Honda Shadow Deca Riser Installation - HOW TO!

[@bones2405]

Really glad you're putting out these videos so regularly ...really inspirational to the metric riders man...keep it up...

[@bones2405]

Awesome man, as always, looking forward to what you come out with...I'm hoping to put some work into my Shadow 750 and/or get an 1100 this season and I'll definitely be ordering some parts from you man...

[@steviemensen]

Quick tip that helps is a little dab of oil on the drill bit and use a low speed and gentle pressure like a drill press so you get those awesome metal shaving spirals! Made a perfect pass through doing it like that.

[@thiaaghx710]

Thanks for the vídeo bro i needed to put one of these on my shadow.good winds from Brasil!

[@Turtlebay_]

Nice 👍🏻… I have a question any difference in vibration in the bars since the last rubber bushings were removed?

[@TJBRUTALCUSTOMS]

Yes, but I'd rather be able to control my bike than have mushy soft bars. It's not bad. A harley can get bad. You'll be fine.

[@DOCSSERVICE]

Keep it up TJ. Glad new videos are coming up.

[@HedblomSwe]

Why do you mix mm and inch? Its the same with the E-tank, quite annoying on nicely fabricated parts.

[@shanedewey462]

Do you know when the deca risers will available again

[@mrfatbeard5582]

Got a dumb question I have stock bar on a 2005 vt750ca would this be the same on my bike I did notice my bars go into the tree there is no risers I'm looking at putting 16in ape's so I do need risers and do you guys make cable and line kit if not or can you point me the the right direction

[@RunhdeepS.Sandhu]

Appreciate the vid Tj! Question - I own a 2007 aero which comes with welded stock handlebars as you probably know. Will the Deca Risers work on my bike? Are there spacers in my frame as well that will need to be removed? Thanks in advance.

[@RunhdeepS.Sandhu]

@@TJBRUTALCUSTOMS agreed..so will the deca risers you sell work on my bike? if so , I'll be able to find 1" handlebars for them

[@RunhdeepS.Sandhu]

@@TJBRUTALCUSTOMS thanks for the response....hopefully they're in stock soon enough..nonetheless when they are i will grab em

[@theodorsundin7080]

Great video ! If i were ro use 1/2 inch bults with a normalt clamb, would it works? This clamb kind of fits in the fork

[@theodorsundin7080]

@@TJBRUTALCUSTOMS sorry, im from Sweden and have a Hard Time with the Words for the parts. I ordered 1/2 inch screws to the riser i also bought. But on Honda Phantom there is to small spacers. So i was gonna drill the Hole bigger so My 1/2 inch screws fitt

[@kris1213]

These risers are awesome and perfect for the shadow. Will your new risers be similar to these?

[@curtisjackson7658]

Where can I buy the deca risers like you are installing in this video

[@Foxbodyguy91]

I have a 2000 honda shadow spirit vt1100c. I want straight risers, maybe 6 inches so I can install drag bars. I cannot find risers for 7/8 diameter bare anywhere. All I can find is 1" and up. I'm starting to wonder if my bars are even 7/8. Be gentle. I'm a noob

[@vulcan1358]

A cheap set of calipers from Harbor Freight will tell you what you need to know. Measured mine, they are 1” diameter

[@kevinholley4164]

Will these style risers fit a 09 Honda 750 spirit

[@frankiemccabe4602]

If I drill out the metal insert would there be to much room for the bolt? The risers on my bike have a m10 thread but I want to put a riser the uses an m12 bolt.

[@albe6102]

Hey man thanks a lot you did help a lot help me out a lot here but quick question do you have to have the bike on a stand visor v on the bottom well my story gets better. For the worse my nuts are almost ripped

[@TJBRUTALCUSTOMS]

sense. this makes.... none.

[@carlconnors7180]

I thinking on putting a 23” tire on my Honda shadow saber VT1100C2 you got any suggestions

[@iLoveArt10-u9e]

Would this riser fit a honda phantom?

[@johnathanlopez4042]

are the deca risers considered a universal fit and thats why you had to drill the spacers?

[@kevinlane3312]

Does this eliminate all the dampening? My 600 gets a bit buzzy about 70...

[@mid-ohioguardian6927]

Question : Anybody know the inside diameter of where the bars/riser sit in on the top tree ?? Thank you

[@TJBRUTALCUSTOMS]

what diameter are you referring to? im not sure

[@mid-ohioguardian6927]

@@TJBRUTALCUSTOMS At 1:54 the video shows a beveled hole in the tree

[@TJBRUTALCUSTOMS]

@@mid-ohioguardian6927 It's just the stock riser pocket. Our honda risers are made to fit it perfectly. Or if you want to run stock risers we make solid riser bushings. Here's a link to all things handlebars related! shoptjbc.com/collections/handlebars-controls

[@mid-ohioguardian6927]

@@TJBRUTALCUSTOMS Thank you !!!!

[@paigegriffin2337]

awesome video, will this process work with an '88 shadow 600vl?

[@MrKimo100]

I couldn't tell. But did you place flat bushings in there?

[@MrKimo100]

@@TJBRUTALCUSTOMS one more question..do your tbars come with solid bushings integrated as well?

[@michaelmullen6704]

Hey how are you doing I have a question to ask you

[@TJBRUTALCUSTOMS]

sweet!

[@meldurden8338]

I just ordered a set of custom t bars 12" tall by 28" wide and i ordered a set of your solid riser bushings. Do you have any videos using the solid bushings?

[@Williamcole10]

Will these work with other bars?

[@MHF_R6]

what size of washer are you using with the bolt in the bottum? :D

[@veasnachak3178]

Can’t find them in your store

[@TJBRUTALCUSTOMS]

They have been discontinued but I did make some brass and aluminum finned risers!!

[@steviemensen]

Why not use different hardware and tap & die on riser to fit riser sleeve so no drilling is required?

[@steviemensen]

TJBRUTALCUSTOMS gotcha! I was just curious. I bought these and installed them already as directed. Love them!

[@bbinkley1861]

So what about these Deca Risers? Where can I get them?

[@KarenKelleylucky]

Do you sell the brass ones in a 2" height?

[@TJBRUTALCUSTOMS]

We only did a limited run of the deca risers but we currently have some brass 2" risers available. Check em out! - shoptjbc.com/products/short-finned-risers-for-1-handlebars?variant=39417200967878

[@KarenKelleylucky]

@@TJBRUTALCUSTOMS Prefect - because brass is what I wanted anyway.

[@jamest8693]

Stupid question but Im waiting on some riserless handlebars from zombie performance do I need to drill out the stock risers like you did to install the new bars? Or do I just pop off the old handlebars and risers and I'm good to go? Thanks!

[@nathanielselvidge4157]

You ever figure it out? I'm curious

[@travish6034]

Very cool just one question is there a benefit to it

[@ryanmccue8180]

@@TJBRUTALCUSTOMS thank you for answering that TJ God bless ya

[@AJV4L2007]

What size bit to drill them out

[@Txj206]

Would these work on a 15 shadow aero 750?

[@TJBRUTALCUSTOMS]

Yes

[@phaq25]

why did you have to drill out the factory risers

[@theoutdoorsliving3949]

How tall are the bars on this motorcycle??

[@theoutdoorsliving3949]

TJBRUTALCUSTOMS thank dude just found you channel and love it. I Would definitely be doing some upgrades to my 88 shadow with your parts soon

[@uxthcman]

bro why do the risers on the site look way differnt then these in the vid?

[@tristanbrown121]

I appreciate you doing such a comprehensive series on modding this bike. I have the exact same model and I'm so inspired to make modifications. I had an small accident back in November and became quite discouraged get put in the work and ride again. I'm looking forward to getting these quality parts for my bike. Low cc Honda cruisers don't get nearly enough love and I've found your information invaluable years later. Is it possible to contact you or your shop for questions? Thanks!

[@robertbland8822]

What bars are those? bend a licous from zombie? They look sick!

[@CaliTom81]

You've got some great videos for the Shadow. Do you remember how long over stock the cables were for this set of bars?

[@juancarlosherrerareyes5032]

Lo

[@Иван-л5ц6н]

Поднятый на такую высоту руль - один из САМЫХ ИДИОТСКИХ видов тюнинга.

[@TJBRUTALCUSTOMS]

Thanks for the comment! sorry i cant read this!