Check This Out kzbin.info/www/bejne/q5ClaImgjtBqoqs
@krisbaglio51463 жыл бұрын
Do you have to score the edges to get the excess off or does it naturally peel off right at the outside edge of the emblem
@fixinit3 жыл бұрын
@@krisbaglio5146 You don’t have to score the edges.
@krisbaglio51463 жыл бұрын
If it's not coming off real good should I do another couple of passes or take it all off and start over
@fixinit3 жыл бұрын
@@krisbaglio5146 If it’s not covering just apply more coats. If you don’t like it, you can always peel it off.
@krisbaglio51463 жыл бұрын
@@fixinit ya it wasn't tearing at the edges of the emblem like in the video...so I'm starting from scratch.
@fitshamer11 ай бұрын
The title of this video should be how to black out your honda emblem. This isn't "fixing" it. You're just covering it up.
@returnowАй бұрын
well then what more do u want? why would u need to fix an emblem?
@sweets2thesweetshop3 жыл бұрын
Looks great. I already purchased the logo for my car so I'll just have my mechanic install it. If not then this will be my plan B 💕
@fixinit3 жыл бұрын
I bought an emblem too for a future diy video. 😎
@freedompioneer43113 жыл бұрын
@@fixinit doing the emblem replacement looks like such a pain!!! Sigh
@fixinit3 жыл бұрын
@@freedompioneer4311 Definitely a lot more involved than just Plasti Dipping it. 😀
@chris-lf7on3 жыл бұрын
Nice, was just about to rip and cut mine out. Thanks 👍🏻
@fixinit3 жыл бұрын
Thanks for watching!
@johnbayliss10988 ай бұрын
I'd like to see it in red
@kcmaldonado39483 жыл бұрын
Who are these companies using as suppliers for the steering wheels? My Mazda 3 is doing the same thing, and I'm seeing comments in this thread that it's happening to a lot of vehicles. You would think they would use a better process for what a new car costs.
@chrisryan8863 Жыл бұрын
That is nice. For mine I used a chrome paint pen and carefully painted the "H". I could have taped off around the H but I didn't need to by doing it slowly.
@mocahantasyabish2 жыл бұрын
I just did this and i kept beeping my horn 😂😂 neighbors was looking at me crazy! Thank u so much this really worked 🤗
@JaredWallin Жыл бұрын
Just wanna say THANK YOU for this video. I just got a 2010 Element where a big chunk of the chrome was missing. I followed your instructions and now have a nice matte black wheel badge instead. Looks so much better. You rock sir!
@tammiesnyder46705 ай бұрын
Our Element’s is rubbed off too. I’m trying this!
@nathan-f7p5 ай бұрын
i just used a black perm marker pen done the job
@gerard44413 жыл бұрын
gah fuck it, i think silver sharpie will do the trick
@amaliadianaespinoza69802 жыл бұрын
Did it work?
@JimmyCatlett3 жыл бұрын
This is nice! I like the flat black look but I am a perfectionist in restoring trim pieces back to factory specs. I would have probably popped it off and used liquid chrome for a more original look. I plan to do just that with my wife's Toyota emblem soon. But still... great job and it does look cool in black!
@fixinit3 жыл бұрын
Thanks for watching! Check this out kzbin.info/www/bejne/bJimg6CkZqp_p6c
@EXccord2 жыл бұрын
Unfortunately you cant pop these emblems off because they have plastic rivets in the back. It would require taking the airbag off.
@fixinit2 жыл бұрын
Yup but it’s not really hard to do. kzbin.info/www/bejne/bJimg6CkZqp_p6c
@replay2replay Жыл бұрын
Came here to also say, the emblem doesn't pop off, unless the airbag goes off, and then it's just glued to the middle of two busted sides 😅
@Jedi_Luke2 жыл бұрын
Good video. Pros would remove the airbag for easier access. It's pretty easy actually.
@fixinit2 жыл бұрын
Did that too. Check this out kzbin.info/www/bejne/bJimg6CkZqp_p6c
@lmw95624 ай бұрын
Or you can just buy a Honda emblem sticker online and stick it right over the old one. Did this for my Honda Pilot and it only took seconds and looks great!
@juniorramos98782 жыл бұрын
Or buy the jdm emblem that sticks on over that from eBay and not ruin your steering wheel airbag in case you sell the car one day. Jdm badges look better too…
@ElAndresRodriguez Жыл бұрын
Until you get in an accident and it turns into shrapnel
@filipineccc Жыл бұрын
Вот это рукажоп как можно так стремно и тупо делать у меня сын 7 лет сделал бы в разы лучше... Это просто треш
@Dlogains2 ай бұрын
Do they make any wraps for emblems? I have a Mercedes Benz doing the same shit
@CageyLeigh2 ай бұрын
Mine’s in great condition. I just want to black it out to reduce glare.
@natthaphonnoble7946 Жыл бұрын
I’d still prefer that shiny silver look but whatever
@bridamy7 ай бұрын
Guys seriously a brand new black steering wheel logo is cheaper and installs in minutes compared to this. Just plastic tool the logo off and glue on the new one. It's literally minutes.
@fixinit7 ай бұрын
The stock emblem is not glued on. I wouldn’t trust a stick on emblem to stay in place when the air bag blows up in your face at 200mph. But that’s just me.😎
@alainrj24 күн бұрын
Great job. I may just do this on my 2012
@Mr.Bearns2 жыл бұрын
If you want something more durable just use vinyl wrap very small piece of it it'll blend and corporate perfectly just use a exacto knife.
@CallforthePriest Жыл бұрын
Just found this video and great idea!! Im doing this!
@kavanah306 ай бұрын
So am i
@abcartagena19 Жыл бұрын
why not just tape in flush to the logo instead of peeling it off from the steering at the end?
@peterfoxwell5198 Жыл бұрын
Thanks. Easiest cheapest way to make an Ugly steering wheel H look great again.
@natalieterrazas27473 жыл бұрын
Mine has this kind of cancer too
@mitzyhustle15782 жыл бұрын
Now this is what I call a real DIY video brought to you by "Revlon" 🤣🤣🤣 great job bro🎯
@PatchworkRose567 Жыл бұрын
Thanks! I recently bought a used CR V and the logo is practically the other real imperfection about it. I’m tied between painting it by hand or buying a vinyl decal
@wauliepalnuts61342 жыл бұрын
*_SPAGHETTI ON SALE, 99 CENTS._* *_CAN'T BEAT THAT._*
@ofcuriousnature Жыл бұрын
I love when you beeped the horn! Made me smile. Can you paint over it with testers paint? I bought a bottle of red for my Mazda.
@fixinit Жыл бұрын
You can but it won’t be as easy. I would try using red duplicolor plus the duplicolor clear coat if you want it to look glossy.
@ofcuriousnature Жыл бұрын
@@fixinit thank you!! You’re video was super helpful. Appreciate you
@johnbayliss10988 ай бұрын
I would definitely paint the red also
@bobbyjones2112 Жыл бұрын
Do they make gloss black?, that looks really good!
@TheAgiovannym3 жыл бұрын
Dang! How often do you use your horn 🤣😂🤣😂🤣😂🤣
@fixinit3 жыл бұрын
😂
@maxjohnson88853 жыл бұрын
Just did this yesterday with regular paint. I should've used Plasti dip but it looks better either way
@freedompioneer43113 жыл бұрын
Just hit it with a little clear coat for a shinier look
@maxjohnson88853 жыл бұрын
@@freedompioneer4311 actually just redid it with plastidip, way happier with the results this time around. Cheers
@saabiq14415 ай бұрын
will it still be fine without sanding?
@fixinit5 ай бұрын
Should be ok. I just sanded to smooth the surface so it’s all even.
@peacequeen25792 ай бұрын
you helped me alot! I'm getting my 2012 Honda coupe restored with body work and paint job and noticed this same logo issue needs to be addressed too! thanks!
@karinphua9415 Жыл бұрын
Gosh...much better than removing the whole thing and changing a new plastic piece. Now look for chrome or black pen.
@JohnLerlo Жыл бұрын
Another way to fix it is to sand off loose paint and use a silver metallic Sharpie.
@BrandonBut1234 Жыл бұрын
Do you have a gear shift video? I need to repaint mine but dont want to cover the letters…. P R N D
@jeremybrewer61022 жыл бұрын
Why not just replace the emblem. Wayy to much work involved doing it the way you did lol
@narancs53 жыл бұрын
This is not a fix. It came out way different than before.
@SIDVENOM3 жыл бұрын
When are you coming out with a video about how to replace the emblem instead?
@fixinit3 жыл бұрын
It should be out this weekend. Thanks for checking in! 😎
@Art-B85 Жыл бұрын
It was black Matt or Gloss you use it on your steering wheel emblem ???
@Allengutz2 жыл бұрын
Thank you , exactly what I need
@donkeydiehard8792 жыл бұрын
Or just take the emblem out. If it breaks off pay $20 for a new one.
@nickeylodge79292 жыл бұрын
can you use any color spray paint?
@fixinit2 жыл бұрын
Yes. Any color plasti dip should work
@VeegovonDOOM Жыл бұрын
WTF?!!! It doesn't look the same, 😄
@matthewreynolds27782 жыл бұрын
Great job bro turned out great!! Thank you for this video😎👍👍
@mjpalmirojr.24662 жыл бұрын
If you want silver show me how that's done.
@Cali4083101N Жыл бұрын
I did the whole air bag came out great thanks 😅
@shawn9635 Жыл бұрын
I do think it looks better black
@phoebemateos40622 жыл бұрын
Going to make my flaking Mitsubishi emblem Pink!! This tutorial was sooo helpful thanks!!
@chinogeekseveryday37612 жыл бұрын
I thought this was a fix to restore to factory thumbs down for me
@fixinit2 жыл бұрын
Try this kzbin.info/www/bejne/bJimg6CkZqp_p6c
@nomorebang3 жыл бұрын
My older hondas H never had this problem.
@jorgevillacis81273 жыл бұрын
Hell No - that’s look horrible
@curtisbeckett4764 Жыл бұрын
Great job, have 2011honda pilot blk . Can you please do video on changing spark plugs and coil packs
@fixinit Жыл бұрын
I’ll see what I can do. Thanks for watching! 😎
@curtisbeckett4764 Жыл бұрын
Getting ready to do lower control arm. Watch your videos you make it look easy. Thanks
@curtisbeckett4764 Жыл бұрын
@@fixinit getting ready to do lower control arm. Your videos make it easy to work on. Thanks
@gunkanjima34082 жыл бұрын
Looks good! My Dodge Ram emblem blinds me when the sun hits it, I need to do this
@accordlegend29252 жыл бұрын
What if I dont have the sand paper and I gotta remove the chrome thing?
@fixinit2 жыл бұрын
You don’t really have to sand it. Just spray it.
@accordlegend29252 жыл бұрын
@@fixinit so it will remove the chrome?
@easylivingsherpa2 жыл бұрын
use the horn much?
@theniceneighbor Жыл бұрын
Great option
@Project_X_101 Жыл бұрын
Not bad 👍👍
@_Arisupdates Жыл бұрын
Awesome!!!
@naomiguzman3358 Жыл бұрын
Love it can’t wait to start
@ENFPerspectives Жыл бұрын
Looks good
@lesternanad38632 жыл бұрын
Best idea
@jimrodcart Жыл бұрын
Awesome job 👍
@adventuresofyodagaming22753 жыл бұрын
What instrument cluster do you have?
@crazysteve93902 жыл бұрын
Great job, thinking outside the box
@thisintangibleexistence2 жыл бұрын
VERY INVENTIVE
@NguyenBon5042 жыл бұрын
Where can i buy spray paint?
@fixinit2 жыл бұрын
Link in the video description
@antoinettecavagnolo40482 жыл бұрын
Thank you!
@piercepadre2 жыл бұрын
How long in between coats
@fixinit2 жыл бұрын
15 minutes
@BreeAbbie2 жыл бұрын
Can i use this DIY on my Mazda 3?
@fixinit2 жыл бұрын
Yup
@BreeAbbie2 жыл бұрын
@@fixinit Thanks a lot. Let me try this
@Lika120612 жыл бұрын
Thanks! Great idea!
@devjaxvid2 жыл бұрын
Great option! Thanks
@Steviesbestsong2 жыл бұрын
Thank you!!
@omarcaban99173 жыл бұрын
Looks good ,doing mine thanks for video
@quagengineer18773 жыл бұрын
What kind of paint you used? Why it didn't stuck to the steering wheel?
@fixinit3 жыл бұрын
It’s called PLASTI DIP. It’s a rubber coating. Not paint.
@michaelhuppman83403 жыл бұрын
@@fixinit do they make a chrome color?
@fixinit3 жыл бұрын
@@michaelhuppman8340 they make a bunch of different colors. Not sure about chrome though.
@abetterlookhomeinspections3 жыл бұрын
Looking good!
@beka59573 жыл бұрын
No I don’t like it i
@fixinit3 жыл бұрын
Thanks for watching.
@pragmaticoptimist462 жыл бұрын
Great video….except where do you get a newspaper? It’s like someone said “to hold this in place just rip apart cardboard sleeves from cassette tape singles. Everyone has those lying around right?”
@angelfinol9713 жыл бұрын
The Shining logo looks much better... 👎 Replace it
@freedompioneer43113 жыл бұрын
Way better than emblem replacement, Hondas are such cheap garbage 🗑 How does this even happen to an emblem you'd never have this issue with a BMW
@FirmTV3 жыл бұрын
What are you on about fam?
@uf31783 жыл бұрын
The only issue with the bmw is everything else
@krystallewis76063 жыл бұрын
I’m assuming this won’t work with regular spray paint?