I use a bandsaw all day sometimes for my metal sculptures and have found going slower you get three times the blade life before they break and also don't over tighten in between they break less....and never buy a saw that doesn't have a coolant pump!
@37yearsofanythingisenough397 жыл бұрын
You never wear gloves when operating a bandsaw unless you want to loose part of your hand. The teeth only need to snag the glove ever so slightly and the saw will pull your hand in.
@tungs10655 жыл бұрын
I wear disposable latex that fit tight when working with metal. Otherwise I get tiny slivers of metal in my skin.
@imkindofabigdeal43083 жыл бұрын
Those aren't solely safety guards. They are for blade alignment and adjusted properly reduce/eliminate chatter.
@tungs10655 жыл бұрын
You guys need to get a coolant system. I think blades last a lot longer if coolant is pouring over the work area.
@simonlandon96162 жыл бұрын
Ellis Bandsaws are specifically "dry". No coolant needed.
@patrickirwin32303 жыл бұрын
Diamond Saw Chaffee NY world's finest saw blades 🇺🇸🇺🇸🇺🇸
@JP-kk5vw7 жыл бұрын
Run the saw this way if you want to go broke! Glad this guy had his certificate! LOL
@cintulator24 жыл бұрын
no liquids at all
@arthurbarrios8883 жыл бұрын
@@cintulator2 Ellis is a dry cut bandsaw
@SOLDOZER6 жыл бұрын
Only person who needs to meet with the instructor is you. I can see why you already chewed up a blade in a week.
@benjamindu43843 жыл бұрын
Thanks
@Dr_Xyzt3 жыл бұрын
Folks are complaining about the absence of coolant. Lol. When you have a wide blade in a longer saw, the blade isn't engaged in the material enough to heat up as much, so the absence of coolant really isn't that big a deal. Besides, it's a fab shop, not a production shop. If they're doing production cutting big stacks of chromoly bar stock, then yeah, coolant is mandatory. But cutting tubing or random pieces of bar stock isn't a big deal.
@dolyman77967 жыл бұрын
You’d get a lot more life out of the blade if the wire wheel just behind the cut were spinning and cleaning the blade as it cuts. Really, ask “the instructor”.
@Tiedy885 жыл бұрын
Where is the coolant?
@trentwood1449 Жыл бұрын
Is it normal to complain to a fellow employee about blade life and then just set down your bandsaw teeth on the workpiece?
@brentg.91817 жыл бұрын
Why did you also show certificate of Vertical Bandsaw when operating with Horizontal Bandsaw?
@jayorias37657 жыл бұрын
hey my idol
@SOLDOZER6 жыл бұрын
He needs to meet with the instructor.
@soudureextremum5 жыл бұрын
At 4:11 he put his fingers in the line of fire. Chance that the hydrolic feed give up are close to nothing this is an unsafe practice. Not trying to be an asshole here.. Safety above all. Great video by the way.
@ivissoncandidodearrudacand86814 жыл бұрын
Por que não tem legenda em português?
@cleanmachine083 жыл бұрын
I watched this because I do not know how to use a bandsaw. But hands in the line of fire, and wearing gloves, do not belong in an instructional video on how to use one.
@witharebelyell27622 жыл бұрын
I would grind the "bump" off with a diamond blade angle grinder. Funk that!
@2ndshiftaudio3002 жыл бұрын
I love the fact Ellis is an American based company. But, dry steel cutting in a production world will NEVER work. You will going through blades on a daily basis.
@ramnathborade37473 жыл бұрын
लेना है
@jamesmarquis56156 жыл бұрын
It’s pretty obvious your inexperienced at running a band saw. Why are you instructing?
@vince60565 жыл бұрын
No oil? Made me cringe
@arthurbarrios8883 жыл бұрын
Ellis is dry cut
@vince60563 жыл бұрын
@@arthurbarrios888 really? Learned something new
@mattwiley45302 жыл бұрын
You put your hand too close to the blade. Extremely dangerous
@patrickgreen9747 Жыл бұрын
This dude is “teaching” but says we’ve had this machine two weeks and we have already had to change the blade. Oh….yeah he’s wearing gloves to run a damn bandsaw. Give me a break.
@brentg.91817 жыл бұрын
Why you did not use coolant during cutting?
@jayorias37657 жыл бұрын
because you're stupid
@SOLDOZER6 жыл бұрын
Cause you dont have to. Thats why.
@mr.3phase2285 жыл бұрын
He could be welding
@ramnathborade37473 жыл бұрын
क
@danmitchell58972 жыл бұрын
This video is extremely vague and in general barely good entertainment and should in no way be used as instructional how to. Misleading abundantly.
@numeprenume5124 жыл бұрын
I was pretty sure he's gonna get roasted after this "ask the instructor" presentation. Dude, next time you show us the US flag, try a professional Bosch tool first!. Ask your instructor if you don't believe me. :p