HONEYWELL Home T1 Guide | Basic Manual Digital Thermostat | So SIMPLE & EASY to use!

Model TH1110D2009 - EASIEST non-programmable thermostats to operate!
+Stay tuned for more videos every week!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon Associate links below:
#CommissionsEarned
This thermostat: amzn.to/3pPxYxa
Contact: [e-mail]
Thank you to the following artist(s) - Music info/credits below:
KZbin Music Library

[@onefunthingdaily6539]

Stop saying it easy then we wouldn’t be here

[@jerseymontana1310]

Facts

[@jeans5658]

It is actually simple but more complicated than ancient devices. It is simple compared to devices that would be dependant on your stupid phones in order to operate. :) I hate phones.

[@meghanwilliams163]

Factssss Thank you!!!

[@parcargarage7509]

This video sucked. I’m pretty sure all of us here know how to use the simple functions and are looking how to use the more complicated functions

[@Charlie_Foxtrot87]

I turned mines off today and for some reason the cool option is not available anymore.. any ideas why

[@Krowwfather702]

I’m just trying to get my apartment to cool down. I have the ac on but the place will not go below 80 degrees. And the air isn’t cold at all.

[@valerieina]

I’m having the same problem too. Have you figured it out why?

[@TyTyslickster]

I'm having the same problem now

[@AtlSamuel]

Sameeeee

[@downrightcarnage]

Somebody pls help me

[@AtlSamuel]

@@downrightcarnage I called a maintaince guy to come out he had to reprogram it now it works

[@PrettiPetty24]

“Cool” keeps blinking air won’t turn on. It was on yesterday and just stopped coming on. Idk what to do help plz

[@shafiasimone]

Did you figure this out? I’m having the same issue

[@berenicegarcia2468]

Omg I’m having the same issue too!!! Just Happened last night keeps blinking and doesn’t turn on anymore ):

[@ellisperez7533]

Me too

[@lupenavarro3095]

My same thermostat the one at your display changed the Celsius and I need it to Fahrenheit. How do we get it back?

[@dorothyely7744]

I am literally having the same problem

[@TalonBugs]

The simplicity is in the design not the use…

[@PeggyWilking]

Can't get it to go to cool

[@dallis8827]

I have a question! When you changed the Celsius, what does it have to be at to be cold! Right now the top number says 225 and the middle number is 30. BUT IT WONT GET COLD

[@JohnFrancoNH]

You are in the setup menu. Back out of it to the main display.

[@MIDWESTKINGZ78]

Very useless video

[@estabanb55]

What happens if heat doesn't come on?

[@samanthageorge2617]

i accidentally put mine in celcius how do i get it back

[@BootTribe504]

My thermostat won't show the cool option anymore for some reason, and I can't seem too get it to come back up..

[@Goonies-xh3qr]

Why did you hold the plus and minus buttons down at the same time @2:45 to change the temp when you only need to press the plus or minus to change it? You are confusing people.

[@parneetbains8119]

HOW DO I TURN IT ON????

[@mackfittv]

it blinks bc it’s a time delay.

[@patb6929]

continue from previous comment .. then i try set to heat, set of fan auto set to off and won't turn off it's cool air do i need to change small number

[@REBEKITACHARLES]

Neither does mine and it's freaking how I don't even get a fan option

[@jeans5658]

I have just learned by reading manual that, when either heat or cool flashes, depending on the setup, sometimes it is a specifically set delay of 1 minute or so so to protect a device, cooling or heating that may have a compressor. The compressor needs a safety because, switching on command and off say, after a power outage, can damage a compressor. It is a delay safety feature built in the thermostat of about 1 minute delay before it actually activates.

[@PrettiPetty24]

My cool is flashing and has been since last night. I cut it off and on but the ac won’t turn back on

[@jessicazamudio20]

Thank you! Your comment was way more helpful 😂

[@alisatodreas4342]

Cool does not appear when toggling Mode!

[@Tony-gp6yg]

Yo, how do you think this is simple and easy when you have to go into advance settings to set the temp!

[@London100]

I'm trying to turn on ac but the temp # is locked. It won't change. SO IT IS NOT EASY!

[@victoriaevans8882]

Can you help me. This thermostat is set to 26 on the bottom and on top 200. It is very hot in Texas and I really need my thermostat to back to normal can you help me

[@ariannajackson6315]

Our is going from 10-35 and its hot asf, how do i get back to 68

[@priscillajohnson1446]

Tryna get the group home cooled down and its still not working smh. Got the window open

[@kerryanne9797]

How do i switch it from Celsius to Fahrenheit???

[@patb6929]

i have problem cant turning off. i set main screen ,(3 mode settings) set to off,, set fan auto, no small number showing then i try ..same thing with heat then then

[@joniroylance8729]

How do you turn fan to auto fan?

[@alexiaitaly]

not easy

[@victoriaevans8882]

I think it’s on ISU maybe.

[@at-l2318]

Can you lock this thermostat?

[@cristian7v]

I want to add 60 on cold but it would not changed it would just stay at 100 and when I press the negatives button it just stays at 100 and the + bottom moves up

[@JohnFrancoNH]

Thats odd, is it really 100 in that room? damn... does it say cool on? You could have other issues with your A/C system and not the thermostat

[@Scott.Roewer]

I was hoping to learn how to factory reset this model.

[@ericmaher1593]

There is no reset

[@TheJohnAbey]

thank you

[@konme88]

How to change f to c. Thanks

[@ericmaher1593]

Hold menu and when 125 pulls up turn it to 0 for f and 1 for c

[@marilynwick2965]

Excellent & understood.

[@DD-jb4me]

Mine, do not show the cool option 🫠