Honda Shadow VT1100 Bobber build (Part one)

[@garyjohnson4575]

It's good to see people repurposing bikes, not just parking them and buying the next shiny thing. There are a lot of good engines rotting away because of fairing damage or a bent rim.

[@gregorytimmons4777]

Gets you off on the right foot budget wise too often times. As opposed to say, buying a new bike to start with. Of course some could look at that as short changing potential customers but not really, if : you are honest about the origin of the doner bike. Or you still are and do a total rebuild of the mechanical end. Don't laugh. Not everyone does. Still, if it's a stock Triumph some people will still whine that it became anything other than a stock restoration. For some sticking a hardtail on a stock Bonneville is like a dagger thru the heart.

[@bieda_enduro]

Great job :-) greetings from Poland

[@solimargarcia707]

Lindo trabalho estou impressionado com o talento da moto

[@toolsandtechniques6935]

Awesome video brother

[@warrensykes7382]

A shadow of a Beemer.

[@muhammedmustafademirbas1908]

masterpiece

[@sudeepchouhan5625]

Good job 👍, "Sv "

[@jackcl]

Cakep .. top

[@telugucity1700]

Super bike

[@crouchingwombathiddenquoll5641]

Handlebars are not high enough

[@georgebushskates2066]

Lmao 😆

[@Richy7010]

what fork and yoke did you use? is this the original? And do you know a fueltank from a 1988 fits on a 1985 frame? This is a awsome bike...

[@RawMetalRacers]

Hi Richy, Thanks mate! These are the original forks and yoke. I think the frames are quite identical, so it wil probably fit without massive modifications. Maybe another mounting lug, and that’s it.

[@Richy7010]

@@RawMetalRacers thnx 💪🏼

[@FMDful]

Ну куда такой высокий руль?😮 типа.... руки вверх - покажите подмышки😀😀😀!!!!!!!!!!!!!

[@gerardogarciaberodia1376]

Como quedaría una shadown con llanta ancha como una breakout?

[@jimwortham8634]

Soon as I saw the kugel ape hangers LOL new it was a phony

[@Saint_BehindAKeyboard]

Why is it soooo hard to find a replacement gas tank for these bikes!???

[@RawMetalRacers]

John Valenzuela John Valenzuela this is still the original gas tank!

[@santi9532]

I love your content. Im currently in the works trying to make my shadow phantom bobber project as well. I’m looking for a new custom speedometer gauge that can be attached to the handlebars. Do you have any recommendations?

[@RawMetalRacers]

Santiago Brazeiro good to hear mate! I personally haven’t mount a handlebar speedometer yet, so I don’t have recommendations!

[@Sensei948]

@@RawMetalRacers co ile regulacja zaworów trzeba robić w vt750s ?

[@davidglover7870]

What rear fender is that? I neeeeed it

[@nathanielselvidge4157]

Ok. I gotta ask. Did you drill and tap your frame for your seat pan?

[@RawMetalRacers]

We’ve drilled holes and then put some rivet nuts in them.

[@nathanielselvidge4157]

@@RawMetalRacers Awesome! I was just curious. Bike looks great! You inspired me to start my own build. Of course, i don't have anywhere near the tooling you have but i am trying to get to your level one day

[@RawMetalRacers]

Good to hear that! Everyone has to start somewhere. Just remember to enjoy every moment✌🏻

[@dylandubois8978]

I have the exact same bike and I'm putting 13" tall bars on it. Can't find extended throttle cables and hoses anywhere, where did your buddy/you get those?

[@RawMetalRacers]

Dylan, for the throttle cables and brake hoses you’ve got universal pieces in every length! I use MKX for brake lines. They have brake lines where you can put on any swivel you want.

[@moneymade4340]

Nice vid. But welding with the gas tank is a little dangerous.

[@RawMetalRacers]

Thanks mate! Welding is always done with the tank empty and ventilated for a long time with pressurized air.

[@moneymade4340]

@@RawMetalRacers oh ok. It had me worried there lol.

[@TomFromYoutube]

Pussy.

[@chinafernandez4960]

What kind of welding machine do you use?

[@RawMetalRacers]

I’ve got a Lincoln V305 AC DC

[@luis0luis058]

Friend, could this bike be fitted with a peanut tank? And would it look good?

[@RawMetalRacers]

The frame has two tubes at the top, so it’s quite wide. That’s probably why you don’t see them with a peanut tank

[@monomakes]

why put your protective glasses on the camera?

[@evinnice3321]

Bobbers don’t have Suspension

[@kellybrits5083]

Love the video, where do i get a RMR Cap from?

[@RawMetalRacers]

Kelly Brits , Thanks! The RMR cap is already made in several colors, but I'm working on a website/Webshop to sell them. But if you send me an email with your home address in it, I will send you the different models so you can choose! My email: [e-mail] Cheers!

[@littlevegawagon]

can you get the rear fender blank?

[@log2sym]

Where is your shop

[@RawMetalRacers]

scott anderson, my shop is in the south of The Netherlands!

[@jeffp.5080]

What thickness metal would you use to make seat pan, electrical, and battery boxes?

[@junkyardjedi7706]

"Road sign" aluminum works well for all that ! Its about 1/8" thick. Or 10ga. If using steel,12ga. Is good for seat pan. 18ga. Is good for the rest.

[@ДенисБудаев-в5к]

Honda v 1100 bober video

[@XXX-qk2cq]

Nice build but I have to ask, why the high mount seat. You are keeping the shocks why put springs under the seat? Now you have more seat then stock. You would be nice and comfortable with just the solo and you would get a much lower seating position!

[@RawMetalRacers]

Thank you The customer wanted the seat to have springs also for extra comfort when driving longer distances!

[@thewalkingdeadlife7006]

I don't care for Springer seats they are mostly used on hard tail.

[@Pindaaman]

Wat voor een borgmoer gebruikte je voor het achterspatbord als afstand tussen wiel en spatbord?

[@RawMetalRacers]

Pindaaman volgens mij heb ik hier M12 moeren voor gebruikt, maar tegenwoordig pak ik een motor ketting om de afstand te bepalen, deze leg ik over het midden van het wiel!

[@Pindaaman]

@@RawMetalRacers thanks je voor je reactie. Subje erbij

[@luillojailbreak]

Can a tanke peanut be installed on that bike?

[@RawMetalRacers]

You probably could, but you’ll have to modify it. The frame of the VT1100 consists of 2 tubes below the tank, a peanut tank is mostly made for a single tube frame!

[@luillojailbreak]

Raw Metal Racers If you're right but as I've seen many videos of 650 slings with that tanke I thought I could also see it ok thank you very much

[@eduardomelendez9212]

Trabajando en una Honda con camisa anuciando Yamaha

[@0726gf]

What rear fender is that?

[@RawMetalRacers]

It's custom made Lucas, no kit you can buy somewhere.

[@aekracing3726]

🇹🇭🙏❤️🙏

[@ГеннадийКовтун-р8у]

Л

[@CTuKC]

Зачем?🤦‍♂️

[@apongangh1654]

Nxt video pls don't make FF video

[@mickaelfredryck2849]

Bonne musique de merde qui prend la tête