Honda IGX 800 10gpm 3000psi pressure washer | Power Washing | Pressure Washing | Faz Power Washing

[@ronniehaley729]

I went from 5 gallon to 8 and I was blown away , could only imagine the 10 lol

[@fazpowerwashing]

Let's just say I'm not as strong as I thought I was when I pulled the trigger on a 10gpm

[@powerfulimprovements]

Sweet set up

[@fazpowerwashing]

Thank you Joe👍🏼

[@jasontenney2786]

Nice rig just starting out running 5.5gpm bandit beltdrive and AR 45 softwash pump my next upgrade is going to be the igx800 dont kno if im gonna general pump or udor 10gpm thanks

[@RL-pm1dw]

Electrical cord, it’s longer battery cable. Positive and negative. 👍🏽

[@tywinter7622]

I bought the 800 to replace my 690 for hog barn washing out here in SD. The 690 had over 3k hours before it blew and Its turned all the way up for max power The 800 is way smoother and I put a 12.5 udor pump on mine and it's a beast. You have a really nice set up! My barns push 25gpm for water so I don't need a tank but this is my goal set up. I was just wondering what hoses you are using? Mine get pretty beat up from dragging over the rails and what not and keep blowing(I run a completely open system) I found some 2 wire poly coated but it's 200 for 50ft. And my barns are about 200 ft on each side. Just wondering what you were using and seeing if there are other options. Thanks for the video!

[@fazpowerwashing]

Yes sir been seeing a lot of washers switch from the 690's to 800's. As for the hoses we run are any double braided rated between 4000 and 5000 PSI. 100' is usually what we get, look into Dultmier Sales they have good products for pressure washers and their prices are wholesale. Thank you for watching bud we appreciate it!

[@tywinter7622]

Much appreciated man! I usually get my 6000psi hoses locally and my parts from dultmeier but the supply is lacking here Found some at Pittsburgh so I'm going to try those. I use to wash lots all the time then I found out about hog barns and stuck with that! Nasty work of course but glad I found it! If you are ever in SD and want some content on some hog barns lmk lol Thanks again! Much appreciated!

[@fazpowerwashing]

@@tywinter7622 Hell yeah brother I can only imagine the work it takes to get those clean, and no doubt I'll keep that in mind thanks again for watching and commenting man!

[@teraguillot5552]

You may need to get a gauge and check your spike pressure when you let off the gun. If the unloaded isn’t set correctly your spike pressure may be a lot higher than you think. This will cause hoses to fail faster than norma. You can Google how to properly set. Good luck bud

[@anthonymarzario7202]

You should always start and shutoff the motor at full throttle so keep that throttle lever all the way up. Just make sure it’s not under load when turning off

[@kdaltex]

Why? I usually start it slowly to give oil times to splash on everything and allow the pump to fully prime then run it full blast.

[@cartersservices3134]

Nice setup

[@littlespressurewashing]

Woohoo 🙌 nice set up bro

[@fazpowerwashing]

Thanks mane!

[@mattmcginn8415]

Better run that water back to the tank before the pump gets too hot 🔥

[@DDG-Downfall]

Is it eazy too make your own high pressure machine ?

[@fazpowerwashing]

Just make sure you get all the specs right for your engine and pump assembly.

[@tywinter7622]

Sorry to bug you again but just wanted to maybe pick yourvbrain if you're cool with it. Just wondering how you went about washing gas stations, Truks and more? The hog barns are going great but now i have 4 machines and wanted to put then to work lol

[@fazpowerwashing]

shoot me an email to ask questions.

[@hoffpauirconcrete.semperfidCC]

Nice

[@fazpowerwashing]

Thanks

[@mikeevansgutierrezcasanas6234]

Good for you bro..!!! Cool...!!!

[@fazpowerwashing]

Thank you for watching.

[@donaldniblett6323]

Good on ya.. It looks like the igx800 is replacing the gx690.. I’ve got 8 or 9 washers with the gx690 and new orders you can get either motor for small price increase. Any trouble so far with the igx800?

[@fazpowerwashing]

Yeah sure looks like it, just the wear and tear of the V-Belts definitely use the proper tips other wise it strains the belt drive.

[@waynehobbs9296]

Updating my drain jetter , not sure which motor 690 or 800 . 12 months down the track have had any problems ? I’m in Australia,

[@fazpowerwashing]

no issues, just maintaining the engine and unloader

[@mikebutler7476]

Great rig. Did you use any degreaser?

[@fazpowerwashing]

Yes Sir for Drive Thru and High Traffic Areas we buy it out of Houston, Tx called Black Scorpion.

[@cardinalprosoftwash]

Been following your channel for a while and its awesome to see you out here doing the damn thing! Keep grinding bro

[@fazpowerwashing]

We appreciate that brother, thank you for watching!

[@chazgeisler6213]

Hey, you lied to us! That’s an aluminum tank😂. Your good bro

[@fazpowerwashing]

Damn this whole time, your right sir. Mybad

[@santoschevez9076]

What pump do you use to send pressure from tote to the pump ?

[@fazpowerwashing]

check out my other video on force feeding pressure washers

[@Badgecamchronicles1]

Nice man what did you pay for this pressure washer

[@fazpowerwashing]

Thanks for commenting, it was actually financed but Total price for the unit and surface cleaner was $5,000

[@Unseeable..]

What size surface cleaner are you running?

[@fazpowerwashing]

Thanks for commenting We're running a Big Guy Surface Cleaner 28" 10gpm 4000PSI 4 Nozzle Spray Bar

[@Unseeable..]

@@fazpowerwashing quick question, do you downstream with you 10 gpm machine? I’m trying to figure out whether to get an 8 gpm machine or 10 gpm machine. I do a lot of big driveways and I downstream my house washes. I just never seen anyone downstreaming with a 10 gpm machine.

[@ryanduren2739]

Looks good! I have one also and love it. Wish I could send u pic’s of my sent up

[@fazpowerwashing]

Send them over man! 361-777-9140

[@calklobuchar]

Does that pressure washer have built in gfci

[@fazpowerwashing]

Honestly do not know, i figured that's only for electrical appliances.

[@jenkinsmonster]

What size bed is that?! Thanks man

[@fazpowerwashing]

I believe we have a 8ft bed Flatbed

[@Thetruthhurtstrump2024]

How much horsepower is that motor? I was told to get those specs I would need a 35 hp engine

[@fazpowerwashing]

It is at 24hp

[@otm646]

10 GPM at 3,000 PSI calculates out to 27 combusy horsepower. So they are a touch optimistic in those numbers.

[@jaredhiatt3875]

How do you feed 10gpm with the 275 gallon?

[@fazpowerwashing]

We use a 1in hose that's fitted to a Filter then fitted to a quick connect off of the tote bulk head.

[@patriciobermeo4634]

Cual es su costo de la moto bomba

[@fazpowerwashing]

fue 5,000 por la hydrolavadora y surface cleaner

[@Сокол818]

Привет ! Во время дождя как делаешь?

[@rabbitskinner]

Is that belt drive buddy? 10gpm awesome 👌

[@fazpowerwashing]

Yes sir Belt Drive All Day!

[@rabbitskinner]

@@fazpowerwashing I agree belt drive all the way

[@chrisgood9715]

Is that 1/2inch hose or 3/8?

[@fazpowerwashing]

That's 1 inch sir

[@chrisgood9715]

@@fazpowerwashing your high pressure hose?

[@fazpowerwashing]

@@chrisgood9715 my bad, yeah 3/8 high pressure

[@superblastpressurewashing.7256]

Killer rig man. Keep the content coming. Nice. I hit your bell and subscribed. hit me up brother.

[@fazpowerwashing]

Thank you bro, we appreciate the support #WashOn