Honda Engine Series: Explained

[@edwardwu2749]

B Series 0:06 K Series 0:57 D Series 2:00 H Series 2:45 F Series 3:41 G Series 4:29 C Series 5:33 J Series 6:31 Time markers! Like for everyone to see! :)

[@rajat.g6327]

L series?.

[@sksuppressor756]

WHAT ABOUT MY R18A1

[@amirkay]

@@rajat.g6327 L series from Wikipedia seems been also used in the new Honda Civic i-VTEC Turbo. Also maybe because most of it seems not marketed to US.

[@cedrictheveneau9141]

What about E series though ? No love for classic Honda :/

[@nepzski]

i would just watch the video

[@matthewstorm5188]

What was not mentioned here is that there are essentially THREE different types of engines commonly referred to as ‘F-series’. The TRUE F-series engines are the SOHC engines used in the Accords, Odysseys, CL’s and base Preludes. These were available as 2.2 or 2.3 liter engines. Then there is the F20B and F22B. These are actually H-series engines. The F20B is a destroked H22A and the F22B a destroked H23A1. Finally, the S2000 F20C and F22C are clockwise spinning engines which are essentially K-series variants.

[@dawidkenway5649]

1.8 was also used in the accords :)

[@0lz179]

Yeah, and there was 1.8 f18a3 available in europe. Very reliable but not very powerful. Also a couple of years later came f18b2 which had vtec and bit more power.

[@dawidkenway5649]

@@0lz179 i have an accord with the f18b2 engine and tbh i really dont like that engine lol its so slow at low rpms and it seems heavy it doesnt wanna go idk maybe theres just something wrong with my engine but i also had a d14 non vtec civic and it felt faster.

[@matthewstorm5188]

@@dawidkenway5649 Accords are 3000+lb cars. A 1.8 liter naturally aspirated engine in a car of this size and weight is going to be slow due to its lack of torque.

[@0lz179]

​​@@dawidkenway5649yeah well it is only a 1.8 after all. Reliable but quite slow. Atleast the f18b2 has 136 hp unlike the f18a3 with only 116 hp.

[@basithph8958]

For all those haters out there, there are some good Hondas out there with proper owners

[@Z4G.]

The Honda Tuner scene fucking changed when ebay builds came to be.

[@PeterM0911]

Haters are noobs, who can't see the difference between a car and a shopping trolley. I've worked on nearly thousands of cars in the last 20 years and I got into the japanese cars a while ago, as I realised, those are the best cars hands down. I've had Mazdas and Toyotas, but lately I got have Hondas. And I will never go back. I don't say, Honda will remain the best for ever, but compare cars since the 80's, apart from some of the BMW's, you can't go wrong with a Honda. Some blindfolded guys, who sware on VAG diesels, I just laugh on them. Peug diesels are far more superior compare to any german diesels, yet how popular those A4's nowadays? Anyway. If you want a good reliable and good performing car, with decent fuel economy, a compact little rocket or a family car, all of them are great.

[@unfairfight3625]

I totally agree,,my 1992 accord was incredibly durable, legendary solid,, we had a hailstorm it destroyed the exterior of many houses my dads newer accord had severe damage on hood and roof, next door neighbor had a new civic, it was totalled, mine dint have a scratch , it could take corners like a wild animal even when powersliding it gave incredible feedback and you always felt in control on dry asphalt or snow and ice.. Top speed was high,, it had tiny plastic bumpers, inside was high quality with great seats,, it was the most amazing car i ever had

[@ArnoId-Schwarzenegger]

Hoon-duh

[@ArnoId-Schwarzenegger]

Love honda. I just don't like honda fanboys. Talking and act like they king of tge world. Especially in my country, stock honda with fart can, diy cut-out spring, they making stupidly lud fart noise while driving so slow in bad roads, making traffic jam and all man fuck them, fuck you if you a ricer too, fuck

[@mrpsd590]

Let's give this guy a round of applause for being the first to explain Honda engines. And oh.. also what lsv is.

[@borginator1493]

Wish Honda would make a V8 VTEC engine for the public! Love their engines.

[@snoofayy6150]

i don't remember where i heard but they think V8s are too excessive for road cars, they'd only make a V8 for racing use

[@scottg1962]

Honda F1 has also used the Mugen 3.5l v10

[@Fidelitye]

@@snoofayy6150 you mean v10 and v12s. There are some v8s on most trucks on the road.

[@matthewgordon8199]

@@YoungOzzy432 a truck with Vtec would be an interesting sight to see

[@mrtoyotatrd6126]

Even if Honda made a full size V8 pickup I’d still much rather get a Tundra

[@granthamgarage2268]

I don’t have a license, so I bought an old Honda gcv160 lawnmower and I love to make it do donuts in my driveway. Love the video!

[@violentmetalhead]

My Civic came with a D16Y8 VTEC. The D may have less horsepower than a B. Torque was almost identical, 4lb-ft difference, but it peaked at a lower RPM. Making it well suited to hilly areas.

[@violetstill11]

I've owned an Acura Vigor G series 5 cylinder, and currently own a Legend with the C series. Both amazing engines with incredible reliability.

[@blueazure9658]

lucky man

[@ginjaman4784]

I Love you Man!!! All your videos are so informative and very enjoyable to watch. Been subbed for awhile. I believe you are a underrated channel. Definitely deserve more subs and likes cause I know finding engine specs and various car specs are not easy to find. Anyways thanks again!!

[@PistonAvatarGuy]

He's wrong about the F-series engines here. The FWD and RWD F-series engines are completely different engines, they don't share any parts. The FWD F-series engines aren't popular because the majority were low-performance, SOHC engines, and the DOHC versions are rare. THEY WERE ALL EXTREMELY RELIABLE ENGINES.

[@DripGxd_Cam]

My first car was handed down to me from my dad and i love it very much, it’s a 2007 Honda Civic . Non vtec. Not the most powerful engine but the car is pretty light weight, under 3000 pounds curb weight and it’s a manual so it’s still buckets of fun. The first car i want to buy with my own money is the 8th gen accord coupe v6 with the 6 speed.

[@thatboydakota9174]

D series Gang

[@quiet_benzy]

Yhuuu. Lil Honda del Sol... Or am I getting confused... Maybe it's a b series... No d series

[@dominiccruz5984]

@@quiet_benzy del sol had both options, mine had the D series

[@Jeffabelle]

This post was made by h22A1 Gang

[@the11th11t11]

😂😂

[@Jesser82801]

K24 gang

[@TillerMicroSkiffs]

Having owned Hondas as my first cars, i thank you for all the vtec growling throughout the video. Really brought me back!!! ❤

[@MrGunzngirlz]

Leave a like if you're a K series Owner!

[@mrsmagik1680]

Logλn L K24z7

[@MrGunzngirlz]

@@mrsmagik1680 K20Z3

[@elliot438bcfcVTEC]

K20a master race

[@jowellp.r.7577]

K20z1

[@MrGunzngirlz]

We've almost got all the interesting Kz series engines here. We still need a K20Z4 and K24Z3

[@aymaneoubad5057]

Hondas have bad réputation that they don't deserve because Of ricers but it also makes me appreciate à well tuned Honda when I see one à lot more or even the ones owned by the ''Gran Turismo '' type Of owners (the ones that keep 'em stock).

[@aymaneoubad5057]

@OwenMstar 45 yeah the Prélude is an amazing car i'm trying to get one myself you're lucky you have a treasure ...

[@crztank9298]

The f20c in the s2000 is no relation to the older f series

[@FallingStar1080]

It was inspired by the F20b.....

[@strlRnn]

@@FallingStar1080 */f22c and its not inspired at all by the f20b. The f20/22c is compared to the f20b because it's they are f series engines. But to say the fwd racing designed accord engine inspired the s2ks engine is entirely false. The s2000 engine is only f series by name and basic internal dimensions but is more off a k series and u can actually use a lot of k parts on the f20/22c. The F20/22c was/is drastically different from every other f and shigeru uehara designed the engine from scratch specifically for the roadster.

[@strlRnn]

Mark is right because it can be argued that the s2000s f20/22c doesn't fit in f or k series and should be categorized as it's own beast

[@FallingStar1080]

@@strlRnn A quick google search will reveal that the engine was indeed inspired and a close relative of the older accord and prelude's with the h23a and f20b engines found in japan. I never said they were a drop in swap or that they are interchangeable. You lack comprehension.

[@FallingStar1080]

@@strlRnn I used to be a big honda fan... but fanboys like yourself who have absolutely no idea what they are talking about half the time let alone turn a wrench convinced me that the fan base just sucks overall and that's why no one in the car industry ever take honda let alone their fans seriously

[@kitchenchronics5549]

Where is the love for D series? They can be fun too

[@stefandordjevic5812]

Ef D14a1 dual carb whit mini me mod 😁😁

[@josephroberts2555]

D16y8 crx

[@m7machines738]

I thought my accord was a D series but it’s an F series

[@josephroberts2555]

@@m7machines738 one time i saw a prelude at the junk yard that had a d series... I tripped out.

[@m7machines738]

Arcane Anomaly you sure it was a d and not an F ?

[@mattnoble1015]

C series Oil pressure drops off as RPM increases 5:58

[@SakiSkai]

Why does that happen? Can any mechanic here explain?

[@griffn14]

-SakiSkai-, the owner in the original video says it was a faulty pressure sensor.

[@Wabeeninc]

I mean i would be scared shitless

[@John.strong]

Its probably low on oil As the pump flows more with rpm it will push more into the head and not have as much oil in the sump

[@eksine]

@@John.strong dude the guy before you literally explained it, why did you try to make up an explanation?

[@kennethvance8896]

He missed the "R" series engines.

[@williamcricket7931]

Really? ;( I came here for that

[@williamcricket7931]

@@pandesal_mark There are other single overhead cam engines in this list........ And the r18a2/r18a1 have turbo kits available, as well as other parts.

[@williamcricket7931]

@@pandesal_mark So?

[@leeeeeee2796]

Its the most utilitarian and most simple engine, used in many hondas. Shame he skipped it. Its succesor to the d series

[@La-yt1wr]

He skipped R and L series.

[@jacobpoucher]

5:56 the way that thing loses oil pressure i betcha shes gotta spun rod bearing.

[@MultiDislikes]

I seen that wtf?

[@davidcraig7771]

Nope. Bad sensor; very common nsx problem.

[@budsbustbi6339]

i am old man!! i built chevys in my youth now i learning the hondas! and i would thing if it realy lost pressure like that it would seize as soon as they shut it off, so guessing bad sending unit?

[@Nskawtea1]

My brother's ITR keeps up with my G35 HR sedan until 3rd gear and then I pull away. They got balls for a small engine. I was scared too to lose this brotherly battle. But props to honda!

[@user-el5mg4it9t]

Don't let this distract you about the fact that Hector is going to be running 3 Honda Civics with Spoon engines.

[@jordanprice9285]

2:46 The best one :P

[@apexseal2811]

That 5-Cyl does sound really nice, out of the particular Honda sound!

[@loganlight7758]

Had a JDM h22 in my Civic eg hatch. That thing was a lot of fun

[@jamesearlcash7725]

I’m a Chevy guy, own two old school 350s one truck one car, a 6.0 “LS” in my daily 2500hd and 454 big block in a 72 Chevy Cheyenne. But I’m seriously looking at getting a civic si or a rsx s-type. I’m starting to like these little engines. Thanks for the info. 🇺🇸🤘😎🤘🇺🇸

[@coltoncaskey5781]

James Earl Cash I’m a big mustang guy and love ford, but I have always been mostly an American enthusiast but like you the civic si’s are starting to appeal to me a lot

[@PFab]

These are like supped up lawn mowers. Totally fun. Worth getting into trouble in these. I grew up with a little 90 hatchback Civic and that thing made some decent power for what it was. A few upgrades later and holy crap. It's hard to explain Honda's. Today I own 3. 2 5th gen preludes and an 2016 Odyssey. For a van this thing is sweet. At one point in my life I owned a 1996 passport. And that was plenty of fun as well.

[@crazeguy26]

I F23 swap my 92 Accord added a 72mm TB and a lightweight flywheel damn this thing got some balls.

[@dondadda1151]

Honda makes the best 4 cylinder motor in the world especially type R and I can vouch for that.

[@Jiilaker]

Truee

[@kvrfilms5008]

*CA18DET*

[@kingjahmus2037]

0_0 the CA18DET maybe a good turbo engine with 176hp but a b18c5 naturally aspirated engine with 195hp outperform that ca18det all day long.

[@izzy031096]

4age is the best all around 4banger

[@emersonpryor4766]

I have a legend got the c35a engine in it bloody good engine lots of power

[@MrGunzngirlz]

Never has there been a finer collection of engines.

[@moustachio334]

Thank god Honda clung to making NA motors as efficient as possible and proving that engine designs could be race derived and economical at the same time.

[@mikefelty2625]

Honda is notorious for creating new engine designs, but using letter designations from older, unrelated engines. The 2 best examples I can think of are B and F. In the late 80s, Accords and Preludes had a B20. They aren't related to the later B series mentioned in this video that mainly came in the Civic and Integra. The F series from the S2000 in this video has nothing in common with the earlier F series found in the Accord/Odessey/Prelude* in the 90s and early 00s. * Prelude engines were designated H22/H23 in most of the world, but in Japan, there was a version of the H22 that was designated F22. It was the same engine, just called someting else in Japan.

[@oscartirado8146]

Haha, 6:21 is in Tacoma, WA. I drive through this tunnel every morning in my S2k. Way to represent for the PNW.

[@escapenguin]

There was also a 2.3L H23 VTEC with an iron crank (vs. the H22's forged crank) called the blue top.

[@MikeyAF]

was it better?

[@escapenguin]

@@MikeyAF It has a lower redline and more torque down low. I wouldn't necessarily say it's better but I like it. Being able to light up the tires from a roll in second gear is fun af.

[@danksolution1693]

I built my d16z6 and I love it. Single jingle making 433whp 307wtq at 21psi.

[@Nightshade_42]

The H series also have FRM-lined (Fiber Reinforced Metal) cylinder blocks.

[@eriktruchinskas3747]

So it shits out pistons faster? Get it? Fiber? No? Ill see myself out...

[@Kenneth1350]

I prefer the f20b it has iron sleeve cylinders perfect for boost and its more reliable then a h series.

[@whitecb7coupe176]

Yeah the sleeves are frm. But it's actually reliable you just can't put forged pistons in it unless you do the whole mahle shit. But might as well just throw some darton MID sleeves it in bore to 89mm and send it

[@AcuraLvR82]

Reliability issues are more common in H series than F, due to the frm cylinder liners most H series have. One of the local guys in my area ran 10's on an f22 block with an f23 head all stock internals on ebay turbo setup. The F series have the strongest blocks but both H and F (except f20b and s2k) cannot handle high rpms as well because their larger blocks create a ton of crank walk (fluctuation in the journals) past 7500 rpm.

[@philipbahia7139]

I like my B series from the SiR B16A,although it may not have as much hp as the K series I'm still content with my motor.

[@369jwillow]

Thank you from a Honda for Lifer

[@toki89666]

Leave a like if you're an H22 owner.

[@rtroeun]

Dylan White I am!!!!!!!!!!

[@lcameeno1]

I had a 5th gen prelude with a h22a4 Loved it I currently have an rsx type s with a k24 block and k20 head And also i have a 08 accord coupe 6 speed J35

[@Ryan_christy]

F2b, with lsd :), ek hatch

[@johnconnor7501]

Josue Aguilar niiiiceeeee

[@toki89666]

I own a Straight H swap EJ1 Obd1 JDM H22A with M2F4 trans. About to upgrade to an Mfactory helical lsd and carbon synchros. And if i can save up enough, mahle gold pistons, rods, king bearings and BOOST.

[@BryBryProduction]

I was always interested in different series engines by Honda. Thank you for Making this video.

[@johnreed9366]

D16y8 has vtec brother no disrespect I love your channel

[@Elxmo]

The D15B from the EG VTi too, can't remember the engine suffix.

[@speedyme200]

Also d16z6

[@mal3762]

I believe the only d15/16 that doesn't have vtec is the A series, B and onwards has vtec isn't it?

[@CrayonsYummyYummy]

But D series is trash lmao

[@ratiomaciasjr7013]

Thanks so much for making this Video HONDA GANG! 💪🏼

[@aryasimon96]

VTEC KICKED IN YO..

[@dlb83082]

One small correction - the F20B is not related to the F20C/F22C, nor is it related to the F series SOHC - It is in fact a MORE RELIABLE Steel sleeved H SERIES (Smaller Bore - Longer Rods - Shorter stroke) In my opinion the best sleeper of the series - check out my Prelude F20B swap Fun Fact - the C30 was the first production car engine to come from Honda with Titanium Connecting Rods

[@SimplexSM]

The D17A1 is the best engine Honda ever made!

[@DeUnoReverseKaart]

I own a B-Serie Del Sol (b16A2) from my 1st ever car, with atleast 400.000 km on the engine. I was the mechanic that took care of it at the honda dealer before i bought it from the 1st owner. The original clutch failed at 270xxx KM so i bought it real cheap, fixxed it and its my daily every since.😁 The engine needed a body/chassis swap thoo🤣 Its as still in a del sol, but one that was once a esi/SI (d series.) only replaced the headgasket and cleaned the cyllinderhead once, because i experimented with ethanol and methanol🙃👌 only new seals,gaskets and 0 new bearings,pistons/rings/valves, all original and the gearbox has never been opend 0 probs.

[@vistastructions]

Honda is 😍 VTEC just kicked in yo!

[@El_Jefe_S3]

vistastructions life is to short to wait for vtec to kick in

[@tuchesampho2047]

@@El_Jefe_S3 you must have a slow sad life then lol

[@El_Jefe_S3]

Tuche Sampho lol you dumb dude? Turbo boost kicks in quicker than vtec 🙄🤦🏻‍♂️

[@uchihaobito9503]

Brandon Smit well no shit, put a turbo in a vtec then

[@davidgruen7423]

0:32 I was like damn son, that was hella fast, and I watched it again, km/h, ok nvm.

[@willdavids7075]

My personal favorite series is the F. Worked on A, B,C, D, F, H, J, K, L series. Wish they would go all timing chain but still love the J series. It’d also be great if they made a full size truck for the US market, but the transmissions would have to be beefed up to hand the extra torque and heat.

[@deson4958]

Why F series? Pros and cons?

[@willdavids7075]

@@deson4958 The F engines are super simple to repair parts are plentiful even today new/ used parts and they’re cheap. In my opinion the right amount of simplicity, economy, reliability, and although not the most powerful engine can hold its own on highway or street driving. Mated to a manual transmission they’re pretty fun to drive imo. Con to me having to change the timing belts every 100k miles which is not a huge problem as it’s just part of maintenance.

[@h1tnrun339]

@@willdavids7075 i wouldn't actually call this a Con since other cars are way more unreliable

[@lucasleonce100]

Best engine in the world!!!

[@El_Jefe_S3]

Lucas Léonce63 disagree

[@nemergix1707]

Tiens un kéké

[@AcuraLvR82]

Honda is the only common car maker whos engines can put out over 100 hp per liter, handle 9k plus rpms, and still rack up over 250,000 miles. Not even the last gen Toyota Celica could keep up with the Acura RSX, as their yamaha built engines would explode before the k series would hit vtec.

[@El_Jefe_S3]

Pretty Sure im sure they great at developing engine in the masses. However thats not what you were talking about. They are not the best engines

[@MrGunzngirlz]

Easily the best engines ever created.

[@sonyhk3824]

Very good information and interesting video. Thanks

[@achmadfajar6845]

One thing for certain, Honda didn't love Diesel Engine

[@otofoto]

Good for them. Diesels are nightmare in colder climate always have some issues.

[@usmcguida]

Honda N series

[@drifteradol86z]

i love the honda engines!!!! cheers and great video

[@googleaccount178]

Thank God for subtitles 😂

[@kanggoo57]

f20b6 here, its a pretty decent engine with 155hp SOHC, but it has no aftermarket, neither has my UK-spec -00 accord, which is why im trading it away

[@A7XBEAST21]

B Series stands for best series am I right fellas!

[@coreyjamesjernigan9751]

I'm getting a b next! I've had a k20 k24 and j30a so far the 3.2l v6 j is my favorite

[@2geekdup]

Cj James really? I love the j30 too!

[@m7machines738]

Cj James I miss my j35 accord

[@giancarlolugo9586]

@@m7machines738 H series stands for High performance High torque & displacement .

[@ravierclement2327]

Well, hem, N22A user here. Spit on me petrol heads if you want, but after nearly 6 years of driving (without any failure), I still love that engine (and my Gen 7 Accord). If however I had to retain 3 honda engines, for sure that would be C32B, B18C, and F22C. *is still dreaming about a 2000-1 NSX with a C32B 6s manual*

[@ethanjames558]

So im looking to get a 2001 acura integra base as my first car and was wondering what vtec head would fit?

[@ChrisB-bf4sq]

Ethan James b16 head, I also recommend a b16 tranny as well, I had an 00’ integra LS as my first car and that was my setup, b18b bottom b16a head with a b16 tranny and stage 2 clutch

[@ethanjames558]

@@ChrisB-bf4sq Thanks a lot man how hard was it to pull the engine out to put the tranny on? Also is there anything else I need to make the head compatible with the b18 block?

[@ChrisB-bf4sq]

Ethan James , it’s your basic Honda, I wouldn’t recommend you do it yourself if you don’t know much about doing it, I found it not too difficult but it depends on your level of knowledge, things that I recommend you know is how to Align a clutch properly and make sure you have all the right tools and equipment. The b series just like k,h,d,f series is interchangeable. B16 head is a straight bolt up

[@ChrisB-bf4sq]

Don’t get confused within my wording , b series is straight bolt on with other b series, h series is straight bolt on with other h series and so on, if you want to interchange others for eg, right now I’m running an H22A with a K20Z1 tranny to do such you would need an adapter bracket

[@ethanjames558]

@@ChrisB-bf4sq Hey thanks man I know a thing or two about cars probably the most in my sophomore class which is not saying much. Anyway what about wires. Such as an ecu and stuff ive heard people say I would need a gsr ecu but I thought id ask you you seem knowledgeable on the subject? Also sorry for bothering you so much.

[@Michael_Michaels]

The best of two worlds: 4:30 Honda G Series - Honda engine and a 5 cylinder block!!!!

[@mikegreen5393]

Mmmm what about b20 gold top the 1st b from jdm 1987 prelude SI 4ws 2gen and what about the A series usdm a20 found in 2gen prelude si

[@erikk27a]

K24a2**** for the tsx motor...specifically the 2006-2008 version ilsince it was updated.

[@six8810]

First from Brazil to see!

[@firsthandsome5888]

5:33 my farvorite Honda engine is C30A v6 because is provocative sound and like sound love sound in future if you find Nsx in Thailand It would be good to find but if you can't find Use a backup plan buy other sport car model and swap Nsx engine into other sport car model (If possible but not sure in future)

[@Crpjnr]

Any B-Series owners here?? ✋✋

[@jovanemontes80]

K20AI4 from 04 Integra/RSX type R on my 92 civic si. Had this swap back in 06 in my hatch wish i never sold it a few years ago

[@kynareth7thgod152]

EJ1 B18C JDM ;)

[@ramaizhassan4862]

B18C4 MB6 🤙

[@deschnippdistel1482]

B16 Ek4

[@tlrautomotive8410]

B18 b1 integra

[@harrynelson9203]

Just what i was looking for, absolute hero 👍🏻👌🏻🙏🏻🇬🇧

[@soulgen3681]

Are the K series much superior than any other series?

[@nezabytes]

I think they are even better than the new k20c1. The k20c1 omits the vetch on the intake side, which is terrible for us tuners who want big cams with factory idle(That's the whole point of VTECH). If in the future, Honda implements VTECH on both cams, then that engine will be king. Oh, and maybe take what Hyundai did and incorporate that into the k20C1.

[@otofoto]

@@nezabytes Learn to write VTEC

[@binskee677]

except the F20c, yes.

[@KT-fi7tm]

The F isnt popular because it's sohc and has low compression (meaning lower HP). Slap some pistons in it equal to that of an H and it will perform damn near to what an H will. The F is the economy version to the H, just as the D is to the B. The F22a is the epitome of reliability when it comes to Honda. Alot of tuners actually prefer the F block because of it's turbo piston friendly iron sleeves unlike the H which have FRM. It is possible to put an H head on an F block but it takes alot of work to do it right and really by that time you may as well have purchased an H. The F22a came in a jdm dohc version, very similar to the h23 nonvtec, just with 2mm smaller pistons.

[@kaelenvanvugt1305]

Where the R series man? Never forget the 1.8 iVTEC R18a1

[@Wigwhom86]

exactly what i came for

[@vincyshottastar4939]

Was waiting on this as well ,now I'm disappointed

[@themonolithian]

R series suck

[@williamcricket7931]

@@themonolithian You're the who sucks bitch

[@AP-wu1rv]

Is the C32B good from the NSX ?

[@tyablo]

what about L series?

[@berys76]

User996 nope it takes L's

[@siddheshgharat6300]

I think it's pretty newer, he should have covered it...

[@berys76]

Siddhesh Gharat is it the new turbo engine for the new civic

[@mahiru20ten]

Also the R series.

[@siddheshgharat6300]

@@berys76 yes yes. The Civic utilises the turbo version. The Fit/Jazz has the NA one...115hp @6600 rpm and 146Nm @1400-5500 range... Pulls hard and loves to be revved...

[@ShizaP]

Yes finally long awaited

[@wawewawe1316]

So I could put VTEC head in my Honda CR-V with a factory standard B20 engine to make it VTEC?

[@ethan12313]

Yeah gsr head.

[@ethan12313]

And get it tuned with a hondata s300 ecu or something. My buddy has a b20 block from a crv and a head from a gsr. With type r cams and a hondata s300 ecu

[@Gaby3Gonz]

Gsr or b16 too

[@speedyme200]

The heads you can use also is b18c Itr B16b ctr B16a Impossibly the B17 GSR

[@jimlucas0]

@@ethan12313 how much does it make like that?

[@thetreblerebel]

Thank for this video. Understanding hondas better now

[@sandrooliveira458]

Omg Honda 5 cylinder?

[@PressurenFlames]

Yup, sadly there was no 5 cylinder for the European market.

[@joakimvhes302]

It's sad, sounds like a good swap :/

[@toki89666]

Its the only family I have never seen before here in the U.S. it would not be a good swap at all because there is no aftermarket support, so unless you have pretty good fabrication skills and don't mind searching far and wide everytime you need a part...

[@joakimvhes302]

Dylan White I'm used to looking for parts, since I ride Honda MBX80, it's very rare where I live. Als I am a machinist and have qualifications for CNC machines, so I can make some stuff :)

[@ahmadmusa55]

It was inside the Acura Vigor (us market).

[@erhanmustafov1513]

i am Proud owner of D14A8,R18A2,F20C2

[@exothermal.sprocket]

Honda: tiny engine, million rpm, decent peak power (if you have patience), 3 ft-lb torque, noise that implies sound-barrier breaking speed.

[@paulstevens9409]

That's why the smaller engined high revving hondas like the civics have very close ratio gears...the torque is made in the gearbox

[@exothermal.sprocket]

There's just no feeling of power without solid crankshaft torque.

[@eksine]

serious question: If I wanted to make a reliable car, which car/ engine/ transmission combination do I choose that has the most durability/ reliability/ available parts? I do want an automatic transmission. which automatic transmissions are the most durable?

[@darkcrusher-jt1dr]

What about the tiny mighty L-series! 1.5L VTEC 4 cylinder that is in the Honda Fit!

[@mahiru20ten]

Not Hitler but the guy's right, he should've talked about the L series, also the R series

[@farhanaan123]

Not Hitler I liked his comment and also dislike your comment, case closed.

[@hank1556]

how do you know if someone likes their own comment?

[@TherealToppo]

Yea I cant believe he forgot the L smh

[@PistonAvatarGuy]

Yup, the L-series, R-series and (especially) the K-series are the best engines Honda has ever made.

[@GModBMXer]

Hope you've been doing okay, Visio. Thank you for the video!

[@toyotakp-36channel72]

pleaaase make a Toyota series engines tooo!

[@crztank9298]

And reference yamaha because they designed anything with a g in its nomenclature

[@raiderrichard7291]

I’m a proud j series owner 👌

[@berys76]

Mah honda d serie doesnt make power it makes powoer

[@lifepresent3183]

wtf is powoer

[@Vtoq]

Care to elaborate? Powoer?

[@skullservant8486]

Hey, great video, the quality obviously improved from your old videos so a deserved subscribe. Btw love this kinda video, talking about iconic engines and why they were iconic, with a few good vidoes of them in action. A great template you should continue. Tl;Dr: more videos like this!!!

[@janusmarais7580]

first

[@abbb4935]

EW single carb power 💪Thumbs up for E series!

[@ghislainpitre7899]

How Odd No Damn Acceleration

[@paulstevens9409]

The performance model hondas have great acceleration...and reliability to go with it

[@itzl5838]

F22 was popular for frankenstien builds my accord was a frankenstien build the vtec head from a preferably destroyed bottom end h22 fits perfectly on top and wiring for vtec is easy as well they make kits for it. Mine was turboed after 1 year of ownership. i did the frankenstien shortly before. i was makeing roughly 230 had a few power adders installed prior to the turbo walboro 255 fuel pump 750cc injectors stainless steel headers and hollow cats and an exhaust. i cant remember the company by no mean was it rice sounding had a super deep hum.

[@odysseas7705]

Honda guys welcome you to the fart can community...

[@farhanaan123]

A proper “bwaaaahh” sound is different than fart sound, case closed.

[@odysseas7705]

@@farhanaan123 couldn't agree more

[@dondadda1151]

Just another guy that got beaten by a fart can and can get over it🤣🤣🤣

[@jaguada26]

I love both my K20 & B16!!!

[@mariobarretta639]

Happy to see my ex Legend's acceleration on one of your video 😎😁

[@JuanCruz901]

love my k series TSX 🤟🏽

[@Ethan007Hacks]

Love your videos Mr. Visio!❤️

[@Skidz1818]

B series for life, FTW!!!!!!!!!!!!!!!!!!!

[@ErwinSchrodinger64]

What about the new NSX with the 3.5Liter DOHC V6 twin turbo. Is that a variant of the J-series engine?

[@Carstuff111]

As someone that has helped a friend build and tune his high compression LS/VTEC (B18A1 block/ported B18C1 head) engine and also has tuned it, the B-series is a marvel of late 1980's/early 1990's technology. The B-series engines truly feel like motorcycle engines in cars. The only disappointing B-series to me was the B20, at least bone stock. The rest of the B-series line, as long as there is a manual transmission backing the engine, they all feel great to drive from just off idle to red line. When I finally got to drive a well built H-series though, and felt the amount of torque that beast can make.....I kinda want to H swap my other Civic.... I can say I also truly respect what the K-series is able to do as well. Drove a friend's 4 door Civic Si with its K24 before and after some mods. I was not impressed with the car stock. With bolt-ons and a tune by Humble Performance, I suddenly wanted his car. Honda engines can be SOOO awesome with so little effort, and they tend to be pretty darned good from the factory.

[@AP-wu1rv]

I’m buying a EK and I was just curious what engine I should swap it with? I want something pretty reliable but can also make around 300 not too much power.

[@MrSamPhoenix]

The J-series is my favorite

[@dannyb20vtec28]

Pretty cool vid.. ran b series for ever but now run a K setup and love it.

[@elguezj]

What model of the civic wagon is that @2:29?

[@LUGNUTS]

Great info!

[@komisarrex1470]

the power of dreams💪

[@lescrooge]

Great video. I've often wondered about the opel ecotec range. please could you do a vid detailing this. thanks. love from South Africa