Honeycomb shelf made from maple

[@gersonmelo9621]

Here, watching from Brazil, I can say Beautiful work. Nice Job!

[@tarigbadar8786]

It's a work of art, elaborate and beautiful... Thank you, it's an inspiring idea

[@graylanceariente8788]

Ive never seen design like this except the honeycomb design, but yours was great

[@Likewood]

Thanks!

[@virginiacohen5414]

Such a gorgeous and elegant design, you really have a great eye! And, such fine craftsmanship. Going to work on one for my place, thanks for posting!

[@BuildItSimple]

You made this look super easy. That is a lot of work. Good job.

[@Likewood]

Thanks!

[@pandraus]

wow... I thought for more than once "he is doing it all wrong" but then you impressed me, sir. great job, amazing finish and superb final result.

[@nikirox5296]

Absolutely gorgeous!

[@kerlianojeda977]

Good Job, I’m learning to make these, and I have to say that I really like how you made them, perfect! thank you very much

[@susannejacobs9218]

Love your design!

[@MollyGoesLightly27]

Gorgeous!

[@mariorenaud1]

Very nice, keep up the good work!!

[@wayneperryman4146]

Thanks for the inspiration, I'll be making two similar, mirror imaged versions of this for our place.

[@sethlael]

Love this design. COuld you share how you measured the internal pieces that had 3 joints vs the exterior pieces that have two joints?

[@Likewood]

please send me an e-mail at [e-mail] and I send you a drawing with dimensions.

[@ladykenja2700]

- Beautifully unique piece. Excellent craftsmanship. Thanx 4 sharing.

[@Likewood]

You're welcome, Thanks!

[@spy2778]

Great tools, music, & technique. I’m glad I found your channel!

[@Likewood]

Thanks!

[@anamecalledname]

This is where dec 2020 got me. I loooove the shelf!

[@incendi4ry]

I am obsessed with this! Great job, sir. I am envious of your skill. :)

[@Mostviews111]

Beautiful!

[@trashpanda5981]

Awesome vid! Finally found the video I was looking for with a “seamless” honeycomb structure. Where most people just stick hexagons together with obvious thickness at the joints you have showed me how to use 60 degree instead Thanks man

[@Likewood]

Thanks! good luck with your build.

[@chrisansari]

I came down to the comments to say the exact same thing. This project is very well done!

[@rodgerq]

This is what I was going to comment. It's a much better method.

[@alexkan8909]

Wow 🤩 so pretty

[@task82]

Wow, this is such a beautiful piece mate. Well done!!

[@Likewood]

Thanks!

[@miicelltechnosv7395]

Excelente cortes para hacer unión entre hexágonos! Muy hermoso trabajo

[@Likewood]

Thanks! Gracias!

[@GiulianoAlmeida]

Lovely and great job!!! Congrats :)

[@thomasdoherty7840]

Nice design!

[@Likewood]

Thanks!

[@oliverschwarz4594]

so cool. love it!

[@JorgeGonzalez-uh7wy]

Good job !👍👏🏻👏🏻👏🏻🙋🏻‍♂️

[@Tu-carpenter]

Good job ❤❤❤

[@christianmuller4027]

Nice project 👍

[@Likewood]

Thanks!

[@e.t.preppin7084]

Obviously a little more complex than this video presents however,well done nonetheless and I can appreciate the effort. 👍

[@PinoyWelding-EphraimShop]

very creative!

[@Likewood]

Thanks!

[@TheQuantumSparks]

Very elegant video,

[@Likewood]

Thanks!

[@garybrooks9508]

I like the use of a natural stainer, bees wax

[@7TH-JUNE]

More than Beautiful.

[@Likewood]

Thanks!

[@mainenterprise872]

Do you have the measurements you used? Would be great if there is a document outlining the measurements for each joint etc?

[@Likewood]

Yes I have. If you send me an email than I send you the datasheet by mail. www.likewood.nl/contact_lw.php

[@neatpleats11]

Very, very, very nice job. I always look forward to your video's. Thank you so much for sharing. Look forward to seeing the bees next time.

[@Likewood]

Thanks Scott, you are welcome. By the way, the bees will be actually b's like B and b. But you will see!

[@nelalvarez]

Great job. Awesome build. I liked when you used dowels instead of dominos. Thanks for sharing. Keep up the great work.

[@Likewood]

Thanks!

[@Space__Rooster]

Beautiful sir, a bit much for my skills but I'm looking to make something similar

[@KarthiKeyan-gl1eh]

Excellent design

[@Likewood]

Thanks!

[@bourenanemeridja819]

Good job bravo 🖒

[@nilsongutierresfilho2374]

Fantastic project. Thanks for share!!!

[@Likewood]

Thank you!

[@nkhs4860]

Hello sir, beautiful unique shelf. Can you tell what angles you cut where two shelves join Shelf#1 4:01 , 4:08 (top view) Shelf#2 05:28 The shelves seems to have V shape cuts and inverted V cut in shelf#2. I believe this is the question many of users are looking for from you. Thx

[@Likewood]

The V-shape has an angle of 120­°. I hope this helps you. Otherwise you can send a request for a drawing via my website: www.likewood.nl/contact_lw.php

[@quamealibaba2397]

What's the name of the machine you used to make holes in the wood please?

[@Likewood]

It is a Festool Domino DF 500.

[@mickey-qu7tk]

Very nice idea ill make some for my master bed

[@clubedaluta10]

VERY, VERY, VERY NICE... CONGRATULATIONS!!!

[@Likewood]

Thanks!

[@Rick16.7]

what do you call this furniture again?

[@heyimamaker]

Looks really nice, Almost like an abstract cloud.

[@Likewood]

Thanks.

[@Denis-Andrus]

Вы делаете потрясающие вещи..

[@Likewood]

Thanks!

[@kucherajosh]

I love the design! I’d love to have one in my home.

[@Likewood]

Thanks!

[@massimocalisti1416]

@@Likewood è possibile acquistare il progetto grazi molto bello.

[@Likewood]

@@massimocalisti1416 sorry to say that I do not sell this item.

[@evanduke1084]

what are the dimensions of each board making up the hexagon

[@Likewood]

if you send me an email I send you the dimensions. www.likewood.nl/contact_lw.php

[@aidanhughes1648]

Fantastic design. Love it! 👍

[@Likewood]

Thanks!

[@antoniorosendo5654]

Incrível !!!! Lindo trabalho..., trabalho de mestre. parabéns. !!!

[@AMbrosWorkshopTips]

Design is truly amazing..

[@Likewood]

Thanks!

[@oseali1467]

I'm listening to Ur video 😍😁 gr8 music job 😄

[@Likewood]

Thanks!

[@ImperfectionistGaming]

considering the shelves are just wood glue and wafers, what do you reckon is the max weight those shelves could hold?

[@Likewood]

I don't know. I think at least 10 kg. More than enough.

[@hmstjohn6236]

Beautiful, well done.

[@Likewood]

Thanks!

[@goodcoment667]

Fantastic

[@JuguemosconSentido]

Hello from Puerto Rico

[@marbellaarce7591]

Hola a cuantos grados es el corte de las tablitas

[@Likewood]

60 degree

[@marbellaarce7591]

@@Likewood geacias

[@dianeernest1660]

That was fantastic I’d like to have the plans for that build myself. Thank you and good luck to you!,

[@Likewood]

Hi Diane, thanks for watching my videos. I can send you a plan by e-mail. Please go to my website and fill in the contact form.

[@mikemaxodida6965]

That was so great a workmanship...may I have the design too, my email is [e-mail]. I like DIY projects

[@patriciogamin2815]

@@Likewood hola, soy de Chile.... genial tu trabajo, te felicito. Es posible, obtener los planos de este trabajo, te lo agradecería mucho.

[@websterisk]

@@Likewood I went to your website but could not find the contact form. I am planning a very similar project and would love to hear about what you learned before I start!... Bonus difficulty: no domino!

[@Likewood]

@@websterisk look at: www.likewood.nl/contact_lw.php for e-mail adress.

[@johnabrams9079]

Beautiful project. Though where three side join, which have dominos? It seems some connections must not be reinforced by dominos because the holes/biscuits would collide, no?! Is that true?! Or do you have a third domino in the middle to the adjacent piece? Thanks!

[@jorgezabala6271]

excelente trabajo, y bien explicado el paso a paso, te felicito !!! saludos !!!

[@Likewood]

Thanks!

[@easy_3d]

What power tools did you use to make slots for putting dominos?

[@Likewood]

It is a Festool domino router DF500. Hope this link works in your country. www.festool.nl/producten/domino-verbindingssysteem/deuvelfrezen/574325---df-500-q-plus#Overzicht

[@johnb7398]

Great job! Really like the shelf would love to make this for my son do you have plans available?

[@szabolaszlo7811]

Hello, what brand jointer is this please. Nice work

[@Likewood]

Dutch supplier: www.hbm-machines.com/producten/houtbewerking/vlak-en-vandiktebanken/hbm-10-vlak-en-vandiktebank-model-2

[@szabolaszlo7811]

@@Likewood Thank you very much. Please , are you pleased with it? The infeed-outfeed table are alligned? I want to buy one and every information is handy .Thank you again , keep up th egood work and off course, i subscribe to youre channel!

[@Svg891]

zier er super mooi uit! netjes :-]

[@samuelrodriguez9334]

Excelente 😘👍🇦🇷

[@raulgomes892]

Awesome job😍 can you share the plans

[@Likewood]

Thanks and yes, if you contact me via my website, www.likewood.nl/contact_lw.php , I send you a drawing with the dimensions by e-mail.

[@brandonmeade8999]

Excellent that . Being a carpenter myself I'm very impressed . Do yo mind if I copy this .haha

[@Likewood]

Thanks! And no problem when you make a copy of it. I made this to inspire others. If you want I can send you a drawing by e-mail. You can send your request via my website : www.likewood.nl/contact_lw.php

[@subrayans2787]

nice work bro....

[@Likewood]

Thanks.

[@mauricionarvaez1209]

Excelent From Ecuador

[@pemuda89tv]

Wooww amazing, its truly inspiring

[@The-Sentinel]

what tool is that that makes the holes in the end for the wood pegs?

[@Likewood]

Festool Domino: www.festool.nl/producten/domino-verbindingssysteem/deuvelfrezen/574325---df-500-q-plus But you can use dowels as well!

[@СергейКонов-ч3б]

Ещё бы примерные размеры а так супер😊😊😊

[@siriyeruva9747]

Can you please share the plans ? I would also like to build myself.

[@Likewood]

Done!

[@raulgomes892]

Hey do you know where he putted the plans?,

[@gmmi546]

Solo lo puede hacer las manos de un verdadero artesano que Dios. En diga sus manos y que sig haciendo trabajos como ese

[@Likewood]

Thanks!

[@zainalabidin6390]

Beautifull..

[@davidcooper574]

Very nice build. I like your clamps with the curved lever. What brand are they?

[@Likewood]

Bessey www.bessey.de type KliKlamp

[@LucasReis-ov7iw]

Love it! Thanks for sharing!

[@Likewood]

Thanks, you are welcome!

[@juanantoniobatista208]

Thanks for video, whats are your workshop dimension?

[@Likewood]

my workshop at home is 6 x 3 meter.

[@brasilvirals]

man, you look a lot like me, i showed it to my family, awesome

[@ipmtutos_oficial]

GRANDIOSA, SE VE MUY FACIL Y HERMOSA

[@ktran991]

How much do you charge to build one? Would love to have one. I don’t have the artistic eyes like you do, and neither the skills nor the equipment to do it. Beautiful!!!

[@Likewood]

Sorry to say that I am not selling this item.

[@dariuszkonofa578]

Dobra robota, brawo!

[@Likewood]

Thanks!

[@saowczarek7671]

Muito lindo o resultado final !

[@Likewood]

Thanks!

[@quethevan8745]

Hi, this is great, i am new to wood can you help with how to plan them. Thank you for sharing

[@Likewood]

Thanks. If you contact me via my website, www.likewood.nl/contact_lw.php , I send you a drawing with the dimensions by e-mail.

[@cristianleone9860]

Good project, can I ask a dimension of the single exagon?

[@Likewood]

inside hight of one hexagon is about 25 cm (10 inch).

[@JulioCesar-uu7zt]

Very good

[@Likewood]

Thanks!

[@gabyaguilar741]

nice sir.. can you tell me the measurements?

[@Likewood]

Hi Gaby, if you contact me via my website www.likewood.nl/contact_lw.php I will send you a pdf file by mail.

[@pratyushdas]

With enough patience and hard work (less money), can one do it with a regular circular saw, hand tools?

[@Likewood]

Yes, I think so!

[@DJOctober]

He put beeswax on the honeycomb shelves.... how did no one else in the comments catch this?! Finally, my time to shine!

[@Likewood]

Now you have to watch the next video where I make the bees for this honeycomb shelf. kzbin.info/www/bejne/mmqTlad7lLF6iZI

[@e.t.preppin7084]

Good catch. I noticed him using bees wax but my neurons didn’t make the connection. 👍

[@ماهرالبدراني-ك8ر]

عمل جدأ جميل

[@mabroukiayoub878]

Bravo

[@Gfffjhfjthdy]

greetings from Mexico

[@Likewood]

Thanks!

[@johnabrams9079]

Or are there no additional dominos when you connect each honey comb to the other?!

[@Likewood]

Hi John, Thanks for the question. No there are no dominos where three board meet. I can not use the domino machine in that configuration. that is why I used dowels instead.

[@johnabrams9079]

@@Likewood Thanks for your reply! I see/understand that you used dowels where the shelves connected to the honeycomb(s), though do you use dowels where 3 corners of honeycombs meet too? Thanks much!

[@crazedhark5200]

@3:45 can someone pls explain how did he make those joints to be glued between the wood to make the honeycomb shape itself, thanks :)

[@Likewood]

I do not understand your question.

[@Chandrahalimable]

I want to see your technique to making Mark from the shelf to the wall

[@Likewood]

I made a mark on the bottom of the shelf and transferred that to the wall. Than I drilled the hole 1cm above the mark on the wall. Thanks for watching my video.

[@luisrubenmedina5340]

Nice.....

[@Mr2at]

Clever build.

[@Likewood]

Thanks!

[@LDBecker]

Interesting technique on putting Domino slots at that angle - thanks!

[@martinhumaj5426]

Wáááw,nádherné,bravo,perfect

[@Likewood]

Thanks!