Honda Pilot (2003, 2004, 2005, 2006, 2007, 2008) Rear Spring & Stabilizer Link Replacement Guide

In today's video we demonstrate how to fix problems with a Honda Pilot 2006's suspension by replacing the rear spring. While we're there we also show how to replace the stabilizer link.
The Honda Pilot was sagging due to years of abuse with trailer hitching. We're "upgrading" the springs with new ones!
a really nice set of most popular sized sockets: amzn.to/47eWW8G
[Required Parts]
Rear Right Stabilizer Bar: amzn.to/47gGmFw
Rear Left Stabilizer Bar : amzn.to/47aDfyX
Rear Spring (Set): amzn.to/48sCwdB
Rubber Mounts: 2 of each at hondapartsnow.com or any other online honda parts dealer:
Part No.: 52686-S3V-023
Rubber, RR. Spring Mounting
Part No.: 52748-S0X-A00
Rubber, RR. Spring Seat
[Required Tools]
Metric Wrench Set: amzn.to/3TA6c4c
HEX key set: amzn.to/3vaqOWx
Jacks (x2), any will do, but that's a good one, reaches far and lifts high: www.harborfrei...
Jack Stand, any will do, but this design is most stable and less destructive to surfaces: www.harborfrei...
[Helpful Tools]
Dremel: any will do
Cutting Discs: the ones designed to cut soft metal
[Music Credits]
"Lost Memories" by Ghostrifter Official
/ @ghostrifterofficial
[Recent Content]
Honda Pilot
Ait Intake • Honda Pilot 2003, 2004...
Rear Springs • Honda Pilot (2003, 200...
Stabilizer Links • Honda Pilot (2003, 200...
Rear Liftgate Struts • Honda Pilot 2003-2007 ...
Spare Tire • Honda Pilot 2003 2008 ...
Dishwasher Fix(es)
Solenoid Guide • GE Dishwasher Solenoid...
Water Sensor | No Water Fix • GE Dishwasher Water Se...

[@ogaremmanuel4032]

I have a similar car and my coil is broken close to the lower end. Will replace today and your video will go a long way

[@RobertMartin-ew1vy]

Looking forward to more Pilot videos. subscribed

[@KhamitArdashev]

More to come! The car isn't getting younger :-)

[@raidercat9830]

Very good video this will help me out a lot thank you!!!

[@RuslanVideoFilms]

Very helpful video, thank you sir PS “hanging by a thread” 😂

[@KhamitArdashev]

Glad it was helpful!

[@2005Pilot]

Great Job!! Thank you, Sir!! New Sub & bell rung 👍👍

[@GRAYYZ]

Excellent video! Was the spring a Honda or aftermarket part? Subscribed to your channel!

[@KhamitArdashev]

Thanks, it’s aftermarket MOOG, popular one on piloteers.org, links to all parts or part numbers are in description of the video.

[@RuslanVideoFilms]

I heard there are clamps you can use on the springs to keep them compressed for easier removal

[@KhamitArdashev]

ya, one could use something like this: amzn.to/3ZqWu4w

[@schifoso]

Nice. How about replacing the rear stabilizer bar bushings?

[@KhamitArdashev]

I don’t want to do that 😂😂😂 unless I have to.

[@schifoso]

@@KhamitArdashev I did my front bushings, which was a pain, and I took a stab at the rears but couldn't get enough room. Honda says to drop the rear subframe completely. I haven't found a video on the procedure...

[@pachillidundungizmooo3815]

Excellent video! Do you remember how much difference it was before and after replacement? Did you maybe measure it? Greetings

[@KhamitArdashev]

3 cm

[@thomasstorrs6345]

The problem everybody is having with this job right now is new honda rear bump stops are unavailable.

[@dolop4697]

3:13 😂