

Oh Yea…Now you’re talking…Please keep me in mind if you get it done…I’d really like to see it…

[@godivaone3891]

Thanks. I need one for my 03.

[@pattayperformance]

Thanks for posting! Let me get this straight…you put this right OVER the OEM console and used it as a based to screw/secure the Ford Console? Reason why I’m asking is bc my E didn’t come with an OEM console.

[@richmckie5793]

Correct. You can see the oem console through the ebrake access hole at about 1:40. I believe all E’s came with that low console at the very least.

[@NoEmotionTrader77]

genius dude

[@artsteadman2230]

Curious which F150 model that was taken from? I've had an F150, Triton V8, SuperCrew & the center console you show is totally different than mine

[@richmckie5793]

This one was from a F150 FX4... but the key is 04-08 models with the 'floor shifter' which basically means the shifter is in the center console, not the stalk on the steering column. That is what gives you the hold to reach through for the Element e-brake.

[@donavinquinones9152]

Got mine for 35 at a pick in pull looks just like yours

[@richmckie5793]

Nice!

[@AlanDavid]

great idea thanks

[@gregsadams]

Thank You!

[@robertalicea5585]

Looks good bro

[@robertsosnoskie6239]

Hey does this work for the 07-11 model Elements as well?

[@cic-jakevanddalgeemyers.2739]

Wow...

[@akonisensei]

Do you think it get in the way if someone has the hiro’s swivel seats?

[@richmckie5793]

Sorry I’m not sure.

[@SANweaver]

Howdy, very cool. Did you remove all the inner parts that are hard plastic that route the air to the back? And did you remove the seat caps on the bottom insides of the front seats?

[@richmckie5793]

Yes, all the guts came out, only the underside of the arm rest storage remained. I used an oscillating tool to cut off all of the clips where it would attach to the ford.

[@Papane1]

Awesome! Just bought an 03 today. I’m also in Philly. Is there a big presence here? Thanks mate!

[@richmckie5793]

Congrats! I ran into a few enthusiasts, but not many. Good luck with the catalytic converter thieves. 🤦‍♂️

[@Papane1]

@@richmckie5793no way! Did you get yours taken? Where about an are you? I’m in roxborough

[@richmckie5793]

@@Papane1 Yup! They got mine in the same night as 2 other E's in my neighborhood (Italian Market in South Philly). I've since sold it before moving to the west coast.

[@flipperdoo22]

Do you know what size bolts it had so I know what socket to bring to the junkyard? Thanks for the video!

[@richmckie5793]

Sorry I don’t recall.

[@flipperdoo22]

@@richmckie5793 thanks for the video BTW. I used a 14 mm socket I think and T20 to get it out from the junkyard. It looks great!

[@PeterBranco]

Wow! Nice 👍

[@marthas8108]

Hi, this is great. You say it fits in tightly -- do the seats still move up and back easily? Does it affect them in any way? Many thanks -- I'm planning a long camping trip and this would be so helpful!

[@richmckie5793]

It takes a little more push/pull to slide the seats, but they still have full front/back motion.

[@crispa1861]

Thx for sharing this video. My Q is, how hard is it to take out the console from an F150? Any special tools required? I'm assuming a long 1/4 or 3/8 extension. Thx

[@richmckie5793]

Basic screw drivers and small socket set.

[@Silenceplz595]

Would it work with swivel seats

[@ratlazlo5894]

Jusr got my Ford 150 console. Do you have the link for the step by step cutting of the clips and other plastic?

[@richmckie5793]

Join and search for my (Rich McKie) post in the Honda Element Owners Group on FB, posted on July 4th. Many photos as the first comments. (Private group so can’t link it)

[@dbrice71]

Do you have to remove the front panel to install the rear panel? Help.

[@richmckie5793]

I’m not quite sure what you mean by the different “panels”.

[@adambuchanan8460]

Have you or anyone else tried this with a stick version of the Element? Does it leave enough room for your arm when you shift?

[@richmckie5793]

I can’t say from personal experience, but I don’t see why not. I’ve seen one owner post photos on the Honda Element Owners Group on Facebook. Search “f150” there to find it or post the question. facebook.com/groups/hondaelementgroup/?ref=share

[@scottjune3554]

I like it

[@HotRod-wv4vm]

Cool idea. I have an 04 and really dislike the floor console. Did you go to a u-pull it junkyard in PA?

[@richmckie5793]

No, I got lucky and found a local private owner parting his F150.

[@HotRod-wv4vm]

@@richmckie5793 yep you lucked out. I wonder if the center console from the Honda Fit would fit( no pun intended)

[@kennethclemons8696]

Does this effect the sound of the sub?

[@richmckie5793]

Nope! Plenty of space/air around the front of the sub still.

[@julianramirez4060]

Would the one without the shifter on the center console not work? They seem to be the same dimensions

[@john091077]

You wouldn't have access to the e-brake without the one with the shifter hole on the console.

[@jasonreisenfeld1545]

This is awesome! Does this also work on 2009-11 EX models?

[@richmckie5793]

I can’t be 100% sure. I know it works with those with the cooler console, it just sits a little further back. Unless you pull out the Honda console base, or cut out the back bottom of the Ford console so it can slide further forward on top of the cooler console base.

[@jasonreisenfeld1545]

@@richmckie5793 Thanks.

[@StarHunter28]

The front looks like it could use a little better fitting but other than that it looks great

[@richmckie5793]

It sure could, but that’s the angle/fit it has in order to connect to the Ford dash. I’ve thought about cutting the front bottom to round the hard edge a bit, but would still have space between. Which I need either way because of the sub woofer in the dash.

[@kg4gav]

You could get some ABS or Kydex plastic sheets and mould a front cover fairly easily. They have black and grey with a texture that will blend with most automotive finishes.

[@smokeywhorse9262]

Does it still leave enough room to lay out a bed in the back?

[@richmckie5793]

Unless you find yourself sliding the seats all the way forward for your bed, should still fit fine.

[@user-xk9cg8pe7x]

Will Hiro's Hotrods rotating seat mount work with this?

[@richmckie5793]

I have no idea. But if the seat extends over the stock center console while rotating - I'd guess not.

[@anonuser]

Any issues with the seats sliding back and forth?

[@richmckie5793]

Makes it a little harder to slide, but not impossible.

[@prometheus1901]

I installed an F150 center console today, but now the safety belt alert stays on unless both seat belts are fastened. Any suggestions?

[@richmckie5793]

Sorry, no clue there. I didn’t have that issue, not reports from others. Is it possible an electrical sensor line was cut/pinched/unplugged while installing? Probably not if it goes off when you click the belts it , but worth checking.

[@prometheus1901]

I will check those things. When I remove the console, the seatbelt alert works normal. The fit is extremely tight, so maybe there is something to that. I'm going to play around with it again this weekend.

[@scottnewton6684]

@@prometheus1901 did you figure out what was happening with your seat belt alert? I’m curious before I go and buy a center console how it worked out for you. Thanks.

[@regalt1987]

Okay I didn't realize that there are Honda elements that came without armrests how do I solve this problem

[@richmckie5793]

Your install would be even easier. No need to remove the stock E armrest to fit this one.

[@regalt1987]

@@richmckie5793 there is no way for this to fit with the stock armrest I tried multiple times

[@richmckie5793]

@@regalt1987 Yes, as mentioned at 3:28 in the video, you have to remove any arm rests you have. What I meant by my last comment was the install would be easier IF you have no E armrest to remove first. ie, if your E doesn’t have an armrest to begin with.

[@richmckie5793]

@@regalt1987 kzbin.info/www/bejne/i2O0Ypypjr6jhas

[@andrewaparicio9264]

LMAO.....love it!

[@mrrybicki]

Curious if this would work for a 2011 Element LX?

[@richmckie5793]

I’m not sure

[@greo909]

Come to San Francisco for e brake fun.

[@richmckie5793]

😆👍

[@Goneloco77]

Where can I find the tray to plug the hole ?

[@richmckie5793]

3D print testing going on now.

[@nocomment1379]

Have you fabricated anything for the shifter hole yet?

[@richmckie5793]

Not yet. Another element owner is working on a 3D printed solution.

[@MrSk8kat]

Do you know if they ever finalized the 3d printed cup for the shifter hole ?

[@ozalkl]

Any update on the 3d solution?

[@flecktarnation636]

Any tips on getting the dang thing out of the f150

[@richmckie5793]

As I can best recall- 4 bolts under the front cup holder panel, 4 screws inside bottom of the arm rest glove box (maybe under a piece of felt) and 2 bolts/screws on the front and rear lower sides. You don’t need all the AC tubes ans shifter base. All that can be left inside the truck.

[@johnsumner6185]

Is the F-150 armrest more forward than the E armrest?

[@richmckie5793]

I’d say the stock E arm rest is approx the same forward length as the F150, it’s jut wider for both passengers, and provides storage and more elevated cup holders.

[@johnsumner6185]

@@richmckie5793 What did you pay, I assume a junkyard part? i am seeing them online for $2-400!

[@AceSky01]

What year is your element, I have a 08 lx

[@richmckie5793]

'05 ex

[@miguelrodriguez2328]

Thanks bro, do you know the exact year?

[@richmckie5793]

Of the F150? Yes, 04-08.

[@Joomemes]

How did you gut it out?

[@richmckie5793]

Everting unbolts. Plastic tabs can be cut out by hand or like butter with oscillating tool.

[@holdbackurtears8829]

No wayyyyy

[@impdom3556]

What year F150?

[@richmckie5793]

It’s in the video title and 10 seconds into the video. 🤪

[@sdetweil]

how do you get this between the seats? did u assemble it in place? trying right now in an 07ex.

[@sdetweil]

got it in.. tight is quite an understatement.. on mine it sets off the passenger seatbelt

[@richmckie5793]

At 4:45 I explain this best.

[@canuckfixit7722]

Would an F-150 engine fit in an Element? LMFAO!

[@john091077]

Yes, in the cargo area if you remove the seats.

[@PackDaddyDaBreaker]

Not sure why alot do this .It fits to tight and isn't comfortable...

[@richmckie5793]

To each their own I guess.