Honda Lawnmower Maintenance - Oil Change & Sharpen Blade

In this video I will show you how to do a yearly maintenance on your Honda lawnmower. The service only takes about an hour and you can do the work yourself. Honda recommends using 10W30 motor oil for their lawnmower. If you don't need to sharpen the cutting blade, you should at least change the oil once a year. This will help keep your lawnmower running for many years.
======
Buy Honda 21" Gas Lawnmower
US: amzn.to/2qXKfk9
CDN: amzn.to/32J11ko
Honda 10W30 Motor Oil (2pack)
amzn.to/2DWV0q3
Honda 17211-ZL8-023 Air Filter
US: amzn.to/2GVhfiX
CDN: amzn.to/2Knty8F
15-Quart Oil Drain Pan
US: amzn.to/2VaMCdr
CDN: amzn.to/2OhcUZs
Multi-Use Siphon Fuel Transfer Pump
US: amzn.to/2NdDiCQ
CDN: amzn.to/2KnB7we
Neiko 3/8" Adjustable Torque Wrench, 15-80 Foot-Pound
US: amzn.to/2FO55s9
CDN: amzn.to/2m5xmCB
EPAuto 1/4” & 3/8” Socket Set - 69 Pieces
US: amzn.to/2Gnwb7k
CDN: amzn.to/2lp5t8f
P261 Impact Wrench Tool Only
US: amzn.to/2ojQ6hH
CDN: amzn.to/2n26rrK
P261 Impact Wrench Tool & Battery Combo
amzn.to/2pUvxW6
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

[@TungNguyen-vm9jg]

Lightweight is good and what did I use it for it’s a lawnmower

[@raspillade6027]

Anyone who takes time to make a video to help others deserves praise. I would not recommend lifting the mower to drain the oil though, because of the risk of back injury. Instead, just tilt the mower on its side, that works well enough. Also, although I haven't tried it yet, to drain the extra fuel left in the carb, one can also remove the drain bolt per the Honda manual.

[@ItsLRivera]

I got one of these used on Craigslist it was only a couple years old and I Iove it. I had been wondering what I should do to keep it up. Thanks for the great video.

[@craigg9700]

Thanks for the tutorial - followed this step by step with ease! Top man!

[@HandyDandy4u]

Very good video...you covered all the points needed for good annual maintenance or winterization. I will add a few tips based on my experience: First, a flat file gets a much more crisp edge on the blade and reduced the problem you pointed out with imbalance. Grinders remove metal faster and more unevenly and increase the imbalance problem. Filing takes longer, but gives a much better result and stays sharper longer. Second, there is a torque spec for the blade bolts. Honda suggests using it for good reason...you don't want the blade coming loose from under tightening. Third, while you have the plug out, it's always a good idea to spray some fogging oil in the cylinder and rotate the engine to get the cylinder walls coated. Fourth, I always take the screw valve out of the bottom of the carburetor bowl and get every last bit of fuel, sediment and water out. Last, I prefer a protectant that wont attract dust...like silicone or Boeshield and Honda makes a specific spray with carnauba wax just for protecting their power equipment.

[@kennycarter7469]

Enjoyed your step by step to pull maintenance on the lawnmower.

[@sunnysideandy]

Thanks for a great video that shows all the steps of maintenance. You set a high bar

[@AG-vq9dy]

Great video! Very clear and simple enough for folks to follow (and save some money in the meanwhile)! Thank you.

[@andymoorby9559]

Enjoyed your video, have been ripped off in the past taking my honda lawn mower in for a service so have taken up servicing myself and find your vids very helpful. Cheers from England

[@Shahzad5814]

Great video. I'll be doing the maintenance on my lawn mower soon. Thanks for sharing your expertise.

[@jmiles1960]

Thanks for the video. I have this mower and had no idea how to best service it.

[@carlitosway0077]

Great Tutorial, thank you for this awesome video :)

[@fedguy9182]

I use a Mityvac 7201 evacuation pump to remove the oil. Definitely saves my old worn out back. I also find that fluid film vs WD 40 is specifically designed to condition the plastic shroud and nexite deck. It also keeps the metal handles from developing rust in wear areas. Thanks for the informative video

[@maryw6835]

WONDERFUL!!!! Thank you so very, very much for the video!!!! One of the best I have seen on KZbin. Great information!!!

[@kevinblick9037]

This is a great video. Love this mower and want it to last awhile.

[@Harrylechat01]

I have a similar Honda mower in France and always had a problem with servicing because the local guy works on "first come first served" so you can be without a mower for weeks on end (and I always forget to get it done in winter). Now I feel prepared to spend a couple of hours enjoying doing it myself and save money to boot. Great video, thanks

[@burropoco]

Excellent video, very informative. Thank you for sharing.

[@smokesgtp]

Good video sir. Any quick detailer you use on the car is great on the mower body fyi. Important to show cleaning the deck with a hose as well. Should do that once every few mows.

[@billbutler9862]

Thanks, great explanation and detail

[@Buick59]

Good and concise, thanks!