I Made two Wooden Beer Mugs |Epic Medieval Tankard

If you wish to support me and in the same time to drink like a true Knight, then find your favorite Epic Medieval beer Stein down below.⬇️⬇️
Cheers 🍻⚔️
reconst.etsy.com/listing/1723...

[@crazypaulshowto7700]

absolutely brilliant, got my weekend plans sorted now

[@Squerecycle]

Thank you, cheers 🙂👍

[@jackthehat8819]

Course cheese grater works well for prepping beeswax for melts

[@Squerecycle]

That is an excellent idea, haven't thought about that. Thanks 👍

[@orionj62]

Fantastic build! As a beer lover and beer brewer-ish on occasion, this was pretty cool! I now know one of my next builds and can't wait! Thank you! Very well done! Subscribed! Cheers!

[@Squerecycle]

Thank you very much, good luck with your build 🙂👍

[@shedmanx3640]

Spectacular video. I am truly impressed.

[@Squerecycle]

Thank you very much, I am glad you enjoyed it.

[@tony5316]

Awesome build! Came across my KZbin suggestions. Definitely gave you a follow and I'm going to have to make some of these!

[@Squerecycle]

Thank you, I am glad you like it. I wish you a good time building it 🙂👍

[@AlejandroRamos-hw1eh]

They look fine, just think the heat you use for the wax will also activate the glue lmao. Would've applied the finish before gluing, that way the glue comes out easily afterwards.

[@Squerecycle]

Your concerns make absolute sense, however a lot more heat is needed for the glue to be effected, also I used mineral oil and beeswax for the finish, if I applied the glue over that it would never stick or hold.

[@valentin3675]

Just beautiful

[@Squerecycle]

Thank you 🙂

[@MJLWoodWorks]

As a channel that is also into keeping usable things out of the landfill, I really appreciate your build! There are a bunch of us who are trying to create a community of like minded people. Keep building and keep in touch, you've gained a sub!

[@Squerecycle]

Thanks man, I appreciate it.

[@papillonwoodprint]

so, what a cool project! Compliments! Thx for the video!

[@Squerecycle]

Thank you, I am glad you like it!

[@krzysztofccc2705]

OOO!!! I czegoś takiego szukałem!!! Bez tokarki i innych specjalistycznych maszyn. Piękne, średniowieczne kufle do piwa! Brawo! Zdrowia i powodzenia życzę.

[@Squerecycle]

Thank you very much, I wish the same to you. 🙂🍻

[@SynthRockViking]

Those are really cool 😲

[@Squerecycle]

Thank you 🙂

[@gibbousman124]

Dude this is awesome!

[@Squerecycle]

Thanks man

[@rarecraftsman]

And as always awesome idea and an awesome video!

[@Squerecycle]

Thanks man, I am glad you like it.

[@thebigsebowski4645]

Excellent!!!👍🏻👍🏻👍🏻

[@Squerecycle]

Thank you! Cheers!

[@keithclark9767]

3.49 I am amazed that you still have all of your fingers.

[@Squerecycle]

It is the angle that makes it look terrifying, my fingers were on a safe distance from the blade 😁👍

[@evanpettis8219]

The whole video made me wonder how he has any fingers left at all, some very sketchy cuts were made, especially with the jig saw hahaha. Love the mugs though, awesome work to him

[@johnjacobjingleheimerschmi9997]

Jesus. Every time someone turns on a power tool, the armchair experts come out of the woodwork. As soon as I saw you cutting the angles, I knew there'd be QQ in the comments.

[@fathogwoodworking]

Awesome project. I’m deffenatqy making one of these. Thanks for the video, really enjoyed it.

[@Squerecycle]

Awesome, thank you 🙂

[@trianadanielm]

Super, but How you glued the handles together, Not seen in the video

[@Squerecycle]

They are just glued on, however for the next ones I made I reinforced the connection with a dowel. 👍

[@vichoespinoza5646]

Great!

[@Squerecycle]

Thank you

[@mercutilis]

Heh a "Recyclable" beer mug, love the athsetics.

[@Squerecycle]

Thank you 🙂

[@andrewgeyer2602]

Loved the video. I began playing again and i already did the walls how you did it but im definitely making the warehouse how

[@Squerecycle]

Thank you, Im glad it helped!

[@MASI_forging]

Look cool 😍😍

[@Squerecycle]

Thank you 🙂

[@RecklessRick]

The mugs look GREAT but come on spilling bear please L.O.L 👍👍😊😊

[@Squerecycle]

Thank you 😅

[@mtaybar5317]

Awesome..... cheers 🍻

[@Squerecycle]

Thank you! Cheers mate 🍻

[@rb-dahlb]

Cool project! Would it work also for warm drinks like coffee? Thinking on the wax coating on the inside if it will melt and get mixed with the drink?

[@Squerecycle]

Thank you. Unfortunately the coffee would melt the wax,it could also compromise the glue, this is only suitable for cold beverages. I would recommend a stainless steel insert for a wooden cup intended for hot drinks.

[@shanegibbens]

How where the handles attached? Didn't see that in the video, they just glued on?

[@Squerecycle]

Yes they were just glued on with wood glue.

[@wolen13_12]

The best way, is to drill screw holes, in both handle and side of the mug.small screw into handle from inside mug.

[@Squerecycle]

@@wolen13_12 yeah, or if it bothers you to see screw heads on the inside, another good method is to drill a hole (not all the way through) and use a dowel with glue. It would probably hold stronger than only glue. I just didn't think it is quite necessary, will see with time.

[@craighanus]

You could also replace one of the planks with a handle that’s configured and cut slightly differently.

[@BoogieGrows]

ill take 4 please and thankyou, mead and cider mugs.

[@AlekseyBondarev]

Класс👍 а музыка в ролике вообще бомба🤘

[@Squerecycle]

Thank you

[@firearmssanctuary2448]

nice, though i guess cold/room temp drinks only as i guess hot stuff would melt the wax coating?

[@Squerecycle]

Thank you. That is right it is meant for cold beverages, it can handle warm temperatures but not hot.

[@rodan_music]

Medival glue and tape. Would be nicer and healthier if you just used the metal bands and resin.

[@Squerecycle]

Hating on things you don't understand won't get you anywhere, however I appreciate you taking time to comment 🙂👍

[@doubled9361]

I liked your video, think I’m going to have to make a couple mugs. I didn’t recognize the brand of wood glue you used. Must be a waterproof PVA glue?

[@Squerecycle]

Thank you, good luck with your build. It is a waterproof PVA, It might be a local brand I am not sure.

[@dudeman5812]

What kind of glue did you attach the panels together with?

[@Squerecycle]

Water resistant wood glue.

[@StarKnight619]

awesome build one question though How were the Handles put into place? I know you say they were double-sided as temp but nowhere do you say how you made them permanent. unless I'm dumb that could be it

[@Squerecycle]

Thank you. You are right I left that out 😅. I just glued them on, I figured that will do, however I made a few more afterwards and I actually reinforced it with a dowel.

[@StarKnight619]

@@Squerecycle got it Excellent thank you!

[@demetriusgallitzin8859]

You win. :)

[@Squerecycle]

Thank you

[@jordanmesser7497]

how did you attach the handles?

[@adamsmith1267]

Most likely wood glue

[@Squerecycle]

They were glued on with wood glue.

[@neekosupp]

@@Squerecycle and that is enough strength?, total novice here

[@Squerecycle]

@@neekosupp well I think it is however I built a few more afterwards and I decided to reinforce it with wooden dowel, hat makes a much stronger joint. I just didn't want to have a screw heads sticking out on the inside although that would be te best way.

[@panossavvaidis6086]

this montage... did big stack d open a woodworking channel?

[@Squerecycle]

I take that as a compliment, thank you 🙂👍

[@anderswilliams7570]

Great video! 🤩🤩 How did you mount the handles?

[@Squerecycle]

Thank you, just glued on.

[@celenbris2833]

Would you mind telling what the thickness and width of the strips are?

[@Squerecycle]

The thickness is about 1cm and the width is 2cm

[@ivanyosifov2629]

Beer with glue

[@Squerecycle]

Thank you 👍

[@Cypher791]

🍺😊

[@Squerecycle]

🙂🍻

[@curtisdriggers742]

Why coat in bee wax? Is the glue safe to drink beverages?

[@Squerecycle]

For authenticity Beeswax is authentic method used for waterproofing in medieval times. Yes the glue is safe.

[@hairtrigga]

great woodworking, what a waste of beer during the pour? you rich or summat! :)

[@Squerecycle]

Thank you. Hade to do it for the shot, in my head it looked like worth it 😁👍

[@user-su5dq1gr6z]

Pretty fucking awesome!

[@Squerecycle]

You are awesome 🍻👍

[@siliconhobbit483]

I need a giant 440z wooden tankard. Any suggestions?

[@Squerecycle]

It is probably easier to build a bigger size you just going to need a whole lot more material. Good luck. Don't drink the whole glass att once 😁👍

[@Nojjan]

Norrlands Guld, instat like

[@Squerecycle]

😁👍🍻

[@RainLaw]

Is it dishwasher safe? 😋

[@Squerecycle]

Yes 😋

[@davidstout7846]

SICK!!!! I definitely can do this one!! NICE!.... Thank you man... You earned a sub and a like from me!!! David MaK15...

[@Squerecycle]

Thank you for the sub and like, I am glad you like it 👍

[@janineshaw7643]

How have you still got all of your fingers budy safety first in my book but nice job be safe

[@Squerecycle]

I guess it is luck 😁, thank you.

[@user-vc5rp7nf8f]

so many safety issues with this video

[@Squerecycle]

Thanks for watching

[@yukongtv]

what kind of wood?

[@Squerecycle]

It is pine and oak.

[@elielgoncalveslouro9684]

O amigo me desculpa, vc não gosta de cerveja, e não tá tão pouco preocupado com o conteúdo da sua caneca, batendo ela desse jeito para derrama, desculpa, vc tá preocupado só com sua caneca que fabricou !.

[@Squerecycle]

Respeito sua opinião 🙂👍

[@christopherluke9658]

Dude these are so poisonous.

[@Squerecycle]

Thank you for watching 😁

[@catgirl4499]

,why?

[@Vallery001]

Клей со временем размокнет и кружки потекут. Да и вряд ли контакт клея с пищевыми продуктами полезен для здоровья.

[@Squerecycle]

I appreciate all the comments and I am happy to answer to any concerns or doubts. There are different types of wood glue and the one I used is resistant to moisture, although in this case the mug is coated with wax so neither the glue or the wood should get in contact with water. The wood glue once is fully cured is considered safe for contact with food, that is how cutting boards are put together as well. Then again the mug is completely sealed from getting in contact with its content.

[@michaelfairchild]

As much as the beer mugs looks amazing, risking losing your fingers on the table saw is not worth it.

[@Squerecycle]

Thank you

[@_depRaven]

needs work on the beer pouring skills. too much liquid gold wasted

[@Squerecycle]

I'll work on it 😁👍

[@RyuJones]

Because he enjoyed too much liquid gold before he poured. 🤣 There's nothing wrong with that. ❤

[@Squerecycle]

@@RyuJones 🤣👍

[@Stone46988]

Liquid Gold spoken like a true drunk.

[@_depRaven]

it was a joke, chill

[@johnbrewer2206]

Cool but let’s not waste beer lol

[@Squerecycle]

Thank you 😁👍

[@JoeRoganful]

Video starts with a shitty pour. No.

[@Squerecycle]

👍

[@jimkelly8473]

I just cringe when I see those fingers of yours so so close to them blades. Other great video

[@Squerecycle]

Thank you

[@robertkattner1997]

So you did. Why post this video, we don't need to know.

[@Squerecycle]

Don't quite understand your comment, but thank you for interacting 🙂

[@mikejay8043]

How did you attach the handle?

[@Squerecycle]

Just a simple glue up.