Honda Z50K2 - final video #3 and ride

  Рет қаралды 2,372

MiniBike Mike’s Garage

MiniBike Mike’s Garage

Күн бұрын

Пікірлер
@fifteenhen5426
@fifteenhen5426 Жыл бұрын
My grandpa passed away last November, he has collected bikes like this over the years he had me on a bike just like this even the same color at a very early age, crazy to run across this video, he had to sell em unfortunately before he passed but I still got the 1975 Honda St90 K2 which is in pretty good condition, and his 1978 Suzuki 185 ts Thanks for posting these videos as it being back memories. RIP Michael skalla
@MiniBikeMike
@MiniBikeMike Жыл бұрын
Thanks for sharing.
@barrybazile1294
@barrybazile1294 2 жыл бұрын
I’m glad you are going to keep the bike for your grandkids that’s terrific I’m trying to restore my 71 Honda 50 that my dad got for me and my brother when we was a little boys we are the original owners of it my brother passed away my mother and my dad all I have left is my sister which she never ever got a chance to ride it that’s why I’m trying to restore it so I can enjoy it and my sister can enjoy it and she has a son where he can enjoy it because I’m gonna pass it down to him because I have no children and I also have a bad heart keep doing what you’re doing you make great videos
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks! It’s awesome that your bike has been in your family for so long.
@donsoule6411
@donsoule6411 23 күн бұрын
For a few laps outside the shop you were instantly transported back to being a kid again… all at about 10-mph !!
@MiniBikeMike
@MiniBikeMike 23 күн бұрын
@@donsoule6411 Isn’t that the truth. Hard to ride one of these little bikes and keep the smile off your face.
@gregweeks4980
@gregweeks4980 2 жыл бұрын
Nice job Mike. I enjoy these videos quite a bit. I also like to fix them up the way they are. Repair what I have to polish them up, put them back to original condition as much as possible and only paint where it has to be done, like the wheels. Very enjoyable to watch. Texas on the prairie
@geoffreyjones2000
@geoffreyjones2000 2 жыл бұрын
It turned out really nice, sir
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks Geoffrey!
@davidliste5961
@davidliste5961 2 жыл бұрын
Great Video Mike. Just finishing up my 71 CT70. Learn something new with every video. Thank You
@Smallbore2wheels
@Smallbore2wheels 2 жыл бұрын
Bike loons awesome. The new logo looks great too 🤙🏼
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks. I’m hoping to have some shirts before too long.
@mikeb6431
@mikeb6431 2 жыл бұрын
Great job Mike! Glad you decided to keep it! I’ve got a ‘69 I restored and it’s a fun little bike. No grandkids either yet, but possibly someday down the road.
@monkeyroo8740
@monkeyroo8740 2 жыл бұрын
Great video again buddy. It’s cleaned up really well. Looking forward to your next project
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks!
@franciscoolvera6871
@franciscoolvera6871 2 жыл бұрын
Turned out great! 👍🏾 Also just saw realized you found a logo for the Chanel after all. I like it.
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks! I had a subscriber In Argentina that stepped up and offered help. I have another logo, that I haven’t released yet. It will go on the back of T-shirts and this logo will be on the front chest area. I can’t wait to get T-shirts out there.
@gerardkenny8408
@gerardkenny8408 2 жыл бұрын
Once again another awesome project
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thank you!
@bennyammons
@bennyammons 2 жыл бұрын
Like the new logo
@areynolds2000
@areynolds2000 Ай бұрын
24:50 .. starts bike and goes for a short ride, cops show up immediately. haha... just like when I was a kid in the 70s.
@MiniBikeMike
@MiniBikeMike Ай бұрын
@@areynolds2000 🤣
@rustycrustytriesstuff
@rustycrustytriesstuff 2 жыл бұрын
Aw some video. Something I use for small engine exhaust is 3/4” and 1” emt conduit. Easy to bend and pretty inexpensive. Just make sure to clean the galvanized off before you weld it and don’t breath the fumes.
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
👍🏻
@jeffincabo
@jeffincabo 2 жыл бұрын
great job Mike !
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thank you!
@dougdavault4256
@dougdavault4256 2 жыл бұрын
Came out nice good little ride Th for another good video
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks!
@donaldkaderis5524
@donaldkaderis5524 2 жыл бұрын
Great job as usual
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks Don!!
@cainbeeping8480
@cainbeeping8480 2 жыл бұрын
Looks good brother.
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thanks!
@donaldcaissie
@donaldcaissie 2 жыл бұрын
Good video!
@MiniBikeMike
@MiniBikeMike 2 жыл бұрын
Thank you!
@jeffferguson899
@jeffferguson899 2 жыл бұрын
great video.
@SilverWedge
@SilverWedge 2 жыл бұрын
I laugh every time I hear one of those little engines run without an exhaust.
@gregoryzischke1843
@gregoryzischke1843 Жыл бұрын
Doesnt running motor with no pipe fry the valves?
@MiniBikeMike
@MiniBikeMike Жыл бұрын
I suppose if you ran the engine for a long period of time without an exhaust, yes, some damage could occur. But, for no longer than I ran it, it’s all good.
@bewilderment9268
@bewilderment9268 Жыл бұрын
Those things without exhaust always sound like FLUBBER.
@MiniBikeMike
@MiniBikeMike Жыл бұрын
🤣Yep
Honda XL70 - video #6……it’s done and it’s awesome!
53:21
MiniBike Mike’s Garage
Рет қаралды 2,2 М.
Getting a Chinese 125cc Engine to RUN!: Part 1
15:18
Mechanceism
Рет қаралды 744
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
The Honda ChopT70 goes to Texas!   MBM’s “On The Road”
12:42
MiniBike Mike’s Garage
Рет қаралды 1,8 М.
1971 Honda Z50 Mini Trail that I restored.
2:54
Locust Hill Classics LLC
Рет қаралды 330
Working on and Riding My New Coleman Mini Bike
15:02
Isaac M
Рет қаралды 435
Honda XL70 rebuild.  Video #3…..frame repair and parts cleanup.
56:43
MiniBike Mike’s Garage
Рет қаралды 2,3 М.
First video of 2025.   First start of a newly acquired Honda SL70.
23:26
MiniBike Mike’s Garage
Рет қаралды 3,1 М.
Restoring  Abandoned Motorbike Into a Mini Ducati for my son
52:48
Restoration T2
Рет қаралды 218 М.
Adding 12V Light System to a Motorized 66/80cc Bike
5:44
Rhode Island Roger
Рет қаралды 9 М.
Rebuilding a Honda XL70.  Video #2, let’s blow it apart.
37:59
MiniBike Mike’s Garage
Рет қаралды 2 М.
Honda XL70 - video #5…..it’s a roller!!
37:51
MiniBike Mike’s Garage
Рет қаралды 1,6 М.